Question about Kenmore Oasis HE 27082 Top Load Washer

2 Answers

Kenmore Oasis HE 27082 Front Load Washer

Good morning, my Kenmore Washer will not release the fabric softner, no error codes come up, can you help?

Posted by on

  • cyoung27 Sep 22, 2008

    Where is the solenoid located?

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,952 Answers

The fabric softner goes in during the rinse cycle. If you have a downey ball just drop it into the washer with the clothes in the beginging of the cycle. If no ball then wait till the rinse cycle and pour in the measured cup directly onto the clothes and close the washer.

Posted on Sep 22, 2008

  • mohammed marika thambi
    mohammed marika thambi Sep 22, 2008

    If you use fabric softener you need to do a vinegar wash to strip the sludge rom the softener

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 360 Answers

Ohm the release solenoid. could be shorted or open. check for voltage to the circuit

Posted on Sep 22, 2008

  • Jimmy
    Jimmy Sep 22, 2008

    it should be just behind the softner door. let me know what happens jimmy

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I am getting an F 51 error code


http://www.fixya.com/support/t3240355-f_51_code_kenmore_elite_oasis_washer



man try a good search
like

https://www.google.co.uk/search?q=Kenmore+Oasis+HE+27082&ie=utf-8&oe=utf-8&gws_rd=cr&ei=M8f4VKCbL8z1Uv2fhKgI#q=Oasis+HE+27082+error+code+51


Mar 05, 2015 | Kenmore Oasis HE 27082 Top Load Washer

1 Answer

F1 error code front load Kenmore washer


Check the air dome transducer hose first,
(the clear plastic tube that goes from the control board to the right side of the outer tube connector) for problems and clogs. If that is fine then you will have to replace MCU (control board).

Aug 28, 2013 | Kenmore Oasis HE 27082 Top Load Washer

1 Answer

Fabric Softener Dispenser Overflowing


Sounds like you have a blockage check/ clean remove dispenser to do

Apr 06, 2010 | Kenmore Oasis HE 27082 Top Load Washer

1 Answer

Kenmore washer has a error code of hc


You need to switch over your hot and cold water lines. 'HC' means that your hot and cold are hooked up to the wrong inlets.

Mar 30, 2009 | Kenmore Oasis HE 27082 Top Load Washer

1 Answer

F code


Machine off press and hold for a count of 5 the spin button and release for 5 until 88 appears. If a F error comes up write back for a solution

Oct 13, 2008 | Kenmore Oasis HE 27082 Top Load Washer

2 Answers

Kenmore Oasis HE 27062600 Fault code 50


Any solution? I have the same F50 error code.

Apr 29, 2008 | Kenmore Oasis HE 27082 Top Load Washer

2 Answers

Kenmore Oasis F54 code


F54 = Motor Control Overcurrent
Does the basket turn freely? If not, determine cause of friction.
There is a detailed repair manual inside the machine. If you open the top of the machine with a screw driver in the front you will find the manual on the inside of the front panel. Good luck

Dec 09, 2007 | Kenmore Oasis HE 27082 Top Load Washer

1 Answer

Kenmore Oasis HE 27092


kevin, F50 is the code for when the motor rotor positon sensor does not detect any rotation. If the basket turns freely a bunch of test will have to be made to find out the problem. On the inside of the front panel there is a tech sheet that will guide you through the troubleshooting...Catriver

Sep 12, 2007 | Kenmore Oasis HE 27082 Top Load Washer

Not finding what you are looking for?
Kenmore Oasis HE 27082 Top Load Washer Logo

Related Topics:

197 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Fordexpert

Level 3 Expert

5363 Answers

Archaeology
Archaeology

Level 3 Expert

662 Answers

2mikecurtis

Level 2 Expert

65 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...