Question about Dell 5110cn Laser Printer

2 Answers

Supply status How do you check the supply status?

Posted by on

  • attgrayson Sep 29, 2008

    I know that, but what about the other parts of the printer?

  • hank1170 Mar 05, 2009

    Is there any way to check imaginf drum, fuser, & trasnfer roller supply status on the printer iteslf?

×

2 Answers

On this particular printer, the only supplies that are shown with a meter are the toners. The following is taken directly from the users manual.

Determining the Status of Supplies If your printer is connected to the network, the Dell Printer Configuration Web Tool can provide instant feedback on remaining toner levels. Type the printer IP address in your Web browser to view this information. To use the E-Mail Alert Setup feature that notifies you when the printer requires new supplies, type your name or the name of the key operator in the e-mail list box.
On the operator panel, you can also confirm the following:

  • Any supply or maintenance items that require attention replacing (However, the printer can only display information about one item at a time.)

  • Remains of each toner cartridges
you can download a copy of the printer manual if you have misplaced yours by following the link below.

http://support.dell.com/support/edocs/systems/5110cn/en/index.htm

Though the other items, such as the fuser, imaging drum, transfer roller, density sensor may need to be replaced at times, the machine should alert you when it is close to EOL (end of life) for that part.

I hope this was helpful.

Posted on Sep 30, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

  • Expert
  • 188 Answers

The operator panel on the 5110 ALWAYS displays the supply status of the toners. Each of the 4 colors, represented by a colored tear drop, black, cyan, magenta, and yellow are represented by a bar graph directly above the tear drop.

When all of the toners are full, all 4 bar graphs are displayed evenly. As toner is depleated, the bar graphs will decrease in size. When they are almost empty they will start to display an error code on the display to alert you.

Posted on Sep 28, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have HP Color LaserJet CP1515n Printer wanted to configure on domain base network . Just need to know the IP address of this printer????


Status TheStatusfolder contains links to the following main pages.
  • Device Status. This page indicates product conditions such as a jam or an empty tray. After you correct a problem, clickRefresh statusto update the product status.
  • Supplies Status. View details such as the estimated percent of toner remaining in the print cartridge and the number of pages that have been printed with the current print cartridges. This page also has links for ordering supplies and for finding recycling information.
  • Device Configuration. View a detailed description of the current product configuration, including the amount of memory installed and whether optional trays are installed.
  • Network Summary. View a detailed description of the current network configuration, including the IP address and network status.
  • Print Info Pages. Print the Configuration page and other information pages, such as the Supplies status page.

Dec 13, 2014 | HP Printers & Copiers

1 Answer

I want to check ink level


You can check the supplies status by using the control panel, printing a supplies status page,
or viewing HP ToolboxFX. Hewlett-Packard recommends that you place an order for a replacement print
cartridge when Low message for a print cartridge first appears.

Nov 03, 2012 | HEWLETT-PACKARD LaserJet M1522nf...

1 Answer

Only black white


Thanks for questioning, pl don't post shot cut questions,your inputs are more valuable for us to give straight away trouble shooting..>Check all cartridges are fully loaded?>Before any body attempted for trouble shoot?>Are you checked for supply status?> Are you performed color calibration?**** Do color calibration (go to menu,system set up,quality,color calibration,calibrate now)Take supply status print out(go to menu,scroll to reports,scroll to supply status, enter in to for print)check all colors are printed are not? If printer take print out from system or print demo page from printer menu.. check print quality...and color calibration..****Remove supplies.. observe while closing the door right side in the supply bank supply contacts engaging or not.(while closing the front door the 'bios voltage contact leavers' engages with the cartridge contacts for passing the voltage in to the cartridge for charging,see the attached snap shot)if these are broken,no contacts or not properly driving by the mechanism, results no print.. check for these contacts...*** alignment disturbed, its major issue users cannot perform this activity..submit in service center for this major issue.


If yes.. Perform color calibration... 1_9_2012_3_23_58_am.jpg

Jan 08, 2012 | HP Color LaserJet 2600n Printer

1 Answer

My HP Laserjet 2840 is showing "replace supplies" in the display. There are 5 box/cylendar's that appear in the display and the last one has a solid black box box in it. I was able to go thru...


Thank you for contacting FixYa with your printer inquiry.
The low ink could definitely be the problem thats prompting the error. To begin troubleshooting print the supply status page and confirm the state of the various supplies. Follow the steps below:
Supplies Status page The Supplies Status page lists the remaining life of the HP print cartridges and the HP imaging drums. It also lists the estimated pages remaining, number of pages printed, and other supplies information. You can print a Supplies Status page from the device or the HP Toolbox. To print from the device, complete the following steps. 1. On the control panel menu, press MENU. 2. Use the button to select Reports, and then press ENTER 3. Use the button to select Supplies Status, and then press ENTER. Note Supplies information is also available through the HP Toolbox.
This page illustrates conditions of consumables for Toner Cartridges, Image Drums, Image Transfer Kits, and Fuser Kits. It also provides ordering information and methods for disposing of or recycling used supplies.
Supplies information is also available through the HP Toolbox.
Areas of Supply Status Page: 1. Print-cartridge area. This area contains a section for each of the print cartridges and provides information about HP print cartridges. This information includes the part number for each print cartridge, whether each print cartridge is low, and the life remaining for each print cartridge expressed as a percentage, as a graphic, and as the estimated number of pages remaining. This information might not be provided for non- HP supplies. In some cases, if a non-HP supply is installed, an alert message appears instead. 2. Imaging-drum area. This area contains the same information for the imaging drum that the print-cartridge area provides for the print cartridges. 3. Warranty Note. This section contains information about how the device warranty is affected when you use non-HP supplies. It also requests that you call the HP fraud hotline if a supply that is being detected as a non-HP supply was sold to you as a genuine HP supply. (See HP fraud hotline.) 4. Ordering Information. This section contains basic information about how to order new HP supplies. See Checking status and ordering supplies. 5. Recycling Information. This section contains a link to the website that you can visit for information about recycling. See Replacing and recycling supplies.
The product Support Manual is available from the below link:
http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c00341096/c00341096.pdf
If you have further questions just add comment to this link and we will gladly provide additional information and support.
Kind regards,
TF

Jun 08, 2011 | HP LaserJet 2840 Printer

1 Answer

I am trying to print a word document. When I go to "file" and "print" nothing happens. The status light next to the printer screen is red. How do I get it to print and get the...


Hi
Try restarting the printer by turning the power off and turning it back on. Also check the connection between the printer and the computer. If this fails the power supply may be at fault so to get this checked go to a pro because handling the power supply yourself can be hazardous
Goodluck

Mar 11, 2011 | Brother MFC-8840D All-In-One Laser Printer

2 Answers

How do i check ink level on cp1515n


Print a Supplies status page from the control panel
NOTE: Before you can print the Supplies status page from the control panel, you must install the product software and connect the product to the computer.
  1. On the product control panel, press OK to open the menus.
  2. Press the Arrow buttons (c01393185.gif ) to select Reports , and then press OK .
  3. Press the Arrow buttons (c01393185.gif ) to select Supplies status , and then press OK . The Supplies status page prints.
  4. Press X to exit the menus.

Nov 30, 2010 | HP LaserJet CP1515n Printer

2 Answers

SUPPLY STATUS


you cann't
just open tha cartridge and mesure how much toner has left inside
after removing the fill cup




utube.png You-Tube video "iMiTopIVMxM" placeholder (do not delete) utube.png


if i help you pls vote

May 05, 2010 | HP LaserJet 1020 Printer

1 Answer

How do I check current ink levels in cartridges in my HP Laser Jet 3500


I have an hp 3500 printer myself...simpley print out a supplies status page.
on the control panel go to information than scroll thru that until you see supply status page.. i'm not near my machine now.. but take a little time going thru the menus you'll see supplies status page..
i'm using my hp 3500 as a parts machine..so I don't need it.
would you like to purchase the old fuser/transfer belt toner cartridge for realy cheap...i live in PA if you are close..

Jan 06, 2010 | HP Color LaserJet 3500 Printer

1 Answer

Replaced black toner..now printer won't print any


In this case, actually it is not the Black toner that got depleted. Here the message being displayed indicate that one of the color Toner supply need to be replaced as it got depleted and currently the printer is printing in Black and white using the Black toner cartridge.

in this case, to troubleshoot these issues please try performing the following and check for the results.

* 1. Check for the level of the toner cartridges:

a) Check from the HP Toolbox application. Here are the steps to be performed from your PC:

* Access the Toolbox software.
* Select the Status tab.
* Select the Device status option.

Here you can check for the supplies status in terms of the % remaining for each toner cartridges.

b) By checking the supplies status from the printer control panel display.

On the printer display when printer is in Ready mode the supplies status can be checked from the supplies level indicator. Each toner cartridge and the Imaging drum level will be indicated by a bar which varies according to the level of the supplies present.

c) Print the supplies status page from the printer.

* On the printer control panel menu, press Menu .
* Use the (Right Arrow) button to select Reports, and then press Enter .
* Use the (Right Arrow) button to select Supplies Status, and then press Enter .

If any of the color toner cartridges and the Imaging drum have a low supply level replace them with genuine HP print cartridges.

The part numbers of the consumables are as follows:

* Black print cartridge - Q3960A
* Cyan print cartridge - Q3971A
* Magenta print cartridge - Q3973A
* Yellow print cartridge - Q3972A
* Imaging Drum - Q3964A

Sep 23, 2009 | HP LaserJet 2840 Printer

1 Answer

How do I check the ink status in my HP 1600?


usually you can check in the printer properties dialog box....'Right click' on your printer, select "properties", then there should be a button to click like "maintenance" or something similar, then maybe "supplies status" or similar

Mar 11, 2009 | HP PSC 1600 InkJet Printer

Not finding what you are looking for?
Dell 5110cn Laser Printer Logo

286 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dell Printers & Copiers Experts

Prashant  Sharma
Prashant Sharma

Level 3 Expert

1127 Answers

Rick Johnson
Rick Johnson

Level 2 Expert

84 Answers

sunmaid

Level 1 Expert

3 Answers

Are you a Dell Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...