Question about Ricoh Aficio 1085 Laser Printer

3 Answers

Copier problume. there is a sc coed coming again and again after reseting the code is sc 550

Posted by on

3 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 162 Answers

Press the Clear Mode key.
Use the keypad to enter “107”.
Hold down Clear/Stop for at least 3 seconds.
The Copy SP or PM Counter items are displayed. The
Printer SP and Scanner SP are also available if installed.
4. Enter the Service Mode.
To enter the Normal Service Mode:
Copy SP On the touch-panel, press Copy SP.
After replacing the web with a new
one, reset SP1902 001 to 0 to
release SC550.
Or press feed there is the 1902 code.

Posted on Oct 21, 2009

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers


return SP1-902-1 to 0. Then, the SC will
be cleared.

Posted on Oct 19, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

In Ricoh 7950 Code SC 902

Posted on Aug 16, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

HOW DO I un-lock the scanner on a Brother MFC 7420?


Unfortunately, the MFC-7420 doesn't have a physical lock switch. You need to turn off the all-in-one and wait for the unit to clear its memory. If the error recurs after you press the power button again, wait 30 minutes and try again. (Note: you will lose any faxes that are in memory. See the User Guide page 11-5 to save this information.) You can find the manual on the Brother support page for the MFC-7420: https://www.brother-usa.com/support/ModelInfo.aspx?R3ModelID=MFC7420 . Click on the Manuals & Documents tab. Then click on the Manuals on our Online Solution Center for the English version of the manual. The direct link to the User Guide is currently: http://download.brother.com/welcome/doc000387/ALLFB_UsaEngUsr_B.pdf .

You can also try unplugging the all-in-one for several minutes to reset the error codes. If the error persists, contact Brother if the MFC-7420 is still under warranty (1 year). If it isn't under warranty, consider replacing the unit. The repair costs may be unreasonable.

I hope this helps.

Cindy Wells

Jan 09, 2017 | Brother MFC-7420 Printer

1 Answer

How do I correct error h5 on a Sharp printer AR-5620N?


Hello Sudhir,
The error code H5 means there was at least 5 pages in a row where the paper did not come out of the printer correctly (most likely paper jams. The following manual will direct you on the steps needed to clear the code, please note especially page #8-3
Service Manual SHARP AR 5618 5620 5623 SME

The following video should help also;

Jan 09, 2017 | Sharp Office Equipment & Supplies

1 Answer

My sharp color copier Mx 3100n is indicating F2-73 after using 88-1 how do I restore it


Hello Tijjani,
The error code that you are experiencing is as follows;
F2 73 IMPROPER TONER CARTRIDGE DETECTION (YELLOW)
You need to replace the yellow cartridge with the proper part # Item Number: MX 31NTYA, MX31NTYA.

Good Luck!
Rich Lilja

Jan 08, 2017 | SHARP MX-3100N

2 Answers

Toshiba estudio 455 Error Code E030


E030 indicates jam error on exit...U need to see where the paper stop and why...

Jul 28, 2015 | Toshiba Office Equipment & Supplies

1 Answer

I want to reset this thing


Sorry there is no "reset" for your printing calculator.

May 21, 2015 | Office Equipment & Supplies

1 Answer

I have a donated photocopier for the scout group and it has a code which no-one knows. Speaking to an IT Engineer we should be able to rest to factory settings. We have tried Admin as user name and admin...


Really depends on the model/maker.
Sharp photocopier? try one of those: (note the capital A and S )

Login Name: Administrator
Password: admin
or

Username: admin
Password: Sharp

Oct 02, 2014 | Office Equipment & Supplies

1 Answer

We have forgotten the Administration password for our EStudio 350 & 450. Is there any way of resetting? Thanks Ben


The default password is either 12345 or 123456.
If neither of those work then, turn machine off then power on while pressing the 0 & 8 keys then enter 263, then press Start. It will then display the Admin Password.

Mar 17, 2014 | Toshiba Estudio 200L Copier

2 Answers

We have forgotten the Administration password for our EStudio 350 & 450. Is there any way of resetting? Thanks Ben


restart machine ,then press the 0 & 8 keys,enter 263, then press Start. You should see admin password on the screen.

May 05, 2009 | Toshiba Estudio 200L Copier

Not finding what you are looking for?
Ricoh Aficio 1085 Laser Printer Logo

1,021 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ricoh Office Equipment & Supplies Experts

quennie732

Level 2 Expert

393 Answers

OfficeServiceAjnc
OfficeServiceAjnc

Level 2 Expert

183 Answers

Bernard D'Souza

Level 2 Expert

161 Answers

Are you a Ricoh Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...