Question about Belkin Wireless G Plus MIMO (F5D9230-4) Router (1010835)

1 Answer

Forgott a security key

What can I do??

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 171 Answers

If you do not know the password to login to the unit through your browser, the only option is to reset the entire unit and reconfigure the entire unit. To do this press and hold the reset button on the back for about 30 seconds. This will reset the unit and the go to your browser and connect to the new gateway address, which I think is http://192.168.0.1. To Find out, right click on the wireless icon on your PC and go to detail and check the gateway address and login to that address. It will then walk you through the configuration screens.

If you need additional assitance, please do not hesitate to "ASK ME"

Posted on Sep 24, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Www routerlogin net


Only you, hopefully, should have the Security Key(password) to your Wireless Network. If you have forgotten the Security Key, reset the wireless device and reconfigure the wireless SSID and Security Key. You didn't post the Make, Model of device, so I can't be any more specific.

May 01, 2013 | Routers

2 Answers

How do I find my security key #?


Hi,

Welcome to Fixya. If you need the Security key or Network Key you need to access the Wireless Settings Page.

To access the router page just open a browser then type 192.168.1.1, the Default username is blank and the password is admin. Go to the Wireless Tab select Wireless Security under the Security Mode you will see there Network Key or Security Key. The Network Key serves as a password or security code on your network to make it secure
.

Thanks for using Fixya.

Mar 11, 2011 | Linksys WRT160N Wireless Router

1 Answer

How do I change the ssid and reset security


Hi,

Welcome to Fixya. If you need the to change the SSID and Network Key you need to access the Wireless Settings Page.

To access the router page just open a browser then type 192.168.1.1, the Default username is blank and the password is admin. Go to the Wireless Tab select Wireless Security you will see the SSID you can personalize it and under the Security Mode you will see there Network Key or Security Key. The Network Key or Security Key serves as a password or security code on your network to make it secure.

You can also reset the router by pressing the Reset button at the back of it for 15-30 seconds using a Pen and a Paper Clip.

If you have questions please let me know. Thanks for using Fixya.

Mar 05, 2011 | Linksys Wireless-G WRT54G Router

3 Answers

Where is my network security key


My friend,

You have to lo-gin into the router setup page .

1.Put this address (192.168.1.1) in the address bar and then you will see the router setup page.
2.Then this will ask you for the username and password.
3.Username is nothing so leave this blank and password is admin.
4.Then you will see the router setup page .
5.Click on the wireless Tab under the basic wireless settings you will see wireless security .
6.Click on the wireless security and you will see there your router wireless security key.
7.Always select Security Mode as WPA2 PERSONAL.
8.If you want to change the security key you can.
9.After changing the settings Click on the sav settings.

Regards:-
Amit Awasthi

Dec 09, 2010 | Linksys Wireless-G WRT54G Router

1 Answer

I forgot my password


If you forgot your user and password of router then press RESET button of router for 10 seconds it is in back side of router. Then all settings defaults. Connect your router to computer with ethernet cable then you can access it with following default link. http://192.168.1.1 or http://192.168.0.1 or http://192.168.15.1 or http://192.168.2.1 If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it. Then it ask for user name and password. Type user as "admin" and password as "admin" or "password" or blank. Then you can see configuration page of router. Then configure wan settings and lan settings enable wireless if you want to use wifi . If you forgott WEP password in wireless security note down the WEP code it is your password to connect wifi.Then save settings and restart router. Let me know if you need further assistance. Thanks for using FixYa.

Sep 08, 2010 | Linksys WRT120N Router

1 Answer

Forgot my password


If you forgot your user and password of router then press RESET button of router for 10 seconds it is in back side of router. Then all settings defaults. Connect your router to computer with ethernet cable then you can access it with following default link. http://192.168.1.1 or http://192.168.0.1 or http://192.168.15.1 or http://192.168.2.1 If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it. Then it ask for user name and password. Type user as "admin" and password as "admin" or "password" or blank. Then you can see configuration page of router. Then configure wan settings and lan settings enable wireless if you want to use wifi . If you forgott WEP password in wireless security note down the WEP code it is your password to connect wifi.Then save settings and restart router. Let me know if you need further assistance. Thanks for using FixYa.

Sep 06, 2010 | Linksys Wireless-G Broadband Router

1 Answer

When keying in the pin or key # do you have to use upper case and lower case letters


.if you are referring to the security key it depends on how you set it up in the security wizard at the initial setup
Security key can be setup with upper and lower case unless the manufacturer has specific rules for typing in the security key.

Aug 19, 2010 | NetGear Routers

1 Answer

What is the security key of netgear wireless connection?


Hi,

Security key in side the router. To get the key you need to access the routers web interface. Please follow the steps below on a wired pc. A pc which is directly connected with the netgear router using an Ethernet cable.

1. Open internet explorer and in the address box type http://192.168.0.1 and press enter. It should ask you a user name and password. User name is admin and password is the word password. click on login or ok.

If you don’t get user name and password window with http://192.168.0.1 and try http://192.168.1.1 or http://routerlogin.net

2. Click on wireless settings on the left hand side.
3. Under the security section if the security is wep then note down the key one and this is the security key you need.

If the security is something else then you wont be able to see the security key it will ******. In this i'll suggest you to change the security key to wep, encryption should be 64 bit and authentication type should be open. In the security key one box you need to type in the security key, The lenght of the key should be 10, you can only use a-f and 0-9. For example 123abc567f. and save the settings.

Try connecting on the wireless pc.

Note: if you change the security key then you need to connect all the wireless devices with the new key.

Hope this helps you!

Rashish.

Aug 16, 2010 | NetGear WGR614 Wireless Router

2 Answers

Brought a new laptop with wireless installed have a philips SNB5600 but have lost the security key how can i get the code


go to the wireless access point admin settings (not on your wireless adapter on your laptop). then check wireless security settings. if you see something there such as security key, that is the security key that you need to set up on your laptop. if security key is not visible, try to see if there is an option there which says unmask to show the security key, then copy it to your laptop. if all else fails, change the security key in the wireless access point and change all the wireless adapters that connect to it accordingly to the new security key you set it up.

Nov 07, 2009 | Routers

1 Answer

How to find old security key in case GT704-WG?


You simply access the router's setup page by going to Internet Explorer and type http://192.18.1.1 it will prompt your for password, try admin by default. You can change the security key under the wireless tab and look for wireless security

Jun 20, 2009 | Actiontec GT704WG Wireless Router...

Not finding what you are looking for?
Belkin Wireless G Plus MIMO (F5D9230-4) Router (1010835) Logo

Related Topics:

25 people viewed this question

Ask a Question

Usually answered in minutes!

Top Belkin Routers Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18299 Answers

steve morris
steve morris

Level 3 Expert

1673 Answers

Christopher Thrash

Level 3 Expert

425 Answers

Are you a Belkin Router Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...