Question about Frigidaire Washing Machines

1 Answer

Code e70 comes up when it trys to wash - Frigidaire Washing Machines

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 409 Answers

Hi there,

can you provide the full model # off the washer?

Posted on Sep 24, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

AEG Lavamat 60810 keeps stopping and displaying error E50 and some time E70. What is the problem and how do I fix it?


Family error code E50 means a problem with the washing motor. Family error code E70 means a problem with the NTC sensor. In my experience, E50 is most common fault in worn carbon brushes. But in any case family error code E50 is shown to the customer. In service mode could be: E51,52,53 and 54. The same applies to family E70 error code that will be displayed in service mode as error code E71 or E74.
E50 error code could be: motor winding, power board, tachymetric generator, motor relay on power board, wiring between motor and power board and wiring between tachymetric generator and electronic.
E70 error code could be: faulty NTC sensor, wrong position of NTC sensor or to much limescale on it and finaly wiring between NTC and electronic.

Dado

May 05, 2015 | AEG Washing Machines

1 Answer

Aeg lavamat 63613 error code E70


Family error code E70 is shown to the customer. In service mode could be: E71 or E74
E70 error code could be: faulty NTC sensor, wrong position of NTC sensor or to much limescale on it and finaly wiring between NTC and electronic.

Dado

May 04, 2015 | AEG Washing Machines

1 Answer

Frigidaire washer LTF7000ESO error code E70


Good Morning Jazy, this is JK. I see that you are receiving an error message E70. The E70 error means that the Main Control Board is not seeing the correct water supply. I would suggest swapping the hot and cold hoses. Hope this helps!

Mar 24, 2014 | Frigidaire Washing Machines

1 Answer

Need help with Error Code E70


You could trace the heater circuit from the controller unit please check this link for tips to open the unit.
open control panel

Check heater element

Jul 02, 2012 | AEG Washing Machines

2 Answers

AEG Lavamat 76810 E70 7Beeps Does seem to still work but display shows E70 and 7beeps over and over. Many thanks gary


I Have AEG Lavamat 76810 E70 7 Beeps and Beeps never stops

The water was not hot
I took all the multi-plugs out and put them back in the whole machine ALL CONNECTORS
Now it works fine E70 is gone

Jul 14, 2011 | AEG Lavamat 16810 Front Load Washer/Dryer

1 Answer

Washes starts buzzing and blinking and says e70


The e70 error code comes on when the hot and cold water hoses are reversed or not properly installed.

Feb 21, 2011 | Frigidaire Affinity ATF7000E Front Load...

2 Answers

I have a fridgdaire front loading washing machine and the code e70 keeps coming up and the whole system will shut down what does this mean???


Hello,

You are going to need to download the Factory Service Manual for your Washer. This is a General Code, not specific to anything, You need to run the machine through it's diagnostics to determine the service code that is stored.

Once you get the service code you can narrow down and identify the issue.

Here is the Repair Manual Download Link

Thanks

Jan 06, 2009 | Frigidaire ATF6000ES Front Load Washer

8 Answers

E70 error


May 15, 2009

Hello,

I had this exact same problem with my Frigidaire washer (E70) as bubbles100. I called an appliance repairman on 5/14/09 and paid him $60 to tell me my hot and cold water hoses were reversed/not properly installed.

This repairman was the cheapest priced $60 and he would work till he found the problem. I had one appliance repair company wanting to charge me $90 for 30 min and another wanting to charge $120 for 30 min. Hopefully this information can help save the next person some money by trying this first.

Feb 16, 2008 | Frigidaire Affinity ATF7000E Front Load...

9 Answers

E70 error code repeatedly comes up when attempting to start a load and you have to cancel and restart 4-6 times before the load washes; again at the end of a load it will come up with the E70 error and to...


Means you are not getting cold water into unit..Either cold water hose is connected to the wrong hose or cold water faucet is not turned on..You can solve this by connecting hose to cold water faucet and cold water inlet on washer..

Nov 06, 2007 | Frigidaire GLTF2940ES Front Load Washer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

576 people viewed this question

Ask a Question

Usually answered in minutes!

Top Frigidaire Washing Machines Experts

Electrolux
Electrolux

Level 3 Expert

4342 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Are you a Frigidaire Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...