Question about Radio Shack 3 in 1 Universal Remote

1 Answer

Enter key problem

Enter key on radio shack 3 in 1 remote doesn't work on sanyo vcr/dvd

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Need code for sanyo television

Posted on Oct 23, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need coeds for sanyo


Hello
Setup code for Sanyo with One for all URC-3021 is
0154

The One For All 3 Device Universal Remote Control is preprogrammed at

the factory to operate an RCA TV, a Toshiba DVD player, and a Motorola

cable box.To control devices other than the default brands,perform the following
steps; otherwise skip this section:

Turn on a desired device (e.g.,VCR or DVD player) and, if

applicable, insert media (e.g., cassette or disc).

NOTE: Please read steps 2 through 4 completely before proceeding.

Highlight or write down the codes and device you wish to program

before starting step 2.

2. On the remote control,press a device key once (i.e., DVD/VCR,
CBL/SAT,or TV).

NOTE: To program control of a VCR, PVR (or DVR),TV/VCR Combo,

or TV/VCR/DVD Player Combo press DVD/VCR once.After programming

a VCR Combo device, you will be able to control channel selection,

volume, and VCR functions.

NOTE: To program control of a DVD Player,DVD Player/VCR

Combo, or TV/DVD Player Combo, press DVD/VCR once.After programming

a DVD Combo device, you will be able to control channel

selection, volume, and DVD functions.

NOTE: To program control of a Cable Box, Cable Box/PVR (or DVR)

Combo, Satellite Receiver, or a Satellite Receiver/PVR (or DVR)

Combo, press CBL/SAT once.

3. Press and hold SET until the LED (red light) blinks twice,
then release SET.

Use the Manufacturer's Codes to

locate the type of device and brand name and then enter

the first four-digit code for your device. If performed correctly,
the LED will blink twice.

NOTE: If the LED did not blink twice, repeat steps 2 through 4 and enter

the same code again.

5. Aim the remote control at the device and press POWER

once.The device should turn off. If it does not, repeat

steps 2 through 5, trying each code for your brand until

you find one that works. If it still doesn't work, try

Searching For Your Code on next page.

NOTE: If the device does not have a POWER key, press PLAY.

6. Repeat steps 1 through 5 for each device you want to control.

Mar 07, 2011 | One For All URC-3021 Remote Control

1 Answer

I need the code to my sanyo tv


Hello

According ro RCA Codes for sanyo are detailed as

Code 004 for sanyo tv Code 048 for Sanyo TV Code 049 for Sanyo TV Code 073 for Sanyo TV Code 080 for Sanyo TV Code 107 for Sanyo TV Code 162 for Sanyo TV Code 169 for Sanyo TV Code 180 for Sanyo TV Code 196 for Sanyo TV
Just check with these codes according to the proceedings.

1. Manually turn on the TV.

2. Locate the enclosed TV Code List. Find

your brand of TV.

Note: If your brand is not listed, use one

of the Code Search methods to program

this remote control. (See section on

Code Search.)

3. Press and hold the CODE SEARCH key

until the indicator light illuminates.

Then release the CODE SEARCH key.

4. Press and release the TV key. The indicator

light blinks and then remains lit.

5. Use the number keys to enter the first

code listed for your brand. After you

enter a valid three-digit code, the

indicator light turns off.

Note: If you enter an invalid code, the

LED flashes rapidly for two seconds.

Start over at step 3.

6. Aim the remote at your TV and press

the ON•OFF key. If your TV turns off,

you have found the correct code.

7. Enter the code in the box provided on

this page for future reference.

8. If your TV doesn't turn off, repeat steps

3-6 above, entering the next code for
your brand.

Manual Code Search

1. Manually turn on the component you

want the remote to operate.

2. Press and hold the CODE SEARCH key

until the indicator light illuminates.

Then release the CODE SEARCH key.

3. Press and release the component key

that corresponds to the component you

want the remote to operate (TV, VCR,

DVD, DBS•SAT, CABLE, AUDIO). The

indicator light blinks once and then

remains lit.

4. Aim the remote at the component. Press

the ON•OFF key continuously until the

component turns off.

Important: Because there are so many

codes, you may have to press the

ON•OFF key many times-possibly up

to 200 times.

5. When the component turns off, press

the ENTER key to store the code.

6. Use the Code Retrieval section on the

next page to identify the code for your

component for future reference.

OK

Feb 15, 2011 | RCA RCU600M Remote Control

1 Answer

I need help to get a code for my sanyo tv and how to set it up.


Hi
Configuring codes:
1.Turn on a desired device (VCR or DVD player)

2. On the remote control, press a device key once (i.e., DVD/VCR,
CBL/SAT or TV).

NOTE: To program control of a VCR, PVR (or DVR),TV/VCR Combo, or TV/VCR/DVD Player Combo press DVD/VCR once. After programming a VCR Combo device, you will be able to control channel selection,volume, and VCR functions.

To program control of a DVD Player,DVD Player/VCR
Combo, or TV/DVD Player Combo, press DVD/VCR once. After programming a DVD Combo device, you will be able to control channel selection, volume, and DVD functions.

To program control of a Cable Box, Cable Box/PVR (or DVR)
Combo, Satellite Receiver, or a Satellite Receiver/PVR (or DVR)
Combo, press CBL/SAT once.

3. Press and hold SET until the LED (red light) blinks twice,
then release SET.

4. Use the Manufacturer’s Codes to locate the type of device and brand name and then enter the first four-digit code for your device. If performed correctly,
the LED will blink twice.

5. Aim the remote control at the device and press POWER once. The device should turn off. If it does not, repeat steps 2 to 5, trying each code for your brand until you find one that works. If it still doesn’t work, try Searching For Your Code on next page

Auto Code Scan:
1.On the remote control, press TV once.

2. Press and hold SET until the LED (red light) blinks twice, then release SET.

3. Enter 9 - 9 - 1.The LED will blink twice.

4. Aim the remote control at the TV and slowly press POWER button.Stop when the TV turns off

5. To lock in the code, press and release SET.The LED will
blink twice.

6. To search for the codes of your other devices, repeat steps
1 to 5, but substitute the appropriate device key for the device you are searching for.

Code for sanyo tv is 0154
Thank You

Sep 13, 2010 | One For All URC-3021 Remote Control

1 Answer

Radio Shack 5 in 1 remote has no p button


NOTE: To program a TV/DVD, TV/VCR/DVD, or TV/
VCR Combo, use the TV key.
1. Turn on the device (for example, DVD player)
and, if needed, load media (for example, DVD).
2. On the remote, press a device key (that is, VCR/
DVD, CBL/SAT, or TV).
3. Press and hold P until the red LED blinks twice,
then release.
4. Enter the first four-digit code for your device.
The LED blinks once as each digit is entered. If
the code is correct, the LED blinks twice.
NOTE: If the LED does not blink twice, repeat steps 2
to 4 and try entering the code again.
5. Aim the remote at the device and press Power
(or Play, if it does not have a Power key). The
device should turn off. If it does not, repeat
steps 2 to 5, trying each code for your brand
until you find one that works. If you cannot find
a code that works, see “Searching for Your
Code”.
6. Repeat steps 1 to 5 for each device you want to
control. For future reference, write down each
working device code in a safe place.

Sep 12, 2009 | Radio Shack (15-2147) Remote Control

1 Answer

Need tv code to set up dvd/vcr. need remote code to switch tv to vcr?


have a durabrand dvd, need code for radio shack 3 in 1 remote

Apr 21, 2009 | RCA Remote Controls

1 Answer

I need a code for phillips tv and dvd vcr silvania


tv 0062 0204 0184 0208 0205 0206 0207 0004 0189 0183 0199 0200 0081 1149 1154 0288 0456 0003 0008 0068 0075 0086 0087 0141 dvd/vcr 0456 [0458 0227] the codes in the box are as follows the first is for the dvd and the second the vcr

Feb 18, 2009 | Radio Shack 3-in-1 Easy-to-Use Universal...

1 Answer

Sanyo tv code for pansat remote


you can set up any like this
1. turn on what ever you want set up
2. press and hold set up tell light blinks or stays lit
3. push what you are trying to set up t.v. or dvd ect.
4. push power on/off tell it turns off
5. push enter when it turns off
Thank you for useing fixya please rate me

Feb 11, 2009 | Radio Shack (15-2147) Remote Control

4 Answers

Radioshack 3-in-one remote code


the panasonic codefor my radioshack 3-in-one remote is 0250

Feb 27, 2008 | Radio Shack (15-2147) Remote Control

16 Answers

Need codes for a Sanyo TV


I have a 15-2147. The codes from solution 1 didn't work for my remote, so I used the codes listed on Radio Shack's page for the 15-2142. The first code worked. Those codes are: 0154, 1907

Aug 17, 2007 | Radio Shack (15-2147) Remote Control

Not finding what you are looking for?
Radio Shack 3 in 1 Universal Remote Logo

Related Topics:

109 people viewed this question

Ask a Question

Usually answered in minutes!

Top Radio Shack Remote Controls Experts

The Knight
The Knight

Level 3 Expert

68323 Answers

xxxxxx xxx

Level 3 Expert

4706 Answers

martinmarty

Level 2 Expert

62 Answers

Are you a Radio Shack Remote Control Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...