Question about Kodak Easyshare G600 (1633379) Dock / Cradle

1 Answer

Easyshare G600 Dock

My daughter dropped the unit and the feed roller popped out at one end. I managed to relocate the roller and it turns freely. There does not appear to be any other damage but the paper will not feed with the message add paper. The rollers pick the paper up and pulls it in at least part of the way but that's as far as it gets.

Posted by on

  • Roberta Smith
    Roberta Smith May 11, 2010

    a gear is likely off inside.... shake it gently (no don't have your daughter do it) and see if you hear anything rattling around in it.





    Robert

×

1 Answer

Robert,
I first tried shaking my daughter but that didn't work. The unit itself doesn't rattle at all and is otherwise undamaged. I will ask my local camera/ electronics repair shop to look at it. They repaired a video camera at a reasonable price when everyone else said it was uneconomic.
If too expensive, I will try taking it apart. I am wary of this because sometimes you take a screw out and something drops down inside but OK as a last resort.
Thank you for your help.

Ron

Posted on Sep 23, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The photo paper does not feed into printer. I


Get hold of the photocard and try, with your fingers, to curve the end that goes into the printer first so that it doesnt resist as the machine tries to pick it. Just curve/bend it little upwards, not downwards. Usually this kind of problem is temporal and happens especially when the card is a bit too hard for the machine.

Dec 09, 2009 | Office Equipment & Supplies

1 Answer

My Kodak G600 printer dock will not recharge my Ni-MH batteries.


Hi there,

you're right. You only can charge the Orginal KAA2HR batterypack of kodak in the cameras.

;-)

Aug 26, 2009 | Kodak Easyshare G600 (1633379) Dock /...

2 Answers

My G600 easy share G600 will not pick up the paper to print my pictures


Try to take off the paper tray of the printer dock
Get a damp lint free cloth and clean the rollers on the printer dock
try to print again

Aug 10, 2009 | Kodak Easyshare Printer G600 Thermo...

1 Answer

Paper will not feed into the EasyShare printer Dock series 3.


The paper sensor in the printer might be disturbed please check that one.

Jul 02, 2009 | Kodak EasyShare Printer Dock Series 3

1 Answer

Kodak #G600 printer dock/roller won't pull paper through


I read this solution to a problem someone else was having which was similar to my problem. I wiped off the roller with a damp cloth, made sure it was dry and that's all it took to allow the roller to be able to start to pull the paper through. - thanks for the help!

May 27, 2009 | Kodak Easyshare Printer G600 Thermo...

1 Answer

My G600 printer dock does not charge my rechargeable batteries


are you using a D26 adapater?


can you verify what type of batteries are installed in the camera?

The only battery that the dock will charge in the CX7530 camera is the
KODAK Ni-MH Rechargeable Digital Camera Battery KAA2HR
8156572

May 03, 2009 | Kodak Easyshare G600 (1633379) Dock /...

2 Answers

Will not pick up paper


Take a wet cloth and clean the front grabbing roller by rotating roller on the wet cloth. You may have to do several times and after printer has not been used for a while.

Dec 10, 2008 | Kodak Easyshare Printer G600 Thermo...

1 Answer

Printer fails to feed paper for printing


try gently rubbing the take up roller with a damp cloth - let dry and try with no more than fifteen or twenty sheets of paper in the feed tray

Oct 29, 2008 | Kodak Easyshare Printer G600 Thermo...

Not finding what you are looking for?
Kodak Easyshare G600 (1633379) Dock / Cradle Logo

Related Topics:

104 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kodak Cameras Experts

kakima

Level 3 Expert

102366 Answers

Tony

Level 3 Expert

2598 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1667 Answers

Are you a Kodak Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...