MY CROCK POT PLATE IS BROKEN, I WOULD LIKE TO KNOW IF I CAN REPLEACE IT, AND IF A NEED AN US ADDRESS OR IT CAN BE MY ADDRESS IN MEXICO. AND THE COSTS. THANK YOU.... MY MODEL IS 5855 OVAL PROGRAMABLE. THANK YOU LUCY
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
If you want to use it for food tomorrow, you need to burn it in tonight; 1 hour or longer at 400 degrees, outside but protected, to burn off the factory oils, etc. If you cook in it without doing this, you will ruin the food (and the atmosphere) with bad smells.
This turkey is really bigger than Rival recommends for this roaster, so check the size/fit tonight, also. You need an inch all around for best cooking.
I use 325, not 375 as the Rival manual suggests, 4 hours for an unstuffed 18 pounder.
I have seen this so many times you'd think rival would improve the handle with a better material...
I used a cover handle from a glass covered sause pan, you can get them at the dollar or thrift store- much better handle anyway.
I do not recommend using a drawer nob with teflon washers and a screw that you can get from the hardware store- the threads of the screw may (will) come in contact with the glass and the glass will break.
use a handle from a glass covered pan you already have or spend the 3 - 8 bucks at a dollar or thrift shop, and throw the pan out. it will be worth it just in less agravation and having a functional tool...
Rival doesn't seem to care that their lid handles don't hold up. I'm going for the drawer-pull solution, myself! You would think a big company like that would be interested in how poorly their products hold up, especially since the cooker itself (I also have the SC609) is just fine; it's just a case of using poor quality materials for a lid handle. Or maybe it's planned obsolescence, hard to tell.
No, I have not. I was going to check with Rival to find out if the handle on the 18 qt would fit but I think that means I have to buy the whole lid. When I spoke with them before they would sell the lid but not just the handle. However, they didn't have any 16 qt lids. Seems ridiculous that you can't just buy the handle but I don't know what else to do.