Question about Singer Quantum XL-1000 Computerized Sewing Machine

3 Answers

The LCD Touch-Screen not working

I have a Quantum XL-1000, When I press a desired pattern on the screen
what I press want appear something else. Example: when I press Straight
stitch some other pattern appear.
Maet53

Posted by on

  • Anonymous Mar 25, 2014

    None of the stitching patterns work. They all stich in a straight line.

×

3 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 78 Answers

Hold dowm the start and reverse button then turn on the machine the sceen should show the Sinnger sceen. touch the sceen and it should freeze and then show a little square box touch the box only after you touch the box four time at differant points on the sceen touch the stright stiche w3ith button this saves it and you should be ready to go

Posted on Jan 22, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,071 Answers

Try to reset the unit by unpluging for 2 - 3 hours to erase the last memory stock on it,then replug again.If nothing happens bring it to your dealer.

Hope it may help you;

Regards,
VOTIT

Posted on Sep 22, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,447 Answers

Hi-

Chances are you need to reset the settings. check the guides as well for the correct setup.

Hope this helps

Posted on Sep 22, 2008

  • Edgar Allan Pagayona
    Edgar Allan Pagayona Sep 22, 2008

    Check this site as well this might help, click HERE

    and check this site as well for FAQ's on singer products

    http://www.singerco.com/support/faqs.htm...




×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

LCD SCREEN OUT OF LINE, LETTERS IN ROW COME UP WHEN I SELECT FROM ROW 1


you may have to have the computer part checked to see if there is something wrong with it

Apr 11, 2016 | Singer Quantum XL-1000 Computerized Sewing...

1 Answer

The touch screen on my singer quantum xl-1000 lights up but no icons are showing. What should I do?


I have instructions for recalibrating the screen on an XL-6000, which is similar enough that it should work; however, give it a try at your own risk. I would point out, though, that at this point you probably have nothing to lose.

While the machine is turned off, you hold down the scissors button, reverse button, and the green/red light button all at the same time. While pressing these buttons, you turn your machine on and can let go of the buttons. You take the pointy end of your lint brush and use it as a stylus to touch a little red dot on the screen (that also has that pen looking thing that I had messed with and that caused my trouble), the dot will move to another position and you will touch it again. It moves again two more times, and each time you will touch it with the pointy end of the brush. Then you will touch the treasure chest box on the screen to save what you did. You will then turn off the machine and turn it back on, and then things work again!

Oct 19, 2014 | Singer Quantum XL-1000 Computerized Sewing...

1 Answer

Singer quantum xl 1000 sewing machine


. sounds like a PC board issue. Can be $$$.
Good luck!

Oct 18, 2013 | Sewing Machines

1 Answer

Singer Quantum XL 1000 LCD Screen not working properly and needs to be realigned. When I try to select an "A" to stitch a name, "B" is the letter that is chosen. I need to realign,...


Hi jlbostwick,

Here's what you can do to recalibrate the touchscreen of your machine:

Enter service mode.

1.Press the start/stop switch and hold it while you power the machine on.

2. Then, press the reverse switch, hold it and press the LCD.

3. Release the reverse switch AFTER you touch the LCD.

Hope this helps.

Thank you for using FixYa.

Sep 21, 2011 | Singer Quantum XL-1000 Computerized Sewing...

1 Answer

Cannot navagait at all on screen


Need touch screen replaced. Take to singer service center. Listing at singerco,com.

Jan 08, 2010 | Singer Quantum XL-1000 Computerized Sewing...

4 Answers

How do you recalibrate the touch screen on the Quantum XL-1000?


Enter service mode....

Press the start/stop switch and hold it while you power the machine on.
THEN, press the reverse switch, hold it and press the lcd. Release the reverse switch AFTER you touch the LCD.

Nov 15, 2009 | Singer Quantum XL-1000 Computerized Sewing...

1 Answer

Singer XL1000 touch screen lights but does not


Need to have touch screen replaced, parts availalbe thru linssewvac@hotmail.com or another authorized service center

Jul 19, 2009 | Singer Quantum XL-1000 Computerized Sewing...

1 Answer

The touch screen no longer responds to touch


More than likely the lcd board/screen needs to be replaced. Find a dealer who services Singer machines and they can order the part and install it.

Jul 07, 2009 | Singer Quantum XL-1000 Computerized Sewing...

Not finding what you are looking for?
Singer Quantum XL-1000 Computerized Sewing Machine Logo

324 people viewed this question

Ask a Question

Usually answered in minutes!

Top Singer Sewing Machines Experts

Bargain Box
Bargain Box

Level 3 Expert

1388 Answers

Cindy Wells

Level 3 Expert

4755 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Are you a Singer Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...