Question about Intel D915GAG Socket 775 Motherboard - 915G Chipset - Onboard Audio, Video, Lan - MicroATX

2 Answers

D915GEV Intel Motherboard - Will not boot after plugging in printer USB cable

Last night I decided to plug in a printer I had previously (a year ago) installed on my computer but has just not plugged it in since i moved. Upon plugging it in, my computer froze. It would not respond to anything so I hard to do a hard reboot. It will not boot at all. The MoBo is not responding. When I turn it on, all fans will run but nothing else.

Any Ideas? I am thinking of clearing the CMos tonight to see if that fixes the problem but I am lost at the significance of the USB connection and what caused the problem.

Posted by on

  • Anonymous Oct 02, 2008

    not boot

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Useless...tips...contact ur computer engineer.......

Posted on Sep 26, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 158 Answers

There should be problem in your motherboard, contact computer engineer

Posted on Sep 26, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can i connect sata internal hard disk 500gb with d915gev motherboard


I dont think that is possible seeing that, the motherboard only has IDE cables, If it has a SATA port go for it

Jul 10, 2014 | Intel D915GEV Motherboard

1 Answer

Hi...my OS is Windows 8 and I can't install my motherboard Intel D915GEV graphics card...please help me... ... ...


Here is the official Win 8 Compatibility site:http://www.microsoft.com/en-us/windows/compatibility/en-US/CompatCenter/Home
Suggestion: Always test OS and software on VMware and keep checking Intel for updated drivers. Good luck.

Aug 24, 2012 | Intel D915GEV Motherboard

1 Answer

D915GEV mobo won't start


I would reseat your processor. Make sure it's in there properly. Then make sure your processor fan is installed correctly and is plugged in.

Reply back with your results.

Dec 24, 2011 | Motherboards

1 Answer

How to Bypass or Remove a BIOS Password , Intel D915GEV Motherboard


Remove the BIOS battery for 15mins then insert it back. Boot up the computer and go to the BIOS configuration and set the date and time etc.

Feb 25, 2011 | Intel D915GEV Motherboard

1 Answer

My mother board is D915GEV when I connect inno3d Geforce 9400GL 1 GB video card to PCI-E slot and start my computer then computer does not boot neither it turn on the monitor. But in the same system if I...


It is possible that the 9400GL is not compatible with your motherboard. Might be possible that the max video memory is 512MB.
Maybe a BIOS update can solve this.

Sep 21, 2010 | Intel D915GEV Motherboard

4 Answers

Will the D915GEV support window7


Yes: Windows 7 can be used with this board.



If you want to run Windows 7 on your PC, here's what it takes:
  • 1 gigahertz (GHz) or faster 32-bit (x86) or 64-bit (x64) processor
  • 1 gigabyte (GB) RAM (32-bit) or 2 GB RAM (64-bit)
  • 16 GB available hard disk space (32-bit) or 20 GB (64-bit)
  • DirectX 9 graphics device with WDDM 1.0 or higher driver
Here's the specs on the D915GEV
(See PDF Manual)
Click here:
D915GEV Technical Product Specification [PDF]

The Intel 915G chipset consists of the following devices:
• Intel 82915G Graphics Memory Controller Hub (MCH) with Direct Media Interface (DMI) interconnect
• Intel 82801FB I/O Controller Hub (ICH6) with DMI interconnect
• Firmware Hub (FWH)
The MCH is a centralized controller for the system bus, the memory bus, the PCI Express bus, and the DMI interconnect. The ICH6 is a centralized controller for the board’s I/O paths. The FWH
provides the nonvolatile storage of the BIOS.

Supported Memory Configurations.
Up to : • 4 GB maximum total system memory.

Processor:
The board is designed to support Intel Pentium 4 processors in an LGA775 processor socket with an 800 or 533 MHz system bus.

Note: All processors available for this board are in excess of the 1 gigahertz (GHz) minimum requirement for Windows 7. (see here) http://www.intel.com/support/motherboards/desktop/d915gev/sb/CS-026957.htm

If you found this information helpful, please give me a big thumbs up when you rate my answer. Thanks.

Feb 08, 2010 | Intel D915GEV Motherboard

3 Answers

Where do i download intel d915gev drivers.I lost my CD


Get connected to the internet to download the software
driver for your motherboard.

Nov 10, 2009 | Intel D915GEV Motherboard

1 Answer

How do I attach the front USB, speaker and mic of the case to MB?


Follow that arrows on the pictures. Plug the USB Front Panel Cable.
Good luck!

fe1a9e9.jpg

Aug 06, 2009 | Intel Motherboard

2 Answers

Hi, pc doesn't load bios


Hey just remove the hard disk and and removable drive and then try.
And check that your hard disk data cable and cd/dvd driver data cable is in good position or not. Many times the problem is happens because of cable. So you just try a new cable.

Mar 09, 2009 | Intel D915GEV Motherboard

Not finding what you are looking for?
Intel D915GAG Socket 775 Motherboard - 915G Chipset - Onboard Audio, Video, Lan - MicroATX Logo

Related Topics:

355 people viewed this question

Ask a Question

Usually answered in minutes!

Top Intel Motherboards Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Tony

Level 3 Expert

2598 Answers

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Are you an Intel Motherboard Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...