Question about D-Link DIR-625 (790069292637) Wireless Router

1 Answer

The ethernet cable from the router needs to connect to the modem phone jack. How do I make that work?

Posted by on

  • duffwhazzup Sep 22, 2008

    I don't understand at all what you're say. The RJ45 needs to be assembled. Isn't there a cable or an adapter for one end of my ethernet cable to go into a LAN (standard ethernet cable size) an and other end to go into an internet phone jack on my modem?

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 97 Answers

- Please provide Network Cable with RJ45 to make connection

Posted on Sep 22, 2008

3 Suggested Answers

  • 34 Answers

SOURCE: WRT54GX2 Wireless-G disrupts both laptop and desktop internet connections

it might be because of interference...no issues dont worry about that...

JUst follow these steps and the issue will be resolved....

1,connect the blue cable between the computer and the router(any 1 of the 4 ports in the

router)

2,connect the other Ethernet cable between the Modem(came from ur internet people) and the

Router's Internet port(standalone port at the back of the router)

3,In the rear panel of the router u can see the reset button.with the help of the paper or

ball point pen,press it hardly and hold it for 1 minute..

4,Now turn off ur modem and the router..wait for other 1 minute..

5,turn onn only the modem first and wait till all the lights lit.now turn on the router and wait

till the power light is solid..open the internet Explorer it should work..

STEPS FOR WIRELESS CONFIGURATION

6,open internet Explorer and in the address bar..enter as 192.168.1.1..it will prompt for a

user name and password..leave the user name blank and the password will be admin.

7,
U can see the option WIRELESS in the black bar..click on wireless..
Wireless network mode should be "Mixed".wireless network name can be ur first name or

anyother name.select the channel as 11 and the SSid broad cast should be Enabled.click on

save settings.it will say like "Settings are successful"click continue.

8,to set the password for ur wireless network...below wireless tab in the black bar..u will

find a blue bar which says "wireless security".click on "wireless security". Security mode

should be "WEP"..Default transmit key should be 1.wep encryption should be 64

bits..passphrase should be empty..in the key 1 box enter ur 10 digit telephone number(ur

telephone number will be ur password for the wireless connection)click save settings and

continue..

9,
now in the laptop check whether the wireless switch is turned on...u can find ur wireless

signal..while connecting it will prompt for a password.enter ur telephone number there..
u will be connected to the internet..

Posted on Jun 03, 2008

RickOz
  • 145 Answers

SOURCE: Connecting Laptop wireless and Desktop wired to the router

Do you need to see the desktop or just share folders from each other? If the latter then you need to do the following:

Use Windows Explorer and select a folder you want to share. Right click and select sharing and security.

On the sharing tab click on Share this folder. Enter a share name ( I like to enter the PC name _folder name; Rick1_Downloads)

Click on Permissions. If your ok with everyone using the PC's and Laptops having access then highlight Everyone and click on Full Control.

Do this on each PC and Laptop.

That should be it or darned near close.

Posted on Apr 10, 2009

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have an at&t 2wire 2701hg-b but i dont have at&t internet i have charter and i am not able to figure out how to get my internet to work with this router please help


att 2 wire is a Adsl Modem (Requires a telephone line jack to get the signals) but charter communication is a cable internet service (not DSL) , Requires a TV cable service for internet .
These two jacks differs and there working differs ..
Means : Att works with the username and password type of authentication but charter requires the MAC address of modem for authentication .
Therefore for a cable internet 2wire 2701hg-b modem cant be used . But yes in case charters has username and password authentication and works with the telephone jack in house then its possible to use the same modem.

Aug 19, 2011 | 2wire (2701HG-B) Wireless Router

1 Answer

Trying to hook up to a modem, but the modem does not have an ethernet jack for the yellow cable.


If you're connecting to a dial-up modem (56K), then you need a filter (this is like an adapter that takes an Ethernet plug in one end and a regular phone line in the other end). You may be able to find a filter at Radio Shack, but I know most phone companies will sell you one.

If you're hooking up to a high-speed modem like cable or fiber optic, then keep looking - it's industry standard to have at least one Ethernet jack, and it would be very strange if your high-speed modem didn't have one.

Mar 27, 2011 | Computers & Internet

3 Answers

I can't get my router to connect to the phone jack


Connect ethernet lan cable to computer and router end.
In router there is LAN port connect lan cable to that port and connect other end of that cable to your computer ethenet lan card.
Then connect phone line jack to router's ADSL Port.
Let me know if you need further assistance.
Thanks for using FixYa.

May 07, 2010 | Linksys Wireless-G WRT54G Router

1 Answer

Just got a new router (motorola) and airport will


Check your connections:

DSL-modem to telephone-jack (or cable-modem to cable-jack).

Ethernet cable from DSL-modem (or from cable-modem) to WAN port on your router.

Ethernet cable from LAN port on router to WAN port on your Airport.

Cut the power to the Airport, and then plug it back in, so that it restarts.

Apr 17, 2010 | Apple AirPort Extreme Router

1 Answer

Wireless connection works fine from the d-link router but the desktop linked from the phoneline keeps going offline. Why?


You've omitted some information about your hardware & configuration & connections.

You should have:

1. cable-modem connected to cable socket (or DSL-modem connected to telephone wall-jack);
2. router connected via Ethernet cable to the cable-modem (or DSL-modem)
3. desktop computer connected via Ethernet cable to the desktop computer
4. wireless device (iPod or netbook or notebook) connected over the "ether" to the router -- this connection will stay "up" almost "forever" (as long as there is AC-power to the router and power to the wireless device).

Which parts & connections do you have?

Dec 26, 2009 | D-Link Computers & Internet

1 Answer

Tryin to install router, but it says ethernet cable not connected? not good with computers,


You should have an ethernet cable between your modem and your router. If it's dsl or cable, either one will have an ethernet cable (looks like an oversized phone jack with more connectors).
BUT this is the important sequence to follow.
Assuming that your modem is working properly already, connect the ethernet cable between the router and the modem. then turn OFF both pieces of hardware AND any wireless computers. THEN turn on your Router first and let it boot all the way. Then once the router is booted, turn on the modem and let it cycle up.
Once this is done, you can turn on all the other computers etc on the system... that should get you up to working status!

Nov 16, 2009 | Linksys Wireless-G WRT54G Router

1 Answer

I need help connecting a westell 7500 router/modem,i want to get a notebook on line. i didnt receive any intsructions.i need help connecting the westell 7500 to my pc and notebook thanking you.


Westell makes a line of broadband home networking products that enable residential customers and users in small businesses to access and share broadband services. These inexpensive DSL router/modems offer multi-users Internet LAN access for home or business applications. The Westell router/modems allow you to have the benefits of the "always on" high-speed broadband Internet connection without losing the ability to receive voice calls over the same phone line.
  1. Step 1 288254_thumb.jpg Connect one end of the Ethernet cable to the computer's Ethernet port. Connect the other end to the Ethernet port on the back of the Westell router.
  2. Step 2 Connect the barrel end of the router's power cord to the connector labeled "12 v" on the back of the router. Plug the other end of the power cord into a wall outlet.
  3. Step 3 Connect one end of the DSL phone cable to the DSL line jack on the back of the router. Connect the other end to the wall jack.
  4. Step 4 Wait for the Ready and the Link LEDs to glow steady green. The router is now ready to use.

Nov 15, 2009 | Westell Wirespeed VersaLink...

1 Answer

After successful instn of my linksys wireless router i cannot access to wireless online connection


Whenever you connect a different device to the cable/DSL modem the modem itself must be reset. Dont even waste a phone call to linksys. Its useless.

If you are using DSL depending on your ISP you may have to enter your account info into the router's PPoE section

Cable users should have the router set to "Obtain IP aadress automatically"

Use the reset button on the back of the router and start from scratch.
Unplug the cable/DSL modem power
Hook up your router WAN/Internet to the Cable/DSL modem Ethernet/LAN jack
Power on the Cable/DSL Modem first, wait about a minute, then power on the router.

Sep 25, 2008 | Linksys Wireless-G WRT54G Router

2 Answers

2 wire 2700 hg-b


The 2Wire 2700 is a residential gateway, a modem and router in-one. There is an RJ-11 jack in the back of the gateway and this is where your dsl phone cord plugs in. There are four RJ-45 jacks in the back for connecting devices using ethernet cable. As a router is can operate both wirelessly and wired. For wireless operation you'll need the WEP key which is located on the tag on the bottom of the gateway. It's the number enclosed in brackets, between the two bar codes.

Redneck Geek

Sep 09, 2008 | 2wire 2700HG-B Router (2700HGB)

2 Answers

LinkSYS ADSL2 -AG241Modem + Router Ethernet


Hi,

First : check your cables if its plugged in securely on each each
port
Second: Try to change their ends
Third : Try to replace your Ethernet cable.

If your router is connected to a modem try to isolate the problem by connecting your router directly to your computer and check f light would turn on. IF YES then thers something wrong with your modem, check it out.

Hope those simple steps ive provided helped you in way, If not pls let me know and lets keep the ball rolling.

Cheers.

Jun 19, 2008 | Linksys ADSL Modem + Router With 4-Port...

Not finding what you are looking for?
D-Link DIR-625 (790069292637) Wireless Router Logo

Related Topics:

41 people viewed this question

Ask a Question

Usually answered in minutes!

Top D-Link Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2259 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18334 Answers

Mike

Level 3 Expert

4332 Answers

Are you a D-Link Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...