Question about Projection Televisions

1 Answer

I want to connect two dvd players to my tv can you help

Posted by on

  • Larry May 11, 2010

    There are alot of solutions what TV what DVD's

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 70 Answers

Yes i can i dont have all the info i need about your tv so ill give you a couple of ways
if your tv is hd
if tv is hd and dvd has hdmi use hdmi if not use component video cables and if your tv is regular use s-video or yellow red and white(composite cables)
ok first connect the cables from the output section of dvd player and connect the other end to the input on your tv. do the same for the other dvd player as well out in the dvd and in into the tv
select the input number on your tv to watch
if your tv doesnt have enough connections on the back you will need to buy a selector(switcher)from any store carrying electronics
if this is case run the cables out from switcher into tv then on the dvd out from dvd and in to selector
if you need more info let me know your wich situation applys to you and i can clarify

Posted on Sep 21, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a mitsubishi HD1080 series TV and wanted to know how do I plug in a dvd player. Then how do I get it to play.


Connect an HDMI cable from the DVD's HDMI port to an unused HDMI port on the TV. Select the input from the settings menu and name it DVD or select the DVD name. Turn the DVD player ON. Using the input select button on the remote, select the HDMI DVD input. Wait a few seconds while the TV and DVD player establish a connection. The DVD player menu should appear. Insert a DVD and enjoy a movie. Hope this helps. Regards.

Jan 02, 2016 | Mitsubishi Projection Televisions

2 Answers

Picture in picture operation & connection to dvd player


Now--first--connect the DVR cable box HDMI output to the HDTV HDMI input (use the lowest numbered one e.g. HDMI 1) for this connection. Use a standard (not Monster brand) HDMI cable for this connection. Then turn on the TV, turn on the cable box and switch the TV to the HDMI input. A picture should come on. You may even hear the audio on the TV speakers. If so, that is OK.

Then--connect the component video output of the DVD HT to the TV component 1 input. Use a three wire component video cable with red, blue and green connectors on each end. Connect color to color on both ends. Then turn on the DVD, put a DVD in the player and start it running. Switch the TV to the component input and it should show a pix. The audio will come from the DVD player speakers.

If your DVD player does have an HDMI output, you can use it and just connect as above to the second TV HDMI input.

To get audio from the cable box out of the DVD player speakers, you will need to connect an audio cable from the cable box go the HT amplifier. Use a set of RCA patch cables and go from the analog audio output of the cable box to the rear panel audio inputs of the DVD player. The owners manual for this unit will give directions on using this input. Since your HT unit does not have any other inputs, you will not be able to get Dolby Digital audio.

Hope this gives you food for thought. If so, and you have more questions, just come back in with a follow up.

Good luck. Remember, the owners manuals all have hook up connections diagrams. Sometimes they will help.

Dont forget to rate me as fixya..

Jan 30, 2008 | Samsung HLP4663W 46" Rear Projection HDTV

1 Answer

I recently purchased a KDL-40W5100 LCD Digital Color TV. I gives a great picture, but when I turn on my Panasonic DVD connected to it I get a blue snowy picture (it worked fine on the old TV)Can you help?


Hi,
This may be due to a setting on the dvd player itself. What kind of tv did you have previously? Also what kind of connection are you using to hook up the dvd player to the tv? Lastly, if you have the model number for the dvd player it will help if/when you need further assistance.
Thank you,
Lee

Dec 11, 2009 | Projection Televisions

1 Answer

How do I change my remote for TV to Input Video 1?


There should be a button on your remote denoting "Input." If you connect the DVD player to the TV on "video input 1" then push the input button on the remote or TV itself until the DVD appears on your TV (which will be Video 1). Some TVs must have the component (in your case) the "DVD" player connected to the TV before the TV will recognize it. Make sure the DVD is powered up and then push the input button until the DVD player appears on the TV. Depending on your TV inputs, there may be multiple inputs like, Video, Component, DVI, or HDMI. The above are listed in the respective order of "quality." HDMI being the best. Whatever input you hook the DVD player up to on the TV will be the "input" you will look for when pressing the input button. Hope this helps.

Oct 26, 2009 | Mitsubishi WS-48515 48" Rear Projection...

1 Answer

Older ge tv but cable ready-no remote.... need to find channel to play dvd player on.Recently connected dvd player but can't play a dvd.The tv is connected to a cable box.


Hey wegodsky,

If you're not able to find the right channel on your TV to use your DVD player, you may want to try changing the TV's input source instead. Many TV models will require that the TV be set to an external antenna in order for any other device (like a VCR or DVD player) to function correctly. This can usually be done by pressing the menu button on the TV itself and selecting an option similar to "Input," "Source" or "Antenna" if you do not have a remote control for your TV.

Hope this helps you out.

Sincerely,
Aaron
Go Ahead. Use Us.

Jun 19, 2008 | Projection Televisions

1 Answer

I am trying to hook up my tv to my receiver, I have a dvd vcr combo,and cable box


Audio: There should be a set of audio outputs on your TV. Connect those to the AUX inputs of your receiver. When you turn on your receiver, set it to AUX. Set your TV volume to approx 1/3 and adjust the volume on your receiver. There's probably a menu section on the TV to turn off your TV speakers so the sound will only come from your receiver.

DVD/VCR (I'll call it DVD from this point forward): Connect the video (yellow) output from the DVD to the "video input" on the back of the TV. Connect the audio out on the DVD player (red) to the red audio input on the back of the TV, then do the same with the other audio (white). When you want to use your DVD player, you'll select "input 1" as the input on the TV.

Cable: Your cable box probably has numerous output types. I have the cable box hooked up to both the DVD player AND to the TV; one output type going to the DVD player and another output type going to the TV. I like to use the HDMI output from the cable box to the TV, and the composite video from the cable box to the DVD.

Hope this helps. Let me know if you need more info.

Mar 18, 2008 | Projection Televisions

1 Answer

I have just purchased a Toshiba Integrated Digital LCD TV and I can't seem to run my DVD and Video player through the TV. I'm probably not connecting it right, but don't know what else to try. Thanks for...


The DVD and video player have HDMI. Component, S-Video and RCA audio/video output connections that need to be connected to the appropriate inputs on your TV. You select the type of connector and cable to use.

HDMI provides the best quality, if available and works for both audio and video.

The TV's, DVD's and video player's manuals describe how in detail. Look at the connection instructions and diagrams. You then must select the correct input on the TV to play each source.

Mar 09, 2008 | Projection Televisions

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

51 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

yadayada
yadayada

Level 3 Expert

60867 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...