My sony ericcson P1i phone is not getting connected with my laptop. Through USB I am able to connect but bluetooth connection is not working. Laptop always tries to load the bluetooth driver but PC suite CD doesn't have this driver. Is there any solution of this problem
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
In order to use your phone Sony Ericson P1i as the modem, you have to install the Sony Ericson PC suit in your laptop using the Sony Ericson CD. It works i used it, you can either start use by Connecting with cabe or Ad-hoc bloetooth pan
I haven't acutally got my P1i and laptop with me so I'll see what I can do from memory. When you put the P1i in file transfer mode it becomes a USB mass storage device and just presents the M2 memory stick in the side of the device as a drive letter in Windows Explorer. However, if in Phone mode it expects the 'mrouter' program to connect the phone to PC Suite using the DCU-60 cable as a serial line. In the system tray you have an mrouter icon which when you right click allows you to select the serial port to connect to the phone. You may need to adjust this recognise the phone. There are also some drivers required for the mrouter interface. Check device manager and make sure there are no yellow question marks in the ports section. You can also use Bluetooth to connect mrouter to the phone, this'll become clear when you look at the port settings! Hope this helps.
Download and install Update Service on your computer to keep the software in your phone up-to-date and ensure optimum performance from your phone.
When the download is complete, an Update Service shortcut will be created on your desktop.
While still connected to the Internet, click the ‘Update Service’ shortcut icon on your desktop
Sony Ericsson window will pop up and downloading will begin. Allow the downloading to run complete to 100%
Another Sony Ericsson window showing different countries’ languages will pop up, select your preferred language.
Sony Ericsson ‘Welcome to Update Service’ window will pop up, showing ‘Exit’ on the left-hand side and ‘Start’ on the right-hand side.
Click the ‘Start’ icon and select ‘Agree’ on the ‘Term of Use’ page that pops up
Select your phone type and click on ‘Continue’
Highlight your specific phone type and select ‘Continue’
Follow the instructions as shown below:
-Make sure your phone is fully charged -Connect the USB cable to a USB port on your computer -Turn off your phone -Remove and reinsert the battery -Press and hold the ‘C’ button down while plugging the USB cable to the computer -Continue to hold the ‘C’ button down until the instruction number ‘7’ on the Update Service comes up (i.e. Instructing you to ‘Release the ‘C’ button)
Allow the update to run to the end
When the system informs you that the latest update has already been installed on your system, click on ‘Continue Anyway’
Click ‘Yes’ to all subsequent questions
Allow the update to fully run to the end
When update is complete, disconnect the USB from the computer and phone
Remove and reinsert the phone battery
Power on your Sony Ericsson P1i phone
NB: since the phone is not powering on, you may not be able to know whether the battery is fully charged. Hence, you will need to use a Sony Ericsson Deskstand. Connect the Battery Charger to its slot on the Deskstand and the USB cable to its slot simultaneously. This enables the battery to charge while the update is also running.