Question about Kodak EASYSHARE 5300 All-In-One InkJet Printer

1 Answer

Koday Easyshare 5300 color printin problems

It only prints the cyan layer. I did a deep cleaning and that did not help, so I put in a new color cartridge and still only prints cyan layer. Help

Posted by on

  • mcyoung Sep 24, 2008

    Printer only prints cyan layer even though a new cartridge had just been put in.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 12 Answers

Check first the type of paper that you are using if it is compatible in your printer
if you are connected online, try first to update your firmware, you can do that by downloading it in kodak website www.kodak.com/go/drivers, the latest version is 71.650837, then install it in your computer.
after the upgrade restart your printer, then try to calibrate then deep clean of your printhead then print demo page. if it still producing the same result or problem.

contact AIO Tech Support 1-800-421-6699

by Ebrown

Posted on Oct 02, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Printer problem Koday Easyshare 5500


if you already tried a deep clean and there is no improvement on the printout then you need to buy a new printhead for your printer but if there is an improvement then do another deep clean until you get an acceptable print.

Nov 03, 2009 | Kodak EASYSHARE 5500 All-In-One InkJet...

1 Answer

MY KODAK 5300 PRINT PICTURES WITH RED SKIN TONES


The Cyan-yellowish color has either dried up or has bad nozzles. Take out the color cartridge and put in on a glass dish with 1/8 inch of warm water on it. After 5 minutes, wipe it dry with tissue paper or paper towel and try it in printer again. You'll probably need a new color cartridge, there is a large failure rate of cartridges from the mfg. and re-mfg.

Jun 28, 2009 | Kodak EASYSHARE 5300 All-In-One InkJet...

1 Answer

Color of the picture printed out is not the same as the printed


Your printhead has failed. Call kodak for a new one. They are aware of the problem.

Feb 24, 2009 | Kodak EASYSHARE 5300 All-In-One InkJet...

1 Answer

My printer is not printing very well.


You need a new printhead, Kodak is aware of this issue and will send you a new one.

Feb 22, 2009 | Kodak EASYSHARE 5300 All-In-One InkJet...

1 Answer

Kodak easyshare 5300 pics come out very dull with a green cast


Hi! I think there is some problem with colour adjustment of your printer. Under printer settings check out weather the cyan, magenta and yellow colors are all set to zero level and are at same position.
Also check out the exposure. And about dullness in the photographs i would suggest you to use a imaging software such as photoshop.

Dec 27, 2008 | Kodak EASYSHARE 5300 All-In-One InkJet...

1 Answer

Kodak easyshare 5300


hi, regarding your issue, try to reseat the black cart. for it is possible that the cart is just not seated correctly. if issues persist, do a deep clean 2x then try to print again.
you can do a printhead clean by following the steps below:
>press MENU button
>go down to CLEAN PRINTHEAD then press OK
>select DEEP CLEAN then press START
after the 2 deep clean try to print, if you are still having problems call support at 800.421.6699
you can also try this link:

http://www.kodak.com/global/en/service/repair/troubleshooting/troubleshooting.jhtml?pq-path=6198
hope this works for you!! ciao!!

Oct 21, 2008 | Kodak EASYSHARE 5500 All-In-One InkJet...

2 Answers

Printer problems


Sorry for your frustrations. Throw the piece of junk away and save yourself from recurring aggrevations.

Jul 12, 2008 | Kodak EASYSHARE 5300 All-In-One InkJet...

1 Answer

Kodak 5300 printer


1-Deep clean and calibrate the printhead
2-Try a firmware update @ www.kodak.com/go/downloads
3-Try a removal and reinstall of the printhead and inks
If all this fails, call Kodak Aio support : 1-800-421-6699 (USA)

Jun 16, 2008 | Kodak EASYSHARE 5300 All-In-One InkJet...

1 Answer

Kodak 5300 not printing colors


Kodak told me to take the printhead off and reseat it several times, which I did. I then deep cleaned it, calibrated it, and replaced the color cartridge. It didn't solve the problem. Kodak will replace the printhead for free, and after I return the defective one, will send me a free color and black cartridge. Very nice service. I've been very happy with the 5300.

Mar 09, 2008 | Kodak EASYSHARE 5300 All-In-One InkJet...

Not finding what you are looking for?
Kodak EASYSHARE 5300 All-In-One InkJet Printer Logo

163 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kodak Printers & Copiers Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

Michel Smith

Level 3 Expert

1218 Answers

Sajid Najmi
Sajid Najmi

Level 1 Expert

31 Answers

Are you a Kodak Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...