HOW DO I GET OUT OF SUSPEND MODE I MIGHT NEED MORE RAM ALSO WINDODWS XP HOME 798 RAM

have to select suspend mode s1 or s3 in BIOS power management to check the support mode, also check with hibernate, also need to free space in hard drive system partition for hibernating

http://www.bing.com/videos/search?q=computer+SHUT+OFF+SUSPEND+MODE+COMPLETELY&FORM=HDRSC3

computer SHUT OFF SUSPEND MODE COMPLETELY Bing Videos

If you have placed yourself on suspend mode. Only you can suspend your profile if your profile is approved and in good standing. Log in to the site. Go to `Members Home` then to `Your Profile and Information Block` and click on `Suspend`. You can re-activate your profile at any time by clicking on the `Re-Activate` button where the `Suspend` button used to be.
If your account has been removed in error, please contact Customer Service at [email protected]. Please provide the username and email address used at the time of signup.

Hmmm, sleep/suspend mode is only supposed to happen when it doesn't sense any movement from the mouse, it also shouldn't suspend if you are in full-screen either. So if you are playing a game that shouldn't happen at all... as a test you should put the "turn off the display" to "never" and see if it still happens.
I have this happen when watching Netflix, if I don't move the mouse my TV will go into suspend mode, even though I am in full screen... I think my issue however is related to the fact that I am using HDMI to connect to my TV from my computer... I have not solved this issue yet!

The blinking should be in a pattern.

Power Green On (S0) Computer on
Power Green 1 blink every 2 seconds (S1) Suspend Mode
Power Green 1 blink every 2 seconds (S3) Suspend to RAM
Power Green Off (S4) Suspend to Disk (if applicable)
Power Clear Off (S5) Computer off
Power Red 1 blink followed by 2-second
pause - Repeat
Power Supply failure
Power Red* 2 blinks 1 second apart CPU thermal shutdown
Power Red* 3 blinks 1 second apart CPU not installed
Power Red* 4 blinks 1 second apart Power supply overload (crow bar)
Power Red* 5 blinks 1 second apart No memory
Power Red* 6 blinks 1 second apart No graphics
Power Red* 7 blinks 1 second apart System board failure (detected prior to video)
Power Red* 8 blinks 1 second apart Invalid ROM
Hard Drive Green Blinking Hard drive activity
*Blinking

def not too much ram. did the problem start immediately after swapping memory if so double check to make sure it is seated properly.
now by doesn't want to start, you hit the power button and what happens (video would be great as mine does this, but there are some tricks that seem to help. you can rule out suspend mode by unplugging removing the battery and hitting the power button

To find out how much RAM is currently installed on the Windows XP Home computer, right click on My Computer (either from the Start menu or desktop) and choose Properties. In the General tab it will tell you how much RAM is currently installed. To find out how much RAM you can install and what speed it has to be, go to Crucial.com and run their free memory scanner.

Your pc isn't recovering properly from Suspend mode.

If it's an XP laptop I would recommend changing the Power Management options to Hibernate than Suspend. If it's a newer Laptop, than Hibernate won't take long to recover. I had to do this with my new Netbook.

You can also force the system into safe mode. You click on startup and type in msconfig. Click the general tab and select diags and the system will reboot to safe mode. Change it back to normal to get your system out of safe mode.

Please rate my response.

Windodws 3.1/95/98/ME/NT/2000/XP all have "native" support for floppy-drives -- *NO* driver is needed.