Question about Jet 708715PK/JTAS - 10X50 - 1PK 3HP 1Ph Xacta JTAS - 10X50 - 1PK 3HP 1Ph Xactasaw Right with 50 Ence Table and Legs , Tablesaws

1 Answer

On/off switch Suddenly my table saw switch won't turn off. If I hold down off button, saw begins shutting down, but when I release finger from off button, saw turns on again. There are two adjustable dials inside swith housing. One says "test" "man" or "auto". This one is on test. Other notched wheel is set just below"18", but can be set higher or lower. Could either be adjusted to make magnetic contact of "off" switch respond correctly? Can dust be effecting contact? Looks clean, but maybe contact need to be cleaned? ThaNKS

Posted by on

  • clifff Sep 22, 2008

    Thanks emissionwiz,

    I think the contacts are behind the man/test/auto dial but I can't figure out how to get at them. Hoping not to have to replace whole switch. Any info on how to replace them?

  • ROROBERT622 Dec 16, 2008

    MOTOR KEEPS RUNNINGS AS SOON AS I PLUG IT IN.SWITCH WON'T SHUT OFF

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Jet Master
  • 60,792 Answers

The contacts in the switch are burnt, replace them.

Posted on Sep 21, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Craftsman model 137.415030 10 in portable table saw won't turn on. It is getting power the switch sounds like it is working ok but it won't turn on. The reset button ,does not appear to do anything.


My table saw motor just stopped.. What do I do? - The WoodenBoat ...

forum.woodenboat.com/showthread.php?...table-saw...I...

WoodenBoat
Apr 6, 2013 - 23 posts - ‎20 authors
Does the motor have an internal thermal cutoff switch? ... Auto reset on a table saw, now that would be scary. ... A Craftsman, I think. ... The saw is a Grizzly 1022Z contractor-style saw about 10 years old. .... After the motor cools down the switchneeds to be pressed to restart the motor, it won't start suddenly ...

My table saw stopped, the reset button won't reset. What ...

www.shopyourway.com > Manage My Life > Questions
It is a Craftsman Table Saw Model 137.248880. ... I pressed the reset button and the saw restarted. I continued ... My table saw stopped, the reset button won't reset. ... One was just the switch the other the rocker switch, identical except in cost.

Craftsman 10 table saw motor stalled - Yesterday's Tractors

www.yesterdaystractors.com > Discussion Forums > Tool Talk

Dec 25, 2015 | Craftsman 21802 10-inch 13-amp Portable...

1 Answer

When I take my finger off the start button the saw stops


most prob in start stop switch..called a latch but with out any info on type/make/mdl, impossible to confirm.

Dec 31, 2013 | Table Saws

1 Answer

I have a delta contractors table saw that wont start. It has a Marathon Electric Motor 62-044 that hangs off the back. It has capacitors rather than brushes. When you turn on the swithch it does nothing. I...


Most likely to quit suddenly is the switch.
My table saw switch broke recently, and at first I thought it was the motor.
Over the years I remember seeing table saws fitted with a handy box and ordinary light switch to replace the table saw switch.
Check for power at motor: Sometimes the wire connection from switch has access box on the motor where you can get in and check for power.

Feb 01, 2011 | Delta 36-979 10" Left-Tilt Contractor's...

1 Answer

Cutting 3/4 plywood with craftsan table saw. Motor stopped ???


either overheated the motor and there is a reset at the back--it's a button make sure your out of your wood and fingers away from blade, push it in, see if it restarts, could be a bad extension cord ,connection at the plug ins or you blew a fuse. 3/4 kinda tough
also blade might be dull.heated motor and shut it down.

Oct 31, 2010 | Craftsman 10" Table Saw

1 Answer

While cutting , i experienced a bind. Before the saw stopped I shut it off. Left overnight, now will not restart. I have pushed the thermal reset button, however it does not seem to engage. I have checked...


Is this a direct drive or belt drive saw? If belt drive, you can remove the belt and try spinning the motor by hand then turn it on. Sometimes they can get stopped in a dead spot. Do not get your hands/fingers in the way when turning it on. You may need all of them someday.

Aug 08, 2010 | Hitachi C10FL 10" Stationary Table Saw...

3 Answers

Saw will not run


I had the same problem several months ago with a craftsman (shut down during a long rip), and the reset switch had tripped but did not actually pop out. I tested everything in the line between the power supply and the motor, and found out that the reset switch was not conducting. I was able to reset it manually before re-installing it into the saw, and it's been fine ever since. I'd test that before you start pulling the motor out, it would be a much easier fix if the switch was just sticking.

Apr 13, 2009 | Craftsman 10" Table Saw

Not finding what you are looking for?
Jet 708715PK/JTAS - 10X50 - 1PK 3HP 1Ph Xacta JTAS - 10X50 - 1PK 3HP 1Ph Xactasaw Right with 50 Ence Table and Legs , Tablesaws Logo

Related Topics:

243 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jet Table Saws Experts

yadayada
yadayada

Level 3 Expert

60769 Answers

Kirk Augustin
Kirk Augustin

Level 3 Expert

2019 Answers

Todd Zettlemoyer
Todd Zettlemoyer

Level 3 Expert

533 Answers

Are you a Jet Table Saw Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...