On the outside brushed chrome panel a line has formed down the front of the panel and stops short of the bottom. This line has left quiet a noticeable mark down the front making the dishwasher look like trash. It looks like it may be coming from the inside latch but we can never find any moisture outside on the panel.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
A water softner will not make the dishes any cleaner, it just makes it so they don't have water spots on them. If the dishes are dirty, it is most likely that the nozzles (holes) in arms may be plugged. Also check to make sure you are getting plenty of water to dishwasher. Make sure all water valves are full turned open.
If the control panel does not work all the time, it is very likely you have either a shorted wire, or a fualty main board which is very common in newer machines.
Maytag Quiet Series 300. The lights flash in sequence starting from the outside traveling
inward. The timer counts backwards from 50 to 1. Then the sequence
starts over. and continues over and over. I'm able to clear it when the
time reaches 1 or 2. It stays off for a while (3-4 hours) then starts
over. I can not clear the countdown until it reaches 1 or 2. After I
clear it the dishwasher will work, but until then, no way. This happens
with the door open or closed.