Question about Hotpoint 24 in. FDW60 Free-standing Dishwasher

2 Answers

FDW60 Following lights keep showing on dishwasher Fast 40C and Delicate 50C and tablet compartment doesnt flip open until door opened so tablets dont wash properly

Posted by on

  • stevemof Sep 29, 2008

    We have the same problem. The manual suggest that non disolving tablets can be cured by moving the cuttlery basket away from below the fip up door. Where else do they think the baket ill fit???!!! The bottom rack is desgned for the cttlery basket to fit exactly there! Can anyone help?

×

2 Answers

Hotpoint have said its a heating problem. My mate repairs washing machines so hes gonna have a look at it for me now we have a problem area

Posted on Sep 24, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have exactly the same problem, please let me know if you find a solution and I will do the same.

Posted on Sep 23, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have an hotpoint sdw60 dish washer that is flashing 2 yellow lights, these are numbers 5 and 7 (fast and dry 40c) and (delicate 50c) can anybody tell me what this means.thankyou


Hotpoint Indesit dishwasher flashing lights fault error codes ...

? 15:08
www.youtube.com/watch?v=FRLbrBPHcnE
May 3, 2015 - Uploaded by how-2-repair.com
http://www.how-to-repair.com/help/hotpoint-aquarius-fdm-dishwasher-flashing-lights-and-there-fault-codes ...

Oct 02, 2015 | Hotpoint Dishwashers

1 Answer

Dishwasher not finishing cycle


A10 4 + 6 Heating circuit Heating element, connections, module,
relay, pressure switch

A10 Open circuit in heating circuit.
• Check the circuit of the heating element (26 ohms).
• Check for an open circuit heater cut-out.
• Check pressure switch open circuit (connections 11-14).
• Check wiring and connections between module card, pressure switch and heater.
• If all above is OK, replace module card.

Sep 18, 2014 | Hotpoint 24 in. FDW60 Free-standing...

1 Answer

Fdw60 is flashing fast and delicate lights


The code is a10 this is normally a heating issue but could also be a foaming problem which could also be your poor washing results put a cleaner through with a lime scale remover

Jan 24, 2014 | Hotpoint 24 in. FDW60 Free-standing...

1 Answer

Hotpoint FDW60 DishwasherTablet does not dissolve


our HOTPOINT FDW60 is not working right?
the tablet is not disolving inside right how will i fix it?

Feb 07, 2013 | Hotpoint 24 in. FDW60 Free-standing...

1 Answer

The main wash door doesnt open


switch to pre-measured tablets,and throw the tablet directly into the tank(d/w..)it works better that way anyways...most dispensers are very expensive also

Mar 03, 2010 | Dishwashers

1 Answer

I have had my dishwasher for 3 years. In the past few days the tablet that i put in hasnt been disolving and washing the dishes. The compartment where you put the tablet opens its just the tablet doesnt...


I would say you are not getting any water flow since the water dissolves the tablet.

When starting it listen for the water valve opening and open door and see if there is any water.

If not it is probably the solenoid or a defective or blocked water valve which is not opening.

May 15, 2009 | Frigidaire Dishwashers

2 Answers

Hotpoint aquarius FDW60 FAULT


dishwasher runs for 1 min then stops and 40c indicator and 50c indicator flash on and off together it pumps water out then stops

Jan 03, 2008 | Dishwashers

Not finding what you are looking for?
Hotpoint 24 in. FDW60 Free-standing Dishwasher Logo

Related Topics:

271 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hotpoint Dishwashers Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

bosch5

Level 2 Expert

157 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Hotpoint Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...