Question about Projection Televisions

1 Answer

I put in a black cartiridge in my tri color printer and now it won't print

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I fixed the problem myself. No thanks to you all, who gave me the run around. GO **** YOURSELF.

Posted on Sep 22, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Lost color


It could be the color processor module, could be locked up, or your tuner is going bad. First thing to do is unplug the AC cord, from the the AC outlet for about 40 Minutes and that will reset the color processor. if you still have problems, then bypass the tuner, and go directly to the video input with a DVD player, or Video game player "360 x box" or anything that you can hook up to the video input. Make sure to put your TV in Video mode, if you have color now , than you have a bad tuner, if it is still black and white, than in is the color module that is bad, or your color control is turn all the way down.

Mar 23, 2014 | Samsung HLN437W 43" Rear Projection HDTV

21 Answers

I have a problem with my epson 9600 it's about 3 years old the black is printing in dart green, I tried to clean the head but no joyed, the reading is showing E*****F for both Head & Cleaner. Can...


Hey,

3 years, its definitely a problem in the printer head or the cardridges, try performing the print head cleaning a few times, also alingment? You can also clean the carts and connectors yourself.

Thanks,
Ekse

Sep 06, 2008 | Projection Televisions

1 Answer

I tried to adjust the color on the back, then the picture went black. Now I can't get any picture back. What should I do?


Put the screen controls back as close to there original position then unplug the set for 5 minutes. Those are sensitive adjustments for excessive beam current the set will shut down and the micro will latch up. Like I said, unplug then try again. You may have to do this a couple of times. The closest way to adjust them without a dvm is having the set in aux mode, turn r-g-b screen controls counter clockwise, look into the red crt and raise the red control until red is just visible then repeat for the other two. If your gray scale is off such as to much of any one color, turn that one down just a little. The last part I just stated is with a picture on the screen. Your picture should be black and white with no color added. (turn the color down via remote control)

Nov 27, 2010 | Philips 50P8341 50" Rear Projection...

2 Answers

Have a polaroid tv, model 3700 seriel F0600181940001053. WATCHING THE OTHER NITE AND A LOUD SQUEAL CAME ON AND THE PICTURE WENT OUT, TURN IT BACK ON TODAY AND THE SQUEAL IS STILL THERE WITH NO PICTURE..NO...


I have a flat screen polaroid lcd hdtv model 3700, first the sound started to get really loud with a beeeeeeeeep when we turned on and after a while was gone, now it doesnt! we had to put mute and connect the tv to a sorround system to hear it without that crazy noise, and now the colors of the tv are gone too its just black and white when we try to see the dish satelite but if we put a movie on the dvd player colors are perfect we try to conect the ps3 player too but its black and white too. Help what can it be!!!!????

Nov 14, 2008 | Projection Televisions

2 Answers

Picture Problems


check for poor grounding of the input signal cable wire.
easy way to check this is put in a dvd and is that in color?

Feb 01, 2008 | Sony KP-53XBR200 53" Rear Projection...

1 Answer

Adjustng crt colors


put on a black and white channel and adjust to best black and white

Feb 01, 2008 | Hitachi 57F500 57" Rear Projection...

1 Answer

52 rca concave pic and bad colors


concave and colors off indicate the convergence cuircit is bad. which can be one of three boards. sorry

Dec 08, 2007 | RCA HD52W56 52" Rear Projection HDTV

1 Answer

No color


does the tv use Svideo as an input from whatever device you're using on the main screen? if so , try changing out the cable for a new one, svideo carries 2 signals, color and brightness (ie color and black signals) if your cable is bad or broken, you may only be getting one of those signals ( the black one) try a new cable if it's s-video. if it's not, get back to us.

Sep 13, 2007 | Hitachi 50SBX78B 50" Rear Projection...

1 Answer

32 inch rca color


If this is a 32 inch TV then it is a standard picture tube set. If the colors have suddenly gone out of whack, and the set has not been dropped or had any large magnets near it recently, it means that the degaussing thermistor has come loose from its legs. This is very common in the RCA regular picture tube sets. If you look in the back of the set you will see a large black coil of wire wrapped around the edges of the picture tube, with 2 white wires going down to a jack on the main PC board. Right next to that jack is the degaussing thermistor, which looks like a small silver disc, like a nickle, with 2 legs loosely soldered to its sides. One or both of those legs are probably loose, and if you are very careful you can solder those legs back onto the thermistor. If you do not have experience soldering small parts, allow a qualified tech to handle it for you.

Aug 26, 2007 | RCA HD61LPW175 61" Rear Projection HDTV

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

13 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

yadayada
yadayada

Level 3 Expert

60667 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...