Question about Neff Washing Machines

Open Question

Error code E04 on my NEF v536ox ogb - Neff Washing Machines

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is error code E04 on hoover washer


E:04" on the washing machine. Check to ensure there is no water in the tub. This is a common error often associated with too many suds blocking the pump. It is caused by using the wrong laundry detergent which is not designed for high-efficiency washers. You can adjust your use of detergent and reset the machine to eliminate the error code.

Read more : http://www.ehow.com/how_10038363_reset-bosch-washing-machine-error-e04.html How to Reset Bosch Washing Machine With Error 04 eHow

Jun 21, 2015 | Hoover Washing Machines

1 Answer

What does the error code E04 mean on Whirlpool AWU610 Washer-Dryer


Any error code starting with "E" followed by numbers indicates a code meant for a service technician. Call your Duet dryer retailer or Whirlpool directly to set up a servicing appointment.

Read more : http://www.ehow.com/list_7528706_whirlpool-duet-dryer-error-codes.html

Mar 16, 2015 | Whirlpool Washing Machines

1 Answer

What does fault code e04 mean


There are many brands of washers and the error codes are different.
What kind of washer do you have. Brand name and model number.
Open door and look around the frame for the model number.
Here is a link to e04 on a Bosch washer.
Repairing 04 Error on Bosch Washer

Sep 10, 2014 | Washing Machines

1 Answer

What does the E04 error code mean?


E04 means that you are not draining quick enough, if you are using HE detergant then your drain line is probably clogged. There is a round access panel on the lower right corner of your washer. If you stick a small screwdriver through the tiny little hole on this panel and twist the panel off you will see the drain pump catch. You can twist this cap off by hand and remove all the debris inside. WATCH OUT a lot of water will be coming through.

Dec 07, 2012 | Bosch Nexxt 500 WFMC3301 Front Load Washer

1 Answer

E04 Error


E04 is a time out on the heating phase, to confirm this run a cold cycle, if the machine completes the cycle but sticks on any program above 40 degrees, best bet it's a faulty heating element.

Nov 27, 2011 | Bosch Washing Machines

1 Answer

I have a siemens front loading washing mashing, the door will not unlock and there is an error code E 04 is this something I can fix or do I need to call for service?


This machine is most likely a the E04 error, which means the pump is blocked.

if in fact its a bosch you will find this should fix the error.

Bosch E04 Solution:
  1. Get some towels and if possible a wet/dry vac. If the machine drained, it won't be too bad. If your machine is stuck full of water, I can't say! I'd guess you could get wet.
  2. Locate the round door on the front of the machine (about 6" in diameter, lower right corner)
  3. Find a drill bit or small screwdriver that fits in the hole in the round door.
  4. Insert the bit into the hole in the door. It will push in a tab, it doesn't take much force. Rotate the hole (clockwise) to 6'oclock and it should come free.
  5. Once the door is out of the way you'll be greeted by a 3-4" plastic cap with wings so you can unscrew it by hand. There is a small collector lip at the bottom of the cap, that is where I held my wet/dry vac to catch the water. Unscrew slowly so you don't get flooded. Take your time and keep unscrewing it until it is free.
  6. Pull out the trap that you just unscrewed and you'll most likely see the item that caused the E04 error code. There is an side of the trap that is marked that it needs to be installed facing downward, so watch for that when you put it back in.
  7. Read these directions upside down and backwards to put it all back together.
  8. Run a load and watch for leaks. You could leave the door off until you are sure you screwed the cap in tight enough.

Dec 31, 2010 | Washing Machines

2 Answers

I have an electrolux w3180 error code e04 comes upon starting a program. In the manual it states Temperature sensing device indicates temperature below -5°C (continuity fault). Is this just loose...


Hello, The "e04" error code means is an indication of a water temperature sensor error below 04'c
what it means is that there is over flow of water in the sensor reader around the wire and the sensor

what you have to do to fix up the problem is to unscrew (open)the washer then cleanup the water around and also the dirt sensor and wire and allow it to relax for some time after clean up

please the clean up DOES NOT NEED water or any form of liquid to do this just apply dry cloth for the cleaning.
Thanks

Jun 11, 2010 | Washing Machines

1 Answer

EO4 POPS UP ON MY bOSH FRONT LOADER WFMC33O1UC


I had error code E06 come up on my Bosch Washing machine and since cleaning out the pipe as suggested, turning the machine back on to run a wash, error code E04 has now popped up...please advise asap what's the best thing for me to do...many thanks :)

Dec 05, 2008 | Washing Machines

1 Answer

Error code e04 on hoover washing machine


called hoover and they replaced the washing machine

Jul 27, 2008 | Washing Machines

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

85 people viewed this question

Ask a Question

Usually answered in minutes!

Top Neff Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1456 Answers

sonic boom...
sonic boom...

Level 3 Expert

1557 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Neff Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...