I have been using my hp2460 printer for about 6 months and suddenly got a problem.. lights are blinking fast, 3 blinks per second(approx).. when i plug the power, no movement or reactions take place.even the hardware detection on my pc(USB) port. please help cause im suffering a lot,, thank you
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
If only the power green light is blinking, you could try a printer reset that may correct the problem.
1. With the printer on, disconnect the plug from the electrical outlet.
2. Wait at least 3 minutes
3. Plug back into the outlet.
Friend, the problem are the following 1. be sure it has enough ink to print 2. the ink was not properly misplaced 3. there was something stuck on the printer roller 4. check the connection properly or if not reinstall the software driver and if stil not. you need to reset the factory memory through CSS utility.com
The blinking power light can indicate multiple problems. So Please refer to the User manual in this link for the reasons of blinking power light. Try the solutions provided and see if you can fix it out.