Question about Smeg 24 in. DWI612 Built-in Dishwasher

1 Answer

Smeg Dishwasher DI612C

Hi, My dishwasher doesn't seem to get past the first rinse cycle - after a few minutes it beeps and then stops. When you open the door the detergent drawer hasnt opened and if you close the door again the first cycle starts again and so carries on rinsing.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 750 Answers

Hello Friend,

Welcome to fixya.
I'm Huuum and happy to assist you,

Try this remedy.

When we have an error code this is the remedy.
This can reset the system.
First turn it off.
Cut power to the washer at the breaker and wait a 5 minutes then restart it.

It's like rebooting your computer when its acting strange!
Usually it corrects some error problems if they are not serious.
Or they are sometimes just a glitch.
Write back right away and let me know that it worked and solved the problem .
Bless You
Please remember to enter a rating here when you finish!


How old is the appliance?








Here is an interesting report I just read.

Repair or replace?

When to pull the plug on your old refrigerator

It nearly always makes sense to undertake simple do-it-yourself repairs,
such as replacing a gasket on a refrigerator or a freezer.

Typically, you'll also find a troubleshooting section for more-serious problems
in the owner's manual.

Should you pay for a repair or buy a new model?
The answer depends mostly on the age of your refrigerator,
how much you bought it for,and the cost of the repair.

Follow these guidelines:

When a repair makes sense.

If your refrigerator is under warranty or less than four years old (three years for top-freezers),
paying for a repair makes sense.
Note that refrigerators under warranty might require service from a factory-authorized technician;
readers have found them on a par with independent repairers.

When a repair might be a wise choice.

If your refrigerator is out of warranty and is four to seven years old,
it might make sense to pay for a repair. Customers generally pay $100 to $200 for a repair.
But you might want to buy a new model even at this stage,
given that today's models are quieter and have added features.
Higher energy efficiency is another plus: Energy Star-qualified models made after April 28, 2008,
are 43 percent more efficient than conventional models built before 2001 and 56 percent
more efficient than those built before 1993.

When it pays to replace.

The repair costs more than half the price of a comparable new refrigerator.
Data also shows that it doesn't pay to fix a less-expensive top-freezer refrigerator
six or more years old or a bottom-freezer or side-by-side eight or more years old.

Thanks to better recycling programs, less than 10 percent
of a refrigerator you replace is likely to end up in a landfill.


Thanks for giving me the opportunity to help!
Please do not for get to give a rating before you sign off!
Thank You, HUUUM

Bless You
PLEASE GIVE ME A GOOD RATING HERE AT FIXYA.COM BEFORE YOU SIGN OFF.


Posted on Sep 23, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Bosch dishwasher beeping during cycle


Take the front kick panel off and see if anything under the machine is wet.

Jan 06, 2014 | Bosch Evolution 800 SHE58C02UC 24 in....

1 Answer

How do you reset a smeg DI612C dishwasher?


Just unplug or kill power for about 10 minutes. see what that does but you may have another issue. see if water fills into unit. Also check flod switch for debris

Feb 17, 2013 | Smeg Dishwashers

1 Answer

My indesit idl40 cleans everything, but leaves a film? does not seem to rinse?


Hi, what you are currently experiencing is as a result of dishwasher detergent, combined with mineral deposits from hard water, which in yurn can leave a white film on the inside of the dishwasher.
You have to clean the dishwasher by sprinkling baking soda onto a damp cloth. Scrub the inside of the dishwasher to remove soap scum, grime and mineral deposits.
Pour 2 cups white vinegar into the bottom of your dishwasher. Turn the dishwasher on and run it on a full cycle. Stop the dishwasher halfway through the wash cycle and allow the vinegar and steam to work on the remaining mineral deposits for 20 minutes before resuming the cycle.
Open the dishwasher and dry the interior with clean, dry cloths. Keep the door propped open for 20 to 30 minutes to allow the dishwasher to dry completely.

Jun 26, 2011 | Indesit Dishwashers

2 Answers

Smeg integrated dishwasher continually washing - won't move to drying cycle.


you should check the heating element. if the water is not hot enough, the timer will not advance. crack open the door mid-cycle. let the water stop flying around. then open it all the way up. if you don't get a big ball of steam, you have an indication that your heating element may not be working properly. this is not too hard to check the resistance with a multimeter and then replace, if necessary. good luck

Nov 02, 2009 | Smeg STA4645U 18" Fully Integrated...

1 Answer

SMEG dishwasher - cycle buttons


What is the model of the dishwasher? Open the door and look down the right hand side for a sticker and repost please. As a rule number 3 is a normal wash :D

Mar 23, 2009 | Smeg 18 in. DWI410 Built-in Dishwasher

1 Answer

Smeg Dishwasher ST 663 sometimes won't work


My dish washer stops after i5 minutes, don't know what the problem is, water is going in but just suddenly stops, i changed the hose but still the same. Any help welcome

Feb 22, 2009 | Smeg 24 in. DWD1SSE-1 Built-in Dishwasher

1 Answer

My Smeg dishwasher DWF 64 SSE won't go onto rinse or dry


Easy one first try this to see if it helps

Water pre-heating
Your dishwasher may pre-heat the water. If so, and if the water entering the dishwasher is cool, the heater may take up to half an hour to heat the water.

To avoid the wait, increase the incoming water temperature before turning on the dishwasher. Do that by running the kitchen sink faucet until the water runs hot. Or increase the temperature of the hot water to the entire house at the hot water heater.

Warning! To lessen the risk of scalding, don't set the hot water heater temperature higher than 120 degrees Fahrenheit.

Jan 29, 2008 | Smeg 24 in. DWF612WH Free-standing...

2 Answers

Bauknecht GSX4756 dishwasher


I have this problem frequetly - it's an easy one to fix! Just press the programme button which changes the programme setting you want (on my built-in GSX4756 it's the last button on the right) and keep it pressed in until the beeping stops. Then start it again (will probably be on the rinse programme if it's like mine).

Feb 08, 2007 | Bauknecht 24 in. GSFP3988 Built-in...

Not finding what you are looking for?
Smeg 24 in. DWI612 Built-in Dishwasher Logo

766 people viewed this question

Ask a Question

Usually answered in minutes!

Top Smeg Dishwashers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Starnley Johnwells
Starnley Johnwells

Level 3 Expert

1029 Answers

oysterman

Level 1 Expert

25 Answers

Are you a Smeg Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...