Question about Pentax Optio E40 Digital Camera

1 Answer

I can't load software

Cannot load software into Windows XP, Install Wizard says Driver not found. List for maually installing software does not include Pentax. CanI download driver from somewhere?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    One Above All:

    The expert with highest point at the last day of the past 12 weeks.

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

  • Pentax Master
  • 96,642 Answers

You don't need a driver.


The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.


Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use any photo cataloging program such as Picasa.

Posted on Aug 25, 2012

6 Suggested Answers

  • 1 Answer

SOURCE: Connecting OPtio S4i to PC

After formatting my PC to upgrade it I've been unable to install the USB driver software to save pictures from my Tentax OPtio S4i to my PC.

My computer isn't recognising my camera when I plug it into the USB port.

When I've tried to install the Driver using the disk I got with my camera, at the stage where it asks me to MODIFY REPAIR or REMOVE, the software I get the following showing up on display boxes:

Posted on Jul 12, 2008

Siestamagic
  • 6 Answers

SOURCE: Need a driver for my pentax optio s45

Windows XP uses its own built-in drivers for digital cameras like your Optio 50. There is not driver for you to download.

With XP you should be able to simply open up the "My Computer" icon on your desktop.
Under "My Computer" you should see a "Removable Disk".
Double Click on it, and then your should see "DCIM", double click on that and then you will see "100PENTX".
Double click on "100PENTX" and you will see all your pictures.
You can then copy those pictures to anywhere on your computer.

If this does not work for you, you can always use a card reader to download your pictures. Many later model computers have built-in SD card readers. If your computer does not have a slot for an SD card you can purchase a card reader, usually for under $20, at most major computer/electronics equipment retailers.

Posted on Sep 18, 2008

science gugu
  • 10 Answers

SOURCE: need driver software download for

try this website
www.pentax.com/models/

Posted on Oct 04, 2008

Nova_1
  • 196 Answers

SOURCE: pentax optio s 60 driver

http://www.soft32.com/download_185396.html for Windows 98/Me/NT/2000/XP

Posted on Oct 14, 2008

  • 1 Answer

SOURCE: need a driver for vista/ pentax optio 60

I need webcam driver for vista.. pentax optio 60 my e-mail dan_polukhin@mail.ru

Posted on Feb 12, 2009

rajdeepdutta
  • 2517 Answers

SOURCE: Upgraded to Windows 7 & it no longer

HI there there try to download the windows 7 camera driver from pentax website. It will start work then. Another way is remove the memory card & put in in a card reader then you can also transfer all photos from card to computer For further help ask me . Thanks.

Posted on Mar 23, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Webcam driver


Click start control panel-view devices and printers.
You should see your webcam from there.
If you have trouble with your webcam:
Click start control panel-administrative tools-computer management-device manager-scroll down image
devices you could see a yellow question mark ?

right click to reinstall drivers or update driver xp.
Click start right click on
computer select properties device manager scroll to image devices expand right
click to update driver in W7
http://download.cnet.com/2000-20_4.html
on the home page you should
see a search tab just type in what you are looking for IE:
webcam name webcam driver you might have to try a few times to get it right
software if you don\'t have the driver you will need to download one here rather doing a driver hunt, which can take hours.
http://download.cnet.com/slimdrivers-free/3000-18513_4-75279940.html
Windows XP/Vista/7/8
It might take some time being a freeware driver solution.
note: It will find all of your outdated drivers.
This is a free driver solutions.
This will automatically search for and find the correct driver.
You will have to update every driver individually once you update. You might be
asked whether you want to restart or make a system restore. Point click no to both of these, then continue updating each driver free, then restart once all of the drivers have been updated.
Some webcams and programs require additional software, although that should be installed with the webcam if things are right. But it doesn\'t hurt to check if your Java, Flash and Quicktime software are installed and up to date.
But certainly check your DirectX software, since all video applications, including
webcams, use DirectX for video processing. Try downloading the latest DirectX version and install it (Windows XP: DirectX 9.0c Windows Vista: DirectX 10).
http://windows.microsoft.com/en-US/windows7/Which-version-of-DirectX-is-on-your-computer
If you still have no webcam installed, Run the "Add a device"application, accessed by clicking on the "Start" button, opening the "Control Panel," and then double-clicking on "Add a device."
The "Add a device" window will open and Windows will search for devices connected to your system but not installed.
Click on the webcam name that shows in the search box and
then click "Next."
Choose whether you want Windows to search for the webcam
device driver using Windows Update over the Internet, or if you\'d prefer to
have the device manager search for the driver using a disc supplied by your
laptop manufacturer. Most drivers can be found on the system recovery disc
included with your laptop, if you choose to add the driver from the provided disc.
Place a check in the box next to your choice and then click "Next" to continue.
Wait while Windows searches from the driver using Windows
Update, if this was your choice.
An active Internet connection is required for Windows to
successfully do this. Allow the computer to install the driver and then reboot
the system for the webcam to become recognized by the system.
Otherwise, you can use the system recovery disc or a driver
downloaded directly from your laptop manufacturer to install the driver without
using the Windows Update search feature.
Open the CD/DVD-ROM drive and insert the system recovery
disc, or place the driver downloaded from the manufacturer in an easily
accessed file directory on your PC, such as on the desktop, or in your "My
Documents" folder.
Choose the option "Install the software automatically
(Recommended)" in the "Add a device" application, and press
"Next" to begin searching for your webcam driver.
The hardware wizard will search the system recovery disc and
install the driver automatically. Press "Finish" to close the wizard
and then reboot the computer to allow recognition of the webcam.
Choose the option "Install the software manually"
in order to browse to the driver location where you saved the driver and
install it from there.
Use the opened file manager and locate the driver.
Click the "Next" button to install the
driver, then reboot the computer to add webcam functionality.

May 21, 2013 | Kobian Mercury 3.1 Deluxe Classic Digital...

1 Answer

Trying to install webcam


Firstly install the software found on the supplied cd that came with the camera and plug the camera when required by the installation wizard .If you don't have the CD try checking on the manufacturer's web page for a driver.You can also plug the camera in and leave windows to search for the driver.Better is to install via dedicated driver as above

Mar 31, 2011 | Digital Cameras

2 Answers

Canon Ixus 960 IS Driver Problem


Hello :

This link contains the right driver for your CANON DIGITAL IXUS 960 IS .

PLEASE DON'T FORGET TO RATE !

GOOD LUCK .

Apr 08, 2010 | Canon IXUS 960 IS Digital Camera

1 Answer

Vista os loads software but wont reconize camera


There might be compatibility issue. Try running the compatibility wizard in vista. You can start the wizard by typing compatibility wizard in windows Help and Support; it will display a link. Select your powershot software in the list of programs and choose XP in the compatibility mode.

Jul 01, 2008 | Canon PowerShot A520 Digital Camera

3 Answers

Telefunken TDC-5000 digital camera driver


I have the original install disk for Telefunken TDC-3000.
It has the drivers for Windows 98/2000/Me/XP.
Compressed, it is about 11 M. Nero disk Image about 18 M.
The CD itself is 15.2 M.
The compressed version is self extracting.
If you are able to accept an Email of that size, I can send it to you.

May 11, 2008 | Digital Cameras

1 Answer

Computer doesn't recognize camera


Remove previous all installation/ file if any. Insert the Driver CD in the CD ROM again a wizard interface would be active, from that wizard complete the installation by clicking Next - Next. Do not plug the camera before fresh installation complete. If wizard ask to plug your camera, then plug it.

Jan 21, 2008 | Canon PowerShot SD850 IS Digital Camera

5 Answers

Cant download photos?


My daughter just received one of these camera's for her 6th birthday and is extremely excited. I am running Windows XP and was getting the "No pictures on camera" error. I tried downloading the drivers for this but that did not work. Here is what I did to get the camera working:

1) Connect the camera with the provided USB cable.
2) Download the latest driver from the Digital Blue web site: http://digiblue.com/customer-service/downloads/index.html, select the "The Disney Pix Micro Drivers for WIN ME, 2000, XP"
3) Install this driver, this will not enable the camera to work yet.
4) After this driver has installed, go to Control Panel
5) Select System
6) Select the Hardware tab
7) Select Device Manager
8) Find the device in the list (mine said "USB Digital Still Camera"), will probably have the yellow exclamation mark on it saying that it is not working.
9) Double click the device
10) Select "Reinstall Driver" from the General tab
11) When asked if Windows can connect to Windows Update to search for software, select "Yes, this time only" and click Next.
12) Choose "Install the software automatically" and click Next.
13) You should get a message saying the driver for the "DB CIF Cam" has not passed the Windows Logo testing, select "Continue Anyway".
14) Click Finish.
15) The first time I did this, I needed to take a picture while the camera was connected to the PC.

After doing this I am able to download the pictures and everything works great. I hope this helps.

Dec 27, 2007 | Disney Pix Micro Digital Camera

1 Answer

Sanyo VPC-s500 i cant get it to install drivers or find them so i can upload pictures to my computer


The simple solution to this problem is that no drivers are required. This camera is treated as a removable (secondary) drive just as if it was a USB thumb drive or external hard drive.
First go to settings on the camera by rotating the dial to the wrench icon.
Turn the camera on and select Set-Up 2
Select USB
Select PC
Your camera is now ready to use with your computer.
Now plug your camera into your computer and check under My Computer for the drive to show. You can now copy files over to your computer from the camera.
If the drive isn't showing you'll have to go into Disk Management to view it
Disk Management is under Administrartive Tools located in your Control Panel (or Start Menu if you have it set to show there)
Select Administrative Tools
Computer Management
On the left hand side click Disk Management (or on the right click Storage then Disk Management)
Finally you can now Right Click the cameras drive and chose Open

Sep 20, 2007 | Panasonic Lumix DMC-FZ7 Digital Camera

1 Answer

Installing digital camera drivers from Nikon View 5 or 6 CD on Windows OS


This document assumes that your computer did not recognize your digital camera after you have installed Nikon View version 5 or version 6 (5/6) using "Easy Install" and then restarted your computer. Nikon View 5/6 compatibility: Windows 98 SE Windows ME Windows 2000 Windows XP Home Edition/Professional Note: Log on as Computer Administrator when installing drivers on Windows XP Home Edition/Professional or as Administrator when installing drivers on Windows 2000 Professional. Cameras that are not supported by Nikon View 5/6 Nikon View 5/6 does not support direct connection of COOLPIX 950, 910, 900, 800 or 700 digital cameras however it will support a Compact Flash card reader which contains images taken with these cameras. Before installation - Before installing Nikon device drivers, make sure the camera is disconnected from the computer. If the Device Wizard launches when you connect a camera, click Cancel to exit the Wizard. - You have turned off any virus-checking software that may be running. - You have exited all other applications. Procedure for driver installation First DISCONNECT THE CAMERA FROM THE COMPUTER and follow the instructions below. Insert the Nikon View CD into the CD-ROM drive, the Select Language dialog box appears. Select a language Select the language of your choice from the pull-down menu. After you select a language, click Next to display the Install Center window. Custom Install Step 1: Select the software to be installed. Select the programs you want to install from the list in the Custom Install tab. Step 2: Install the driver Choose the camera driver you wish to install and click Install. If you have chosen more than one program, the programs are installed in the order of display. - PTP Drivers Select this check box to install PTP drivers. This check box is only displayed if you are using Windows XP. - COOLPIX Camera Drivers (all models except 990 and 880) Select this check box to install the driver for COOLPIX series cameras (excluding 990/880). This check box only appears if you are using Windows 98 Second Edition. - Drivers for COOLPIX 990 and 880 Select this check box to install the drivers for the COOLPIX 990/880 - Drivers for D1 series cameras Select this check box to install the drivers for the D1/D1X/D1H cameras. Install PTP Driver (Windows XP only) Check that the camera is disconnected If you selected the PTP Driver, the installation of the driver will start. The Setup dialog box below is displayed, asking you to confirm that a camera is not connected to your computer. Make sure a camera is not connected, and click OK to begin installation. Windows 98 SE If you are using Windows 98 SE, drivers for all COOLPIX cameras (all models except 990 and 880) will be installed if selected. The dialog box shown right will be displayed. Click OK to continue. When you install the device driver, the dialog box shown below may be displaye

Aug 30, 2005 | Nikon Coolpix 3200 Digital Camera

1 Answer

Installing digital camera drivers from Nikon View 5 or 6 CD on Windows OS


This document assumes that your computer did not recognize your digital camera after you have installed Nikon View version 5 or version 6 (5/6) using "Easy Install" and then restarted your computer. Nikon View 5/6 compatibility: Windows 98 SE Windows ME Windows 2000 Windows XP Home Edition/Professional Note: Log on as Computer Administrator when installing drivers on Windows XP Home Edition/Professional or as Administrator when installing drivers on Windows 2000 Professional. Cameras that are not supported by Nikon View 5/6 Nikon View 5/6 does not support direct connection of COOLPIX 950, 910, 900, 800 or 700 digital cameras however it will support a Compact Flash card reader which contains images taken with these cameras. Before installation - Before installing Nikon device drivers, make sure the camera is disconnected from the computer. If the Device Wizard launches when you connect a camera, click Cancel to exit the Wizard. - You have turned off any virus-checking software that may be running. - You have exited all other applications. Procedure for driver installation First DISCONNECT THE CAMERA FROM THE COMPUTER and follow the instructions below. Insert the Nikon View CD into the CD-ROM drive, the Select Language dialog box appears. Select a language Select the language of your choice from the pull-down menu. After you select a language, click Next to display the Install Center window. Custom Install Step 1: Select the software to be installed. Select the programs you want to install from the list in the Custom Install tab. Step 2: Install the driver Choose the camera driver you wish to install and click Install. If you have chosen more than one program, the programs are installed in the order of display. - PTP Drivers Select this check box to install PTP drivers. This check box is only displayed if you are using Windows XP. - COOLPIX Camera Drivers (all models except 990 and 880) Select this check box to install the driver for COOLPIX series cameras (excluding 990/880). This check box only appears if you are using Windows 98 Second Edition. - Drivers for COOLPIX 990 and 880 Select this check box to install the drivers for the COOLPIX 990/880 - Drivers for D1 series cameras Select this check box to install the drivers for the D1/D1X/D1H cameras. Install PTP Driver (Windows XP only) Check that the camera is disconnected If you selected the PTP Driver, the installation of the driver will start. The Setup dialog box below is displayed, asking you to confirm that a camera is not connected to your computer. Make sure a camera is not connected, and click OK to begin installation. Windows 98 SE If you are using Windows 98 SE, drivers for all COOLPIX cameras (all models except 990 and 880) will be installed if selected. The dialog box shown right will be displayed. Click OK to continue. When you install the device driver, the dialog box shown below may be displaye

Aug 29, 2005 | Nikon Coolpix 5700 Digital Camera

Not finding what you are looking for?
Pentax Optio E40 Digital Camera Logo

Related Topics:

46 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pentax Digital Cameras Experts

kakima

Level 3 Expert

96627 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

halotheracer
halotheracer

Level 2 Expert

68 Answers

Are you a Pentax Digital Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...