Question about Projection Televisions
Its the problem of capacitors and --ics-- in the powersupply board some of them must be blowned out so this problem.replace them by checking the faulty ones on power supply board.
Posted on Sep 24, 2008
Tips for a great answer:
Jan 22, 2014 | Zenith R57W46 57" Rear Projection...
Dec 13, 2013 | Projection Televisions
Sep 22, 2011 | Sony KP-53S35 53" Rear Projection...
If your Sony Wega will not turn on, the front green light blinks, you hear a faint whirring sound and the green light turns red and flashes, it probably means the lamp inside the set is no longer working. If you noticed the screen beginning to dim in the preceding days or weeks, this most likely is the cause.
If the green light flashes and the picture comes on momentarily but then goes off, and the green button flashes until the set restarts, then the seal around the lamp mount is loose and needs to be refitted.
If the picture on your Grand Wega cuts in and out and the green standby light flashes, both of the set's STKs need to be replaced. STKs are small chips on your television's circuit boards and are identifiable by their labels. The specific STKs used in your Grand Wega TV will be identifiable by the numbered labels on top of the STKs.
When you plug in your Sony Wega and hear a loud popping sound, it's probably caused by a defect in the high-voltage circuit. Let the professionals take care of this one.
If, after turning on your Sony Wega, you can hear your set but the screen is black, you most likely need to replace your projection lamp.
Feb 23, 2011 | Sony Grand WEGA KF-42SX300 42" LCD TV
Aug 19, 2009 | Projection Televisions
Dec 29, 2008 | Projection Televisions
Jun 28, 2008 | Projection Televisions
Apr 13, 2008 | Projection Televisions
Oct 12, 2007 | Mitsubishi VS-50707 50" Rear Projection...
Jul 28, 2007 | Sony Grand WEGA KDF-60WF655 60" Rear...
Dec 03, 2016 | RCA Projection Televisions
27 people viewed this question
Usually answered in minutes!