Question about Office Equipment & Supplies

Open Question

Konika Bizhub 7222- Stop printing extra page

I changed some networking and now every time I print it spits out a cover sheet with the job# on it and driver information. Any way of stoppin gthis?
Thanks
Bill Black
bill@aofdowntown.com

Posted by on

4 Suggested Answers

  • 53 Answers

SOURCE: 1720dn dell

Normally to fix a printer that is printing gibberish, uninstalling and reinstalling the print drivers will fix this issue. Another thing that can contribute to gibberish print is using a USB cable that is too long.

With this particular problem (prints Zen), one solve is to uninstall any Dell toner management software. This is particularly true if you are running Vista and hooked up by USB. To uninstall the toner management software (Vista OS), go to control panel>programs>programs and feature>uninstall a program. From this list choose Dell software, choose a customized uninstall, and then choose anything that has to do with Dell toner management.

Posted on Jan 08, 2009

  • 1 Answer

SOURCE: reinstall drivers for konica bizhub 7222

I work with Konica
If you need Help Email me and we will work out the details latter for as Phone assistance

Thanks
email me at
redwingfan11cups@gmail.com

Posted on Jun 04, 2009

  • 8 Answers

SOURCE: My HP printer is printing out an extra page with

You need to check the mode your printer is printing in. It may be in diagnostic mode. Another reason for having an extra page with info. is the page isn't setup to print all info on one page. Run your setup allignments and testing options to get it all on one page. Hope this helps. -Jennifer

Posted on Jul 09, 2009

TheChiefGeek
  • 7 Answers

SOURCE: Our KonicaMinolta Bizhub C280 Internal Error C2555

You didn't mention the size of the job size, but it sounds like a memory problem. If you have a service contract or it's still under warranty, contact your rep before you start opening things up.

The following is if you don't have a service contract. If the bizhub has been working with no problems in the past, try reseating or replacing the RAM. I've had to replace RAM that started causing problems on classroom computers. If you bought it refurbished (used) check to see the 2GB RAM that supposed to come with the bizhub hasn't been removed or replaced with smaller memory.

Posted on Oct 20, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Printing jobs are coming out blank


Does this happen if you make a copy? Or print any internal form meter count sheet demo page etc.

Mar 14, 2014 | Konica Minolta bizhub C250 All-In-One...

1 Answer

Konica Minolta Bizhub 7222 scaner don't working N-37


Does it print?, Can you ping it. Scan to Email or PC? Or SMB/FTP? Check mail server. also try this site


Self Help Product Support Konica Minolta Business Solutions Inc

Feb 14, 2014 | Konica Minolta Office Equipment & Supplies

1 Answer

C2801 bizhub 750


Sir/Mam,
There is a sensor that monitor the drum some times it gets cover with toner and can not do its job of monitoring the drum which it has to do before copying/printing Sometimes you may also get "please wait" same problem. Have to remove the drum assy. Two bolts and center bolt. Then pull out assy. BE CAREFUL DONT NIC THE DRUM!!!! Then you remove the drum and clean the sensor. (Two sensors the white covered one, clear one is for paper jams) When was the last time a 250,000 copy Preventive maintenance kit was installed? and Drum replaced at 500,000 developer also replaced at 250,000 copies/prints. every 250K PM kit install.

May 10, 2013 | Konica Minolta Konica 600/750 Mount Kit...

1 Answer

Hp 2840 won't stop printing


power off the printer. removed the network cable only. power on until it display ready. now print a config sheet or menu map. if it print without error then connect the network cable and print config sheet again. wait and observed. if it will start printing garbage then KILL the print jobs queued on the printer. after deleting all print jobs power off and power on printer with network cable connected. I hope that will fix the problem. by the way. was there any error display in the panel display like "49.4C02". etc.

Feb 21, 2013 | HP LaserJet 2840 All-In-One Printer

1 Answer

It prints gibberish before the print job.


I have had this happen before, this could be you need to change the drum kit on the printer itself, check the indicator light.

Jul 28, 2009 | Dell 1720dn Laser Printer

1 Answer

Prints an extra sheet with specs on font, characters ....


2f694dd.jpg
click the printer button (shown above) and in the menu there will be an option to print banner page.
please turn this off
that should fix your problem.

May 08, 2008 | Copystar CS-2030 Copier

1 Answer

HP LaserJet 3550 spits out blank paper when job sent from computer but prints fine when printing directly from printer


Try connecting the printer via the USB port on either one of the computers. Then test if the machine prints fine then likely possibility is that the Network interface card is faulty remove the network card and install in a different slot and test. If the same thing happens then reinstall the drivers and test.

Hope this helps
Thanks J

Jan 27, 2008 | HP Color LaserJet 3500 Printer

2 Answers

Conica 7222


How i Reset The Memory OF 7222 Copier Plz Help Me Sir

Oct 20, 2007 | Office Equipment & Supplies

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

222 people viewed this question

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

k24674

Level 3 Expert

7993 Answers

yadayada
yadayada

Level 3 Expert

70387 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...