Question about Kenmore 24 in. 15932 Built-in Dishwasher

1 Answer

Ultrawash kenmore diswasher

Bought it in 2005. used it about once a week. worked great. one day, nothing happened. No lights on panel come on! power to it is good, of course i didn't but the extended warranty! Would like your help/advise.

Thanks, Paula

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

  • Expert
  • 171 Answers

Hi TUXI,

I'm Harvey the Master Plumber.

Your problem is: bought d/w in 2005. used it about once a week. worked great. one day, nothing happened. No lights on panel come on! power to it is good, of course you didn't buy the extended warranty! Would like your help/advise.

First recheck the electrical connection in the junction box under the d/w. It could be you have a loose or broken connection. If all is well there you probly have a bad control board. I don't recomend this repair to the average homeowner. You might consider the Repair Directory for a repairman.

Feel free contact me again!
Please give me a rating here at fixya before you sign off
Thank you,
Harvey your Master Plumber

Posted on Sep 21, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Once dishwasher starts wash cyle, it keeps running wash cyle indefinitely. what do i need to do


Possible that the diswasher control panel is not in order and is a suspect. remove power for some to reset the board. Try with different program and if the same action continues check with the panel board before you can think of swapping to confirm the case.

Jun 28, 2012 | Kenmore 24 in. 17482 / 17484 / 17489...

1 Answer

Kenmore Ultrawash Quietguard Deluxe Problem


kenmore washers nothing but problems, my washer says clean and will not do any cycles...... less that 2 years old

Oct 21, 2009 | Kenmore Dishwashers

1 Answer

Kenmore Ultrawash Quiet Guard 5 making buzzing/grinding noise


I have a very similar dishwasher, with a very similar problem. I fixed it by removing debris from the water evacuator pump located towards the front of the bottom of the machine (the last motor before the drain hose. In my case, grape stems had clogged it up. Once emptied, it purrs once again. NOTE: don't disassemble the motor, just flush it out, there is an o-ring gasket that is a bear to re-install.

Jun 22, 2009 | Kenmore 24 in. 15689 Built-in Dishwasher

1 Answer

No power to the dishwasher


Remove the kick plate, there is a box where the power enters on right, If you have power than its most likely the control board. We have em and will assist you on the phone 704-819-6557

Mar 14, 2009 | Kenmore 24 in. 17032 Built-in Dishwasher

2 Answers

Kenmore Quiet Guard 3 leaves soap film. This happened before and we realized it wasn't standing straight. Bringing back to balance seemed to fix it. Now it's happening again but doesn't appear to be a...


We have had the same problem with clear glasswear with both Kenmore and Maytag diswashers, in fact any diswasher I have used. It seems to be a problem with diswasher soaps. Either try a different soap (continue using Jet Dry), or do what I do and periodically go over your glasswear with an SOS pad.

Mar 09, 2009 | Kenmore 24 in. 15932 Built-in Dishwasher

1 Answer

Diswasher stopped working


There is a thermal fuse on the controller that commonly goes out. If you take apart the panel, and see the computer part, there is usually a part clipped on the side with 2 wires on it. When that goes out, it acts like there is no power to the unit. Very easy and in-exspensive to replace if that's it. It's pretty common on those. Good luck

Feb 15, 2009 | Dishwashers

2 Answers

Maytag dishwasher, no power, then flashing lights, now no power.


Had the same problem, removed the kick panel to find a set of instructions under the insulation, had to push a sequence of the panel buttons, its been running great for a couple of weeks now!
Jeff

Dec 23, 2008 | Maytag MDB7100AWB Dishwasher

1 Answer

Works then no power Kenmore 16352


first thought would be a loose connection in the junction box under the dishwasher.

Nov 27, 2008 | Kenmore 24 in. 16352 / 16354 / 16359...

1 Answer

Diswasher stopped working


there is a fuse in the washer that needs to be replaced reply to me and will walk you through it

Dec 31, 2007 | KitchenAid 24 in. KUDI01FLSS Stainless...

Not finding what you are looking for?
Kenmore 24 in. 15932 Built-in Dishwasher Logo

Related Topics:

122 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Dishwashers Experts

Fred Sops

Level 2 Expert

271 Answers

D. E. Hev

Level 3 Expert

1059 Answers

Raisin Brann

Level 1 Expert

28 Answers

Are you a Kenmore Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...