Question about Projection Televisions
I also own a 3003/27 and use a t.v that does not have a code. you can program your t.v by following these steps.
1: Manually turn on ur tv
2:hold setup untill red indicator stays on and release button
3: press and quickly release what you wanna program (i.e tv,vcr,ect.)
4:press channel up repeatedly untill your t.v changes channels(up to 300 times) if you over shoot the channel change press down til it changes again.
5: press and release MUTE to install the code.
Hope this helps you as it did me.
Posted on Jul 17, 2009
First check the website to see if codes are avalible, but most likely not. you probably will wind up having to exchange the remote i know its not fun but look for a higher priced remote it will probably have the codes and it will be cheaper than ordering one from the manufacturer
Posted on Sep 21, 2008
Tips for a great answer:
May 18, 2016 | Philips Magnavox 51MP392H Rear Projection...
Jul 25, 2009 | Projection Televisions
Apr 21, 2009 | Projection Televisions
Apr 17, 2009 | Projection Televisions
Sep 15, 2008 | Philips Magnavox 51MP392H Rear Projection...
Aug 18, 2008 | Projection Televisions
Aug 15, 2008 | Projection Televisions
Apr 25, 2008 | Projection Televisions
Apr 08, 2008 | Projection Televisions
Feb 18, 2008 | Philips Magnavox 9P6034C 60" Rear...
154 people viewed this question
Usually answered in minutes!