Question about Microsoft Windows Xp Home Edition Sp2 English Mlp Na Only Additional License (n0901086) for PC

1 Answer

Problem with the drive

Hi,,iam pravin from hydbad..when i right click the c drive it shows all application programs like when we open any video file>>open with>>windows media player,winamp,qt etc....i tried to reinstall winxp,,but it installed in F drive..still c drive has the same problem..can u please help me.
thanks
my mail id is :i4upraveen@yahoo.co.in

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,351 Answers

Hi pravin,
One must pay close attention to the display screen when performing a new instillation of windows. Windows will show you the drive partitions. In your case windows will show there are two partitions. One C:\ & a second partition F:\. Perform a 3rd installation of windows. When you get to the screen where you can see both partitions (C: & F:) have windows delete the F: partition. Than have windows format the C: partition. Once C: has been formatted have windows install its self onto C:\
Install your driver software for your board. Than update windows through windows update service.
If you wish to back up your personal data to a CD/DVD writer, suggest you do this before formatting the system. Suggested folders to back-up.
C:\Documents and Settings\ User name\Application Data\Microsoft\Address Book
C:\Documents and Settings\ User name\Desktop
C:\Documents and Settings\ User name\Favorites
C:\Documents and Settings\ User name\Local Settings\Identities
C:\Documents and Settings\ User name\My Documents
Data from any program you may have installed.

Once windows has been updated & you install anti-virus software you can copy & past each folder over the new folder in windows.
How to install windows XP. http://support.microsoft.com/kb/316941

Good luck pravin!
Mike

Posted on Sep 24, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How to Add Programs in Windows Startup?


Programs or shortcuts placed in the Startup folder will run whenever Windows starts.
  1. Click the Start button , click All Programs, right-click the Startup folder, and then click Open.
  2. Open the location that contains the item you want to create a shortcut to.
  3. Right-click the item, and then click Create Shortcut

Oct 19, 2016 | Operating Systems

1 Answer

Lost google as icon how do i get it back on


C:>program files>Googlr>Chrome>application

In English: Click on the start button, the click on my computer. Open up the c drive then go into program files. in there, there should be a folder called Google, in that there is a folder called chrome, in there open up application and there you should find chrome.exe.

Right click in and choose "create shortcut" That shortcut you can place where ever and can be used to open up google chrome

Nov 27, 2013 | Microsoft Windows XP Professional With...

1 Answer

How can fix microsoft visual c++ runtime library


Hello,

Which program is it?

Hello,
This is what I did.
1. Turn On PC as normal
2. Wait for prompt error to show up
3. When it appears, Run Task Manager (here you can see the task running the Error Prompt)
4. Right Click on the task and Choose > Go To Process (will take you to processes Tab)
5. See the highlighted Process, Right Click and Choose Open File Location
6. Windows Explorer will appear and you can see the Application Folder (name of application)
In my case, a 'browser toolbar application' was trying to auto initiate itself
7. Open Uninstall Programs > Search for Application Name > Uninstall (NOTE: PLEASE DO NOT UINSTALL IF THE PROGRAM IS A CORE FILE like Windows related program)..
8. Restart PC.....its gone :)


Another alternative:

Do a system restore. Click start > program > accessories > system tools > system restore.

Restore it to a known good date when your computer was fine.


I hope this helps.

Carlo

Nov 28, 2012 | Operating Systems

2 Answers

How to install video drivers actuly iam able to open control panel


hi

first of all you have to know *********** board model then download video drivers and install


if any doubt mail me to tsnp@ymail.com

Apr 18, 2011 | Microsoft Windows XP Professional

1 Answer

If i try to download something,like a video,it says connect media to save destination


You do not have a default program for your video viewing or that particular video requires a specific program to be used. Ensure that your computer has a video player such as Windows Media Player if you are using a Windows OS or that you have Quick Time if you are using a Mac OS. If these programs are already installed, then you may want to ensure that they are set to be the default program for that particular video.
Download the video, then right click the video and click the option that says "Properties". When the box appears, click open with and select either Quick Time or Windows Media Player. To avoid doing this for every video, follow the instructions below:
WINDOWS OPERATION SYSTEM
  • Open Windows Explorer by right-clicking the Start button, and then click Explore.
  • Click a folder that contains a file of the type that you want Windows to open in a program that you select.
  • Right-click the file and, depending on the programs installed on your computer, complete one of the following steps:
    • Click Open With to choose the program that you want.
    • Point to Open With, and then click Choose Program to choose the program that you want.
  • The Open With dialog box is displayed. Use one of the following methods to select the program that you want to use for this file type:
    • In the Programs list, click the program that you want to use.
    • Click Browse, locate and then click the program that you want to use, and then click Open.
    • Click Look for the appropriate program on the Web to browse the Internet for the program that you want to use.
  • Click to select the Always use the selected program to open this kind of file check box if it is not selected.
  • Click OK.

  • MAC OS
    1. 1quick-change-files-default-application-1.1-120x120.jpg Select the File to Make the Default Application Change

      In an open Finder window, select the file you wish to make the default application change to.

    2. 2quick-change-files-default-application-1.2-120x120.jpg The Contextual Menu for the File

      Right-click your mouse or use a "Ctrl-Click" with the keyboard to bring up the contextual menu for the file.

    3. 3quick-change-files-default-application-1.3-120x120.jpg Clicking the "Option" Key Changes the Menu Item to "Always Open WIth."

      Press the "option" key on your keyboard and you will notice that the "Open With" menu item in the contextual menu will change to "Always Open With." Select the "Always Open With" option in the contextual menu.

    4. 4quick-change-files-default-application-1.4-120x120.jpg Select the Application from the "Always Open With" Menu

      Select the Application from the "Always Open With" menu to make your changes to the file, and the newly selected application will become

    Nov 29, 2010 | Operating Systems

    2 Answers

    The application failed to initialize properly (0xc000007b). Click Ok to terminate the application." error message in windows xp sp2 for some application.kindly help me how to solve this problem...


    your disk drive might not be getting continuos power
    control panel admistrive tools,computer management,device manager scroll down cd dvd rom drives you might see a yellow question mark ? right click you can you can update driver,roll back driver,or select properties general troubleshoot, select driver click to reinstall drivers click update driver or uninstall then reinstall if this does not fix the problem it might be a registry problem
    Close all open programs

    Click on Start, Run, and type regedit and press Enter
    Click on the plus signs (+) next to the following folders

    HKEY_LOCAL_MACHINE

    SYSTEM

    CurrentControlSet

    Control

    Class

    {4D36E965-E325-11CE-BFC1-08002BE10318}

    This folder is the DVD/CD-ROM Drive Class Description in the registry. Look for any of the following names in the right hand column.

    Upper Filters

    Lower Filters

    Upper Filters.bak

    Lower Filters.bak

    If any of the above keys shown in step 4 are listed, right-click on them and choose Delete

    After deleting the keys, close the registry editor
    Reboot your computer

    Open My Computer and check to see if your CD or DVD drives have returned. You may also want to open Device Manager and verify that the yellow exclamation and error code on the CD or DVD drive is gone.



    hope this helps

    Nov 25, 2010 | Microsoft Windows XP Professional With...

    1 Answer

    I had to wipe and recover my toshiba satellite L350d resulting in now being unable to use my webcam. i was thinking that the drivers werent on my recovery disks. i dont know anyhelp would be much...


    You should have created an "Applications and Drivers" disk along with with recovery disks. After your computer is started and you are at your desktop, put that disk in your CD or DVD drive and allow it to come up. Then browse to the webcam driver and double click on it and follow the prompts.

    If the DVD drive doesn't automatically show the disk go into "my Computer" or "Computer", right click on the DVD drive and select "open" or "explore".

    If you didn't make an "Applications and Drivers" disk, from start go into "All Programs" and look under "Toshiba" or "Toshiba Utilities" until you find the "Create Recovery Disk" wizard, then click on that and look for "Applications and Drivers", then follow it out.

    Sep 10, 2010 | Operating Systems

    1 Answer

    Error : em8tqm.cmd


    may be it cause virus praveen

    go to start button and click run
    and type cmd

    then type

    cd\ and press enter
    then type
    attrib -r space -h space -s space autorun.inf then enter

    ex: 1. attrib -r -h -s autorun.inf enter
    2. del autorun,inf enter


    after that go to d: and press enter
    1. attrib -r -h -s autorun.inf enter
    2. del autorun,inf enter


    Apr 08, 2009 | Microsoft Windows XP Professional for PC

    1 Answer

    Win32


    Hello,
    Hopefully this will get your system back up and running well.  First download from malwarebytes.org their free anti-malware program. Then follow the steps below.

    • Make sure you are connected to the Internet.
    • Double-click on mbam-setup.exe to install the application.
    • When the installation begins, follow the prompts and do not make any changes to default settings.
    • When installation has finished, make sure you leave both of these checked:
      • Update Malwarebytes' Anti-Malware
      • Launch Malwarebytes' Anti-Malware
    • Then click Finish.
    • MBAM will automatically start and you will be asked to update the program before performing a scan. If an update is found, the program will automatically update itself. Press the OK button to close that box and continue. 
    • On the Scanner tab:
      • Make sure the "Perform Quick Scan" option is selected.
      • Then click on the Scan button.
    • If asked to select the drives to scan, leave all the drives selected and click on the Start Scan button.
    • The scan will begin and "Scan in progress" will show at the top. It may take some time to complete so please be patient.
    • When the scan is finished, a message box will say "The scan completed successfully. Click 'Show Results' to display all objects found".
    • Click OK to close the message box and continue with the removal process.
    • Back at the main Scanner screen, click on the Show Results button to see a list of any malware that was found.
    • Make sure that everything is checked, and click Remove Selected.
    • When removal is completed, a log report will open in Notepad.
    • The log is automatically saved and can be viewed by clicking the Logs tab in MBAM.
    • Copy and paste the contents of that report in your next reply and exit MBAM.
    Note: If MBAM encounters a file that is difficult to remove, you may be asked to reboot your computer so it can proceed with the disinfection process. Regardless if prompted to restart the computer or not, please do so immediately. Failure to reboot normally(not into safe mode) will prevent MBAM from removing all the malware. MBAM may make changes to your registry as part of its disinfection routine. If you're using other security programs that detect registry changes, they may alert you after scanning with MBAM. Please permit the program to allow the changes.


    I hope that this helps you out, and that you are able to restore your system back to running condition.
    Ken

    Jan 06, 2009 | Microsoft Windows XP Professional With...

    1 Answer

    Couldn't open the hard Drive folders....


    hi sir,

    i think you have an autorun.inf file residing at your local drives. this probably infected by a virus.

    go to control panel >folder option> click View> choose "Show Hidden Files and Folders" and uncheck Hide Protected Operating System Files, this will show hidden autorun.inf file. In your explorer, right click your local disk and click explore, this will show all your files and folders of your drive, navigate autorun.inf file, if found delete it.
    note: it has an associated file called vbsscript file...if found also delete it..do the same with the other drives. empty recycle bin and restart.

    Winsor

    Sep 02, 2008 | Microsoft Windows Server Standard 2003 for...

    Not finding what you are looking for?
    Microsoft Windows Xp Home Edition Sp2 English Mlp Na Only Additional License (n0901086) for PC Logo

    95 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Microsoft Operating Systems Experts

    Brian Sullivan
    Brian Sullivan

    Level 3 Expert

    27725 Answers

    Joseph Coppeto
    Joseph Coppeto

    Level 3 Expert

    165 Answers

    M Beutner
    M Beutner

    Level 2 Expert

    68 Answers

    Are you a Microsoft Operating System Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...