Question about Whirlpool GEW9200L Electric Dryer

1 Answer

Sport Duet dryer will not start, even though power light is on

This dryer is only 9 mos. old.  When I push the power button it comes on plus the wrinkle reducer lights flashes off and on---only way to get it to stop is by opening the door.  Even then, the dryer will not start.  Unplugged for a night, got a -- -- signal, then it worked!  Now, it's back to the original problem!  Anything you can suggest???thank you!

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 750 Answers

If the unpluging for the night helped reset the system and then worked?
Then there is an electronic problem that needs to be addressed and diagnosed.
You have 3 mor months warranty so I suggest you start using it now .
Therefore you have a record of this problem before it ends and if anything happens after the end of your warranty they will help you anyway or replace the dryer for you ,ANYWAY! Yes they do that if they see there were defects prior to the end!!
If you ever have a problem after the warranty is up call, " Whirlpool Consumer Affairs"
They have the power!

Make an appointment with Whirlpool now and it will cost you nothing.

Let me know what they find.
Huuum

Please remember to leave me a rating!

Posted on Oct 10, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Whirlpool duet dryer wed9600tw acts like it has no power to it, later it will come on and work fine


it' sounds like it tripping the thermal. so you might need to get into the heater and clean out the debris AND sweep the exhaust pipe
see these http://www.homedepot.com/p/Everbilt-Dryer-Vent-Cleaning-Kit-DVBRUSH12K-6HD/205047060

Jun 09, 2017 | Whirlpool WED9600T / WED9600TA / WED9600TW...

1 Answer

My Dryer will not turn on. I push the Power button and nothing happens. The dryer is getting power as the interior light still comes on. My washing machine leaks copious amounts of water during the wash...




Hi,

There can be many reasons why your dryer will not start or turn...

The most common causes are the belt breaking or jumping off, or the motor going bad...

Here are a couple of tips that I wrote will help you to figure out why your dryer will not run...

Dryer Repair - The
Dryer is not Turning

Dryer Repair - The
dryer will not start


heatman101

Feb 20, 2011 | Whirlpool Duet Sport 6.7 Cu. Ft. Gas Dryer

1 Answer

The status reads "control locked" and the dryer will not function


Try pushing and holding the 'End of Cycle Signal' button for 4 seconds. Let me know if that works.
Thanks!

Jun 14, 2010 | Whirlpool Duet 7.0 Cu. Ft. Super Capacity...

2 Answers

Dryer wont start - no lights


Dryer door does not think it is closed. There is a sensor on the top of the door that is probably not making contact with the door. Trying pushing the top part of the door and holding it then press the start button.. if the unit starts running then you know what it is. I just had one of these dryers delivered today and had to find out about this by myself tonight!!

Apr 30, 2009 | Whirlpool WED9500T Electric Dryer

1 Answer

Whirlpool Duet Dryer (2yrs old) Light buld died and dryer won't start. We changed bought a new light bulb but the dryer still doesn't start. The computerized buttons still litght up though.


Sometimes when a bulb goes out or is replaced the unit can short out.

Try holding your end of cycle signal button for 5 seconds, watch the light, if you control lock it, it will light but will not run because control lock is a safety feature.

Also try pushing door in and starting it, might be bad latch

May 02, 2008 | Dryers

Not finding what you are looking for?
Whirlpool GEW9200L Electric Dryer Logo

77 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Dryers Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Tim Whalen

Level 3 Expert

3074 Answers

Sal De

Level 3 Expert

2699 Answers

Are you a Whirlpool Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...