Question about Maxent MX-50X3 50 in. HD-Ready Plasma Television

1 Answer

I have the same problem, but now the TV is completely unresponsive, and does not work at all. (Before I just had to unplug/plug it back in)

I have the same problem, but now the TV is completely unresponsive, and does not work at all. (Before I just had to unplug/plug it back in)

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have maxent plasma52 inch sound ok but picture blinking

Posted on Jan 04, 2009

2 Suggested Answers

  • 10 Answers

SOURCE: Same problem. No picture and TV is unresponsive

I had the same problem and I found a shorted 100uF 100V electrolytic capacitor on the lower logic level scan board. This board was located underneath the I/O tuner section on the tv. This shorted capacitor was keeping the 70V "VA" power supply output from starting. There are 8 caps total on the 4 logic level scan boards in the tv so you should replace them all.

Posted on Jul 11, 2010

  • 104 Answers

SOURCE: I had to unplug my

There should be a surge release button on the surge protector to bring the protector back to normal (should be red in color) Some surge protection devices have this option so just check if your s has it. If that is not the case than I think that you might have blown a fuse in your TV.Might just have to open it up and change the fuse within with the same ratings, but please be careful because do have high voltages so get an experienced technician to do this for you.
Good Luck.

G.

Posted on Jun 29, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My tv broke


Sounds like tuner fault. Tuning drift. Contact any service technician to replace it. http://electronicshelponline.blogspot.com/

Jul 21, 2015 | Flat Panel Televisions

2 Answers

Plasma TV-power light does not come on


have you tried a completely different wall socket altogther/

Mar 03, 2008 | Samsung HP-S5053 Television

1 Answer

Blank screen with sound, unresponsive panel buttons


Nothing is forever or for free, suggest you donate it or recycle it.

Dec 03, 2012 | Niko OTP-3211W 32 in. LCD Television

1 Answer

Element FLX-2610 Red standby LED is lit, but will not turn on


The set will need to be serviced, but sounds like you have a problem with either the power supply or main board.

Oct 23, 2012 | Element Electronics FLX-2610 26 in. LCD...

2 Answers

Technika 32-270 LCD TV won't stop scanning


Need help stopping scan on tv, won't turn on and no remote will activate anything on the monitor. Help flat screen tv.sanyo keeps on percenting

Dec 31, 2011 | Flat Panel Televisions

2 Answers

I had to unplug my tv today (actually the TV is plugged into a surge protector, so I unplugged the surge protector.) when I plugged the surge protector back in the TV wouldn't go on (acts as if its...


There should be a surge release button on the surge protector to bring the protector back to normal (should be red in color) Some surge protection devices have this option so just check if your s has it. If that is not the case than I think that you might have blown a fuse in your TV.Might just have to open it up and change the fuse within with the same ratings, but please be careful because do have high voltages so get an experienced technician to do this for you.
Good Luck.

G.

Jun 29, 2011 | Flat Panel Televisions

1 Answer

After using the television with the VGA cord from my computer monitor to the television it became unresponsive. Both remotes did not work and neither did the controls on the television itself. The tv was...


I had the same issue, the only solution I have found was to unplug both the VGA cable and the audio before turning it on, then plug them both in after you switch the input to VGA. Kind of a pain, but it works. Am still looking for a better solution though.

Feb 12, 2011 | Polaroid FLM-323B Television

1 Answer

Magnavox 42 LCD 42mf438b/f7 turns on/off by itself sometimes screen goes blank tv unresponsive to remote


I have exactly the same problem with a Magnavox LCD 42", very similar model 42MF437B/37. I don't have a solution. If you unplug the TV and plug it back it starts working, sometimes for hours, sometimes for less than 5 minutes, before it turns off again. Does anyone have any real solution?

Jul 08, 2009 | SNK Magnavox 42MF438B/27 42 in. LCD TV

2 Answers

Vizio GV47L screen went black and is now unresponsive


Could be the power supply gone bad.
No easy solution I'm afraid.

May 20, 2009 | LG 47LC7DF 47 in. LCD HDTV

Not finding what you are looking for?
Maxent MX-50X3 50 in. HD-Ready Plasma Television Logo

Related Topics:

279 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maxent Flat Panel Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

The Knight
The Knight

Level 3 Expert

68246 Answers

Cindy Wells

Level 3 Expert

4756 Answers

Are you a Maxent Flat Panel Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...