Question about Delphi SKYFi3 XM Radio Receiver

1 Answer

XM SkiFi3 My SkiFi 3 has no sound output??? I've tried through Home Kit, Car Kit and headphones, nothing. It will not play MP3's or recorded content. Screen looks fine, signal is fine, everything works but the sound ouput.

Posted by on

  • 5 more comments 
  • chaltertop Nov 03, 2008

    No sound comes out of the left speaker no matter which radio I hook it to. It doesn't matter if it is the car or home.

  • Mantle7 Nov 15, 2008

    Welcome to the life of owning a SkyFi 3. I'm on my third SkyFi 3 with the same problem. You need to call Delphi at 1.877.go.delphi and if you still have the original receipt, they will give you an address to send it to and then they will send you a re-conditioned one. They told me that you should not play computer speakers through your home kit, but no where in their literature does it say not to. I originally was doing that at work, so on the second one I did not, then I was walking with my headphones on one day and "pop" it went out. Just a really bad piece of electrical equipment, I will never buy another Delphi product.

  • Anonymous Nov 21, 2008

    yep same problem ....GRRRRRRRRRR ! HELPPPPPPPPPPPPPPP!|
    all is find : reception and everything but no sound ..and yes sound is turn on!!!!

  • marklan Nov 29, 2008

    I am on my second SKIFI 3 and again the sound output has gone to nothing.

  • cral Jan 04, 2009

    Same thing happen to me today -- worked great yesterday. Everything on screen was there receiving. Tried in both home units, and with headphones -- car unit freaks it out when its too cold so I didn't go there. Still no volume or sound. My issue is I have XM broadcast stored prior to adding SD card that I don't want to loose. Plus a car unit and 3 home units (upstairs, downstairs and work) for the SkyFi3. Replaced my MyFi with the SkyFi3 when the MyFi power button broke. SkyFi with car unit was only $30 at Best Buy at the time-now a lot more. I'm averaging just about 1 1/2 years with Delphi products. Question is -- where to go from here?

  • Anonymous Jan 26, 2009

    I am on my second SkyFi3.. Same thing, the output goes out and no sound. It only works via the FM Tuner. Will they still replace it even if the warranty period has ended?



  • fgrahek Feb 06, 2009

    My Delphi skyfi 3 will not recognize my SD

    frank

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

Interesting.  There is a thing called impedance matching.  If the speakers input Imped. doesn't match the SkyFi's Output imped. you can overload it.  Sort of the electrical analogy to drinking from a firehose.  Try charging it and using it on a regular line level input for, like, a stereo.

Posted on Dec 19, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Delphi roady2 SA10085 XM Radio Receiver with Car Kit


Sounds like its the dock itself. Have you tried using the home dock with the vehicle power or visa versa? This should help you confirm what the problem is. You can get a replacement power adapter here:

http://www.tss-radio.com/products/xm-car-power-adapter-for-6-volt-receivers


A cradle may be difficult to find, but TSS Radio can help you look.

Jun 05, 2012 | Delphi Roady2 SA10085 XM Radio Receiver...

1 Answer

Want to copy songs in my mifi xm to computer how? only have the 3.5 plug on my mifi


This is of course against the rules of your XM user agreement, but if you wanted to 'test' this out, just run the 3.5mm plug from your earphone jack to your 3.5mm 'LINE' input on your computer. Load the free program called "Audacity" on your computer, hit 'record' and you can record and edit the song, saving as an MP3 or WAV file. Again, this is against the XM rules, so this is all just theoretical okay? You would then need a program like Nero to take the MP3 or WAV and record to a blank CD. Just a theory though.

Aug 07, 2010 | Delphi MyFi SA10113 XM Radio Receiver with...

1 Answer

I have a XM delphi skyfi3 and I can record songs and listen to the radio portion fine. However, I cannot play my recorded music back on the my music mode, regardless of whether the xm is in the cradle or...


You must have a subscription and listen 'live' 8 hours a month, or it doesn't let you listen to recorded content anymore (thanks to the RIAA and their royalty fees to XM)

Jun 27, 2010 | Delphi SKYFi3 XM Radio Receiver with Car...

1 Answer

How can I download MyMusic from my INNO1 to my PC?


Thanks for the RIAA and the record companies suing everybody, the answer is no.
However, I wonder what would happen if you were to use the headphone jack and run that cable to a recorder...hmmmm?

Aug 06, 2009 | Pioneer GEX-INNO1 XM Radio Receiver with...

1 Answer

My XM recording plays but doesn't have audio.


Recently I had the same problem - could see it was playing on the screen, but no sound in the headphones. Pulled battery and reinserted. That solved the problem, whatever it was.

Jan 08, 2009 | Delphi MyFi SA10113 XM Radio Receiver with...

1 Answer

Broken SkiFi vs New SkiFi 2? Direct Replacement? Please advise-Thanks


The original SkyFi's display was quite difficult to see in the sunlight. The glare was too much. The new unit's display is a different material, and sunken in to alleviate the problem of glare.
The SkyFi2 also has TuneSelect. It was the first receiver to allow the user to enter the artist information for memory. Other units with TuneSelect only allowed song titles.
It also added a 3rd bank of presets, allowing for 30 presets instead of the original's 20 presets. SkyFi2 added the option of a stock ticker, or sports score ticker in the display. The original SkyFi's option of 3 different displays included the channel number only, to be displayed. Also, there is a built in FM modulator so you can set the tune on the reciever... and yes you will be able to use all of your accessories.

Oct 24, 2008 | Delphi XM SKYFi2 1016211B1 Satellite Radio...

1 Answer

S50 will not play audio for MP3, or stored songs


Visit here: read the whole page top to bottom...
http://shop.sirius.com/edealinv/servlet/ExecMacro?nurl=control/StoreItem.vm&ctl_nbr=2640&siId=601930&catParentID=7874&scId=7874&oldParentID=7870

Note: This product is no longer available for purchase. It is presented here for access to support documentation, software and related accessories only.

It sounds like you are having a software programming problem and may need to return it wma capble features may be corrupt.

May 01, 2008 | Sirius Satellite Radio S50-TK1 Satellite...

1 Answer

My XM Delph MyFi won't "record"


I get the same problem once in a while. Try removing the back cover and hitting the reset button via a paper clip--then try accessing the stored content. The MyFi should "release" the stored content.

Dec 13, 2006 | Delphi MyFi SA10113 XM Radio Receiver with...

1 Answer

XM 2 GO Not Playing


I had the same problem. I had to reset (use a paper clip into the RESET hole under the battery cover ( or pull out the battery for a a couple of minutes). Then, after recording some songs, I switched over MYXM and then began rotating the channel selector dial. The volume indicator arrow moved off zero and began advancing up the volume scale. I kept doing it until it about half way and my sound was back.

Nov 21, 2006 | Pioneer AirWave XM2Go Satellite Radio...

Not finding what you are looking for?
Delphi SKYFi3 XM Radio Receiver Logo

490 people viewed this question

Ask a Question

Usually answered in minutes!

Top Delphi Home Satellite Radios Experts

John
John

Level 2 Expert

473 Answers

xxxxxx xxx

Level 3 Expert

4706 Answers

yadayada
yadayada

Level 3 Expert

61037 Answers

Are you a Delphi Home Satellite Radio Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...