Question about Nokia 9300 Smartphone

1 Answer

Blank LCD both inside and out

My 9300 just went blank as i was speaking on the phone. Now it won't turn on it just stays blank

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 29 Answers

If u can still make A CALL or RECEIVE a call from ur 9300, that means ur 9300 'flexible cable' (the cable thAt links your upper part of ur 9300 with the lower part of ur 9300) is broken, u have to replace it with the new one. now u have to find a technician, and if he told u that other thing is broken, don't let him fix it, search for any technician who tell u the truth.

I'm a technician as well, but I'm from Indonesia, can't help u there ^^ gud luck with ur phone, remember, try make call first, if it can't make call or receive call after u power on. then, ur phone might be broken (the other component on the machine), but if u only have blank display, but the other function can be done, like receiving call, then it's certainly, flex cable.

Posted on Oct 05, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Blank screen after putting in a new LCD


did the ribbon cable stay connected during reassembly? these are difficult to work on.

Mar 12, 2014 | Samsung Exhibit 2 Smartphone

1 Answer

My nokia 9300's screen went blank.please give me necessary support on how i can remove it without depending on the communicator screen. infact the outer screen is ok but the communicator screen is what...


First of all, your question is not clear enough for me,but let me conclude what you are saying.

Loosing the internal display depends on LCD and Flex connector that connects the upper and the lower panel. But most problem that i encounter about this mobile is the replacement of Flex connector due to some cut areas along its parts. Outer display is separate from internal display so possible to see the outer display.

This mobile need to fix by an experience techinician because fixing this problem is more complicated to work with, more likely on dismantle,replacing and disassembling the parts than any small type of mobile.I may advice you to bring it to an authorize service center to make this problem.

Regarding your personal data that stack inside your phone, You need a tool to recover all of your important data.Download this link to copy all files coming from the phone and all the way to your computer.

NOKIA PC SUITE DOWNLOAD


Follow this procedure :

1. dowload the link above and locate the download file were save.
2. run the application and install the program,just follow the instruction and wait till the installation is done.
3. open the application and connect the phone thru the computer using data cable or usb cable.
4. wait until the mobile is recognize by computer.

Now you can see all data stored from phone to computer,you can download and transfer them to another phone if applicable.

Please correct me if this is what you try to say.

Best Regards.

Jul 04, 2011 | Nokia 9300 Handheld

1 Answer

Screen gone blank, won't display nokia n96. the phone functions, but the screen remains black, and won't display anything.


There is one of the following problems with your phone.
  • LCD of your phone disconnected from the connector inside the casing.
  • LCD had been damaged and need to replace by a new LCD.

Nov 05, 2009 | Nokia N96 Smartphone

1 Answer

The screen just went blank. It was lit up, but no display. So I turned it off and on a couple of times, to no avail. So I tried to take the battery out and put it back in and now it won't even turn on


well, try recharging the battery and restarting your phone.
the fact that it won;t turn on leads me to believe it's battery.
the blackberry is a really good phone, is it possible the screen could have been damaged in any way. If the LCD is broken without being cracked that could be the issue.
the LCD is plugged into the motherboard and if the phone was dropped could have come unplugged or the LCD could be damaged.
The phone could actually be on and the lcd is blank.
Hard to say about any of it.
You could go to a blackberry provider store and ask them to borrow a battery out of one of their phones and check it.

Jun 17, 2009 | AT&T Blackberry Curve 8300 Smartphone

1 Answer

My t-mobile wing screen is blank


If you are still able to recieve calls but the display is blank means its not a phone problem but rather a display problem. The LCD display panel is damaged and needs to be replaced. If the phone is still under warranty then rush to the nearest service center and they should fix it for free. Otherwise the panel costs around 100-150$. You can replace it on your own though..

Dec 02, 2008 | Samsung Blackjack SGH-I607 Smartphone

2 Answers

Won't stay on/ blank screen


2 things-

If the screen is blank white then the cable is probably loose: Follow this guide but just reseat the lcd cable

How to Fix T-mobile Dash LCD Screen

For the software issue:

The Windows Mobile installation may be corrupted.
The only way to fix that problem is by re-installing the windows software on the phone.
You can get the software for the T-mobile dash at the following link: http://www.t-mobile.com/wmupgrade/

Nov 12, 2008 | T-Mobile Dash Smartphone

1 Answer

Please i need your help


flex cable is falty it the part connects the lcd to th keypad th two parts

Oct 16, 2008 | Nokia 9300 Handheld

2 Answers

LCD screen went blank


to fix this problem is usualy simple, 90% of the time if you have a blank screen it is because the screen has come unplugged, open the casing of the phone and just plug the screen back into the circuit borad this should solve ur problem, please note this does not work if you have full white screen. hope this helps people with this problem.

Jul 28, 2008 | Nokia 3230

1 Answer

Internal Display Frequently Blank


Replace the display stri. it will work.



Kerala Tourism

Jan 10, 2008 | Nokia 9300 Smartphone

1 Answer

Blank screen


it seems like the cable from the lcd to the phone mabye loose or you NEED A NEW LCD,,,
i HAVE WINDOWS MOBILE 6 ON THE MDA AND I HAVE A LOT OF PROBLEMS

Nov 01, 2007 | T-Mobile MDA

Not finding what you are looking for?
Nokia 9300 Smartphone Logo

Related Topics:

97 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nokia PDAs Experts

ka4iup
ka4iup

Level 3 Expert

3942 Answers

kakima

Level 3 Expert

96346 Answers

 Mikey
Mikey

Level 3 Expert

4701 Answers

Are you a Nokia PDA Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...