Question about Westinghouse LTV-32w1 32 in. HD-Ready LCD Television

1 Answer

No Color Tried adjustments that are in the Owner's Instructions with no luck color problem, no red

Posted by on

  • markus1961 Sep 21, 2008

    That was great...the conection had come loose...it's all gravy now!

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 70 Answers

Are u using component video? if so make sure green is in green and not in blue by mistake this will cause a black and white picture

Posted on Sep 21, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No color red on Proscan PLCD5092a TV


T'Con board fault. If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/
Faults & possible causes to LCD screen are given with illustrations. You can get an idea about the fault to an extent.

Sep 01, 2014 | Flat Panel Televisions

1 Answer

All the colors for all programs are blue and yellow on tv. have tried all the picture settings but nothing changes.


hi" do you try to adjust color settings.theres a red,blue,green color adjustment under picture setting.
try to set red color to full.
of you already do that.
probably your display driver board has a causes the problem.
display driver board produce image comes from the tuner, then it sent to x and y drive of your LCD screen.

Aug 30, 2011 | Sanyo DP26647 26 in. LCD TV

1 Answer

I have a toshiba tp50h50 rear projection tv and their is a blue shadow behind the words and makes the words a little blurry


Sounds like you need to do a color convergence. If you still have the owner's manual, it will give great detail on how to do this. The convergence menu is accessed from the video menu on the tv.
The tv has three color picture tubes, red, blue and green. The convergence alignment adjust each tube so that color from each tube overlaps each over to create a white image on the screen. Most tv's only allow you to adjust the blue and red colors.
Convergence should be performed each time the tv is moved and at least once annually.

May 16, 2011 | Flat Panel Televisions

1 Answer

Color in tv is very green you cant tell what suppose to be what i was watching cartoons with kids and the animal that suppose to be red was black i tried adjusting color temp and every thing even resetting...


If your using a tuner for your TV channels and you are using component video cables make sure that the red cable is not plugged into the audio socket. red blue and green cables should all be plugged into the "component" input on the tv not audio.

Dec 27, 2010 | LG 42LC2D 42 in. LCD HDTV

1 Answer

Red Tint on Screen


This is normal and is a color calibration issue.

For correct color, NEVER use the "WARM" setting. Why? Too red. You cannot get REALISTIC or ACCURATE color using the "Warm" setting.

Since we are speaking of Samsung, first avoid the "Flesh Tone" adjustment. When things are set correctly there is no need for this adjustment. It is a quick fix and not for the "discerning eye".

1. First, access the "Color Temperature" menu. From here select "Cool2" or the coolest temperature setting.

Note: For Samsung use "Cool2", or if not available, "Cool1". Samsung has inadvertently increased calibration confusion by issueing TVs that have just "Cool1", and TVs that have both "Cool1" and "Cool2" :0[

For other brands, use "Cool", or "High", or "+6500k". Anything lower artificially reddens the picture and compromises detail.

2. Now return to the color settings and reduce "Color" to between 30 and 40 (on a 100 scale). The sweet spot is just near the place where the color rapidly washes out.

3. To round out the color palette, move to the "Tint" adjustment and ADD a couple (3-5) clicks to the GREEN.

Adding the touch of green is what is needed to take out the last bit of "pink" and will make all the tones and all colors display properly.

I hope this helps!

To further increase the quality of your picture visit
http://www.wowvision.tv/main.htm

Highdefjeff :0]



Jun 15, 2010 | Samsung LN46C630 TV

1 Answer

Faces on the screen are too red. Adjusted color


From all sources? cable/DVD/other inputs

If it is from everything, you could try to reset all settings back to the factory defaults and see if that improves it. Check the users manual for instructions.

Apr 21, 2010 | Sharp Aquos LC-42D62U 42 in. LCD HDTV

1 Answer

Images on screen are very red. Tried adjusting everything in the menu but still every thing is like glowing red.


Color balance is labeled "Tint"
Color amount is labeled "Color"

Both are in the "picture" adjustments menu.

Either your tint is swung too far to red, or the color setting is wide open making normally pink faces look sunburned...likely it's a combination of the two; Too much red, and a bit too much color.

Going back to the "default factory setting" in "setup" will also drop all settings to center.

Mar 30, 2010 | Hitachi 50V500 50 in. HD-Ready LCD...

2 Answers

There is no red in the picture. Tried adjusting


I know the fix, but fixya.com doesn't answer my questions for free, why should I help them?

Dec 23, 2009 | Panasonic Viera TH-42PX80U Plasma TV

1 Answer

I can't get the color, contrast and other color adjustments adj


I took the tv back and bought another one. got a three year warranty thaanks

Oct 05, 2009 | Haier Flat Panel Televisions

2 Answers

Panasonic TH-50PX60U Plasma TV no red color


I had the exact same problem. Thought it was the tv, but it was the cable between my cable box and the tv. Try unplugging the cords and plugging them back in, color was restored.

Oct 12, 2008 | Panasonic TH-42PD50U 42 in. Plasma EDTV

Not finding what you are looking for?
Westinghouse LTV-32w1 32 in. HD-Ready LCD Television Logo

Related Topics:

72 people viewed this question

Ask a Question

Usually answered in minutes!

Top Westinghouse Flat Panel Televisions Experts

Dave Naylor
Dave Naylor

Level 3 Expert

834 Answers

The Knight
The Knight

Level 3 Expert

68157 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

Are you a Westinghouse Flat Panel Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...