I suddenly saw an error message, F-35-3, on the LCD of this copier/printer machine. Help!! I think I read somewhere that it's either the fuse or a thermistor that would need to be replaced - error indicator, F-35-3. Is this correct? If so, how do I fix this? If this is not correct, what could be wrong with this machine? I found a thermistor to cost ~$30, and it would be more cost effective to replace it myself.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
F 35-1 pertains to Abnormal Low fixing temp TH1. Try to clean the thermistor and reset the code by entering mode 25, software switch 3-1, make it zero. If the problem occur again, try to replace thermistor. Make sure that AC supply from mains is okay.
When C-35**,C-38** or C-39**(fusing temperature related
abnormality) occurs, be sure to repair defective parts before
setting DIPSW3-1 to 0. Setting DIPSW3-1 to 0 with defective
parts not repaired results in a fire.
first step power off your machine press 25 from keypad while keeping them press on your m\c . then see on display panel and press software switches scroll switch no 3 and press bit no 1 and press off . just off and on machine