Question about JVC Audio Shelf Systems
Getting error message on display screen when I try to play CD on my shelf system. Tried cleaning with head cleaner disc but did not help...
Any ideas ???
It could be many things but if you put the disc in and you can hear the noise it makes while its scanning the disc then its probably the laser is mis-aligned. If you cannot hear any noise at all and it comes up with error after a while then it could be the entire laser unit needs replacing. Good luck.
Posted on Sep 26, 2008
Tips for a great answer:
Mar 03, 2013 | JVC MXKB30 300W 3-Disc CD Shelf System...
Aug 22, 2011 | JVC MX-K30 CD Shelf System
In some cases this is due to the main spindle getting jammed or there are mechanical errors which as mentioned needs a reset.
Also in some cases when the CD does not play it is possible that the optical head is a suspect. Sometimes it might pick up ordinary audio CD but will not play other formats. This indicates that the optical head is weak and so there is no detection or scanning of the CD . If the optical is working the tracks will be read immediately but with no scanning the laser head can be defective.
Sometimes certain cleaner disks will not be tracked to run for cleaning as it will not be read and so will reject. Hence it is ideal to manually clean the laser head eye using a cleaning swap /cotton bud with gentle pressure on the lens eye.
If there is no result then watch if the CD spins or tries to spin. If so the board seems to work unless a test is taken on the main board but the possibility of a defective optical head can be the suspected fault.
If any of the above seems otherwise we must recheck with possibilities of a malfunction of the main processor board
Jun 25, 2011 | Sony MHC-RG290 Shelf System
Mar 09, 2010 | Harman Kardon JVC UXG50 Micro Stereo...
464 people viewed this question
Usually answered in minutes!