Question about Sony Playstation 3 (PS3) Console

2 Answers

Display issue Hi,  Please go to this link to see the images.¤t=SDC10422Small.jpg ..some images to show alot of line that appear in the screen. It appear in de picture preview. All the while is ok since few month i bought PS3, however this effect appeared. I try change cable.. HDMI or av, its still same. And its also affect my visual game play as well. May i know whats wrong with it and do u hv the solutions?  Thank you.

Posted by on

  • darth_scott Sep 24, 2008

    I am having similar issues with my ps3. It seems like a GPU issue. I really hope someone out there has been able to fix this and can give folks like us INFORMATION on how to do it ourselves.



2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.


    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

  • Expert
  • 64 Answers

First, try a different TV. This will tell you if your dealing with a console issue or a TV issue. The sad truth is that 90% of the issues with your PS3 can't be handled at home. Now, if you had a soldering gun and a mother board schematic, it might be a different story. I'm not being wise, brah. But it's true. And without getting to look at your console and your TV, it's really, really hard to diagnose your issue. (By the way, the link you gave me was bad.)
Here's what I'll do: If you try a different TV and get back to me with the info. I give you my word that I will do my very best to solve your problem, Waiwah, OK?

Posted on May 28, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert that has over 500 points.

  • Expert
  • 359 Answers

Call 877-253-SONY and request an RMA for your ps3 system. Hopefully your 1 year warrenty has not expired or you bought the extended warrenty plan.

Posted on Sep 25, 2008



1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

No monitor display, power okay

Test with an external display. If nothing, there may be a GPU issue.

Jan 31, 2014 | HP Compaq 6735s Notebook

1 Answer

Memory card error


This seems to be a known issue with the Canon camera's to display Memory card error.

Give this a try
1. Remove the card from camera and wait for sometime ( 1-2 minute ) and re-inserting the card.
2. If this does not work, you need a card reader to read/view images on your PC ( since you are not able to access the card in your camera )
3. If you are not able to access/view the images from Card, click on the link below to recover the images from card - Recover images
When you open the webpage, click on the Download Now option to download the software ( it is free )
4. Try this fix to resolve the issue, Sometimes it takes long time for the camera to load the images and it results in memory card error - Click on the link to download the fix - Firmware Update
5. Try using a SD card with less memory like 1 GB card or max 2 GB for better access of card in camera.

Hope this is helpful.

Nov 05, 2010 | Canon PowerShot S3 IS Digital Camera

1 Answer

Display Image Issues

It seems ccd imager chip failure problem in your Canon A75 camera.
Canon offers free of cost ccd imager chip replacement for this model.
Click Canon CCD Imager Advisory for details.

May 06, 2010 | Canon PowerShot A75 Digital Camera

2 Answers

Infocus LP 70 projects a blurred display

Go to control panel and reset hardware configs that way.

Jun 29, 2009 | InFocus LP 70 Multimedia Projector

1 Answer

Have canon Powershot A75 3.2 Mega pixel camera .. Now it is having display issue. Once i open my camera lens come out power come but unable to see the image in lcd to shoot.. Can you assist

First try pressing the DISPLAY button. If that doesn't fix it then this sounds like it might be a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty status. Please check the following two links for more info:

Applicable cameras include:
A40, A60, A70, A75, A80, A85, A95, A300, A310, S1 IS, S60, S200, S230, S330, S400, S410, S500, SD100, SD110, IXUS V2/300/400/430/500, IXY Digital 200a/300a/400/450/500

Apr 16, 2009 | Canon PowerShot A75 Digital Camera

3 Answers

The display image unseen and the screen is dark

display shows ,saf, memory card ,charge symbols but not the capturing image on the display screen.After some time the camera is switches off.
It is sony cyber shot DSC- T33 .

Dec 10, 2007 | Sony Cyber-Shot DSC-T33 Digital Camera

1 Answer

Armada m700 no post


My name is Vikram Kumar Thumu, from India-Hyderabad. I have seen your message on the issue related to Display issue. . I would like to provide my suggestions on the issue. I hope that this should work for you and will resolve the issue.

To isolate and to resolve the issue please try below solutions....

***NOTE** Before starting below solutions I recommend you to RESEAT RAM in your PC, since it might help in resolving issue. Mostly issue related to display could cause of bad RAM.

Solution 1:
Please Restart your notebook and then use the Flash light( Torch light) to check if you can see any image on screen . If no image is seen , then it could be issue with Display screen or an issue with Operating System.

To confirm the issue, please once again restart the PC and then tap F10 key to boot the PC in to BIOS. Now, please check the issue even in BIOS, use same Flash light to check if there is any visible characters in BIOS.

if you are able to see characters in BIOS, then it confirms that is an fault with OS,,, then go ahead try BIOS Update, BIOS default... if the issue still persists use the recovery disk and reinstall the OPERATING SYSTEM in your PC.

If you do not see any Characters in BIOS, then it confirms that it is an fault with NB,(Notebook) please contact HP on this issue for SERVICE OF NB.(,(Notebook)


Press F9 while in BIOS and then once again press F10 . and then save/exit from BIOS

Please open below link in the new Internet Explorer. Copy and Paste the link at the address bar and then click GO. This will open a web page that titles as "Download drivers and software "

Link :

Once if you open web page, please select the Operating system that you are using, this will open a new web page. Now, click on BIOS option , If there is any BIOS update try to download it else. do not download.

This should resolve the issue for you.

If you need any further assistance on the issue, you can mail me at . I'll be glad to help you.


Nov 04, 2007 | Compaq Armada M700 Notebook

4 Answers

Black screen

First check your camera option press display button if not solved it is a hardware problem with your camera LCD, maybe move it wrong way please concern your cannon department.43a5872.jpg

Oct 17, 2007 | Canon PowerShot S1 IS Digital Camera

4 Answers

No image, No picture

From the Canon Website: Issue: The LCD/Electronic Viewfinder will not display an image. Solution: Special information regarding a blank or distorted screen on certain digital camera models Details: [ Hide ] Important Notice About Your Canon Product: It has recently come to our attention that the vendor-supplied CCD image sensors used in this Canon digital camera may cause the following malfunction: When the product is used in recording or playback mode, the LCD screen and/or electronic viewfinder may exhibit either a distorted image or no image at all. While reports of this malfunction have been rare in the United States, we have determined that it may occur if the product is exposed to hot and humid environments. Effective immediately, and regardless of warranty status, Canon will repair, free of charge, products exhibiting the above-mentioned malfunction if the malfunction is caused by the CCD image sensor. Canon will also cover the cost of shipping and handling in connection with this repair. U.S. residents are kindly directed to contact the Canon Customer Support Center for further assistance at 1-800-828-4040. Support hours are Monday thru Friday - 8:00 AM to 12:00 midnight; and Saturday 10:00 AM to 8:00 PM (all times EST). Alternatively, if electronic support is preferred, please send your email to This information is for residents of the United States of America and Puerto Rico only. If you do not reside in the USA or Puerto Rico, please contact the Canon Customer Support Center in your region. We sincerely apologize for any inconvenience caused by this issue, and appreciate your understanding in this matter. Thank you for your support and patronage of Canon products.

Apr 09, 2007 | Canon PowerShot A75 Digital Camera

Not finding what you are looking for?
Sony Playstation 3 (PS3) Console Logo

112 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Video Game Consoles & Games Experts

Zhenya Ogorodnikov

Level 2 Expert

218 Answers

shaun taylor

Level 3 Expert

1525 Answers

marley mcelhinney

Level 3 Expert

490 Answers

Are you a Sony Video Game Console and Game Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides