Question about HP LaserJet 2200D Printer

1 Answer

Hp 2200d laserjet

I have a HP Laserjet 2200d, the printer initializes, it cycles through the lights then the green "go" light stays on. I press the GO button (big button) and it picks up a sheet of paper and then, as the paper is making its way through the printer, the red (amber) light comes on and stays on. The paper comes out of the printer with nothing printed on it...not even a mark, but the paper is a bit warm. All the lights are on at this point and pushing any button, either briefly or for an any length of time has on affect on the printer. I have to turn the printer off and then back on again. Again the same thing happens as described above. The print goes into ready mode, but as the paper begins to move through the printer the amber light comes on. Can anyone help.. please advise

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 71 Answers

Possiably bad gear assembly.

Posted on Jan 16, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Amber and 2 green lights on solid and won't pick up paper


To clear the error, turn the printer off and then on again. If the problem
persists, leave the printer off for 15 minutes to reset the formatter. If
the problem continues, contact HP Service. See HP Customer Care

Oct 26, 2011 | HP LaserJet 2200D Printer

1 Answer

HP LaserJet 2200D - margins cutting off on the left; not all docs


go to hp's website, they have an excellent site for trouble shooting.

Apr 29, 2010 | HP LaserJet 2200D Printer

1 Answer

I have a HP laserjet 6p printer. The only light


it may be you have paper jammed inside the printer, or there is no toner inside it
regards

Mar 24, 2010 | HP Office Equipment & Supplies

1 Answer

Display reads "card slot not initialized"


Turn the printer on.
2 As the printer performs its power-on sequence, press and hold the PAUSE/RESUME (HP Color
LaserJet 4600 models) or MENU (HP Color LaserJet 4610n and 4650 models) button until all
three lights on the control panel are lit.
3 Press . The message INITIALIZE DISK appears on the control-panel display.
4 Press The printer initializes the hard disk and continues its power-on sequence.

Feb 26, 2009 | HP LaserJet 4650n Printer

1 Answer

HP laserjet 2200D connected via USB gives problem


try plugging into another usb & reinstall the driver that may help.

Jan 16, 2009 | HP LaserJet 2200D Printer

1 Answer

HP Laserjet 2200 Keeps Spewing Out Blank Paper


sounds like it has a solinoid that is stuck open.

Dec 16, 2008 | HP LaserJet 2200D Printer

1 Answer

Printer problem


Try replacing your laser unit. They are known to make a high pitch sound when they go bad.

Oct 29, 2008 | HP LaserJet 2200D Printer

3 Answers

2200d hp laserjet


The green flashing light lets you know that the machine is recieving data. This is completely normal, however, the red (Attention) light can mean several things. There can be a door open, missing toner cartridge, out of paper, or paper jam. In this cause it is probably the toner cartridge. Typically on these machines there is an Orange or Green tab on the side of the toner cartridge that needs to be pulled to fully engage the cartridge. You may want to make sure this has been pulled and the cartridge has been properly seated.

Hope this helps...let me know if you need any further assistance

V

Sep 19, 2008 | HP LaserJet 2200D Printer

Not finding what you are looking for?
HP LaserJet 2200D Printer Logo

259 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Seeker5211
Seeker5211

Level 3 Expert

1089 Answers

kakima

Level 3 Expert

102366 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...