Re: zoom adsl x6 model 5590c bar code 2257 5590 72 00cf...
I have a zoom 5590c modem and my pc is only on for about 15 minutes at a time and then my e-mails go off and i keep getting page load error so I have to switch off and back on again anybody have any ideas of what is wrong with it.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
you should try reset to factory settings, may be you should look behind your zoom device, there is small hole or something that have words "RESET". All password will be empty, but you should reconfigure for your zoom device
In the Enter Network Password dialog box, type the
following username and password in lowercase then click OK. (Note: The
modem User Name and Password you enter here are NOT the same as the
User Name and Password that your Internet service provider may have
User Name: admin
Password: zoomadsl (where "l" is a lowercase letter L)
If you are not prompted for a User Name and Password, click here for more information.
hello. with regard to your concern.. the network key is probably under the adsl x6 or at the side of the device.. if you cant see it.. try to access the setup page, but you need to know the default gateway of your adslx6, to check the ip address right click the network icon on the lower right taskbar of your computer and select on status, select support and it will show the details.. ex. your default gateway is 192.168.1.1, pull up a brower and at the url, type the default gateway, 192.168.1.1 then it will ask for the username and password.. after entering the username and password.. go to the wireless setting and it will show there the network key..
You dont need both. Do the following: Unplug your speedtouch from the phone line at the back of the speedtouch unit. Plug that cable into your Zoom. Then plug one end of an ethernet cable into router and one end into your PC.
Type http://10.0.0.2 into a web browser (eg. Firefox or Internet
explorer) username/password is admin/zoomadsl go to basic setup and
input your ISP username and password (the one given to you by your
internet provider) under PPP. Click configure my connection. Save
changes and then write to flash (both buttons on bottom of page)