Question about Denon AVR-3805 Receiver

Open Question

Connect Denon AVR-3800CI to window media player with Vista home basic

I get network error on the Denon AVR-3800CI when connecting to the window media player. the window meadia player is running on window homw basic

Posted by on

6 Suggested Answers

  • 54 Answers

SOURCE: Best Way ti connect a Denon AVR-1602 Surround Sound system with a Bell Express View Satlite reciever and Plasma TV

lets see, 3100 has no digital out, so you need analog inputs for the audio. Best picture with the 3100, use S-video. Digital input for the DVD sound and S-video in for picture. OOPS....does your TV have a S-Video input ?. If not then you have to use the RCA standard video type connector, as this particular denon doesnt do up or down conversion to or from S-video to old style RCA.

Sorry for the late response.....Rob

PS.....the HD bell wont do you any good with this receiver nbecause it doesnt have component video inputs. Enjoy Bells' superior picture with regular TV . Its way better than cable. Rob

Posted on May 09, 2008

SOURCE: Best Way ti connect a Denon AVR-1602 Surround Sound system with a Bell Express View Satlite reciever and Plasma TV

Is the sub woolfer out powered? My sub woolfer is not

Posted on Jun 25, 2008

  • 1 Answer

SOURCE: DEnon AVR 2807 not giving desired output

You may be able to unplug the unit. Then turn it back on while pressing two buttons on the front of the unit. You will have to find out which two buttons they are, it can't just be any two. What you will be doing to the unit is resetting the micoprossing of the unit. When you do this the unit will flash, reset itself, you the release the buttons and your good as new. I have done this with a couple different reciever and it is a easy fix.

Posted on Sep 28, 2008

Gurudristi
  • 98 Answers

SOURCE: How to connect BLU-RAY DVD player to Pioneer Plasma TV via HDMI

The best possible solution to your problem is :
Connect your blu ray player directly to the HDMI input of you Plasma and watch HD video....
and connect the 5.1/7.1 sound thru the optical or the coaxial link directly to your AVR 3805.
You will not loose anything on the Blu-Ray.
The sound is best processsed by the AVR3805, while the video, which is the real upgrade (BluRay) in terms of resolution of picture would be processed by your plasma.

Connect and Enjoy

Posted on Feb 27, 2009

  • 119 Answers

SOURCE: Remote control for Denon AVR 1706

YES YOU CAN THERE MAYBE A FEW DIFFERENCE BUT YOU WILL BE FINE TO USE IT

Posted on Mar 02, 2009

  • 182 Answers

SOURCE: How do I connect my Apple ipod to my Denon

GET A CONECTION THATS RCA CABLES IN ONE ENND AND HEAD PHONE JACK INTHE OTHER AND CONNECT THE RCA CABLES TO UR INUTS AND THE HEADPHONE JACK TO UR IPOD AND START PLAYING

Posted on Jul 01, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i connect sonos " control " to denon avr 300. Where are audio output on this denon?


The AVR-E300 doesn't have an audio output. It's a very basic AV receiver built down to a price.

Even if you has a better quality receiver, you still would only be able to port sound from analogue sources (ones connected via red & white RCA/phono) to the Sonos Connect for distribution around the rest of your home. AV receivers don't decode audio from HDMI sources to analogue stereo.

If you want to port sound, hook up a source direct to the Sonos Connect's audio input. Don't try going via the receiver.
dce9c598-139b-4c4d-aed0-fecf6462fc85.jpg

Sep 14, 2014 | Denon Audio & Video Receivers

1 Answer

How can I connect my I pod Touch to my Denon AVR 1803 reveiver?


Connect the 3.5mm cable to the iPod headphone output and the two RCA plugs into any unused analogue audio input on the Denon AVR 1803. Then choose the appropriate input on the Denon, press play and enjoy the music. Be careful about volume. Start with the volume on the iPad low and adjust to suit.
Cheers, Don.
6d628830-a930-44fe-8b27-5a639f1bbe40.jpg

Aug 07, 2014 | Denon AVR-1803 Receiver

1 Answer

I have a Denon AVR 1707 reciever. I am trying to connect my dvd player through RGB cables. The sound works just fine when i turn the reciever to dvd but there is no video. I have the component 2 set to dvd...


The video cables--the green, blue, and red ones must be connected from the video OUT portion of the DVD player to the Component 2 video IN of the Denon. It could be the handshake between your Denon and your television. Do you have anything else to connect to the Denon to see if you get a picture? How are you connecting the Denon to the television? Make sure you have your television on the proper input and check the cables going between it and the Denon.

May 25, 2011 | Denon AVR-1707 Receiver

1 Answer

I have a Denon AVR - 391 receiver and was wondering the best way to connect my CD player to as there is no provision for CD player


Sure it does:

http://www.retrevo.com/support/Denon-AVR-391-Receivers-manual/id/23705bh449/t/2/

Analog RCA cables go to anything available: DVD; SAT/CBL; DOCK
and/or
Digital audio goes to whatever is available: COAXIAL (SAT/CBL) or OPTICAL(TV)

Jan 09, 2011 | Denon AVR-787

1 Answer

No dish network sound through denon 1609 receiver


check the setting for the HDMI connection at the Denon you may have to assign the HDMI audio setting also on the front of the Denon while in the DVR mode press the input mode button on the front of the Denon to select auto and if that doesn;t give you sound you will have to connect a cable from the DVR optical.coaxial or analog audio output to the Denon and setup for that type of audio connection

Jan 19, 2009 | Denon AVR588 Receiver

2 Answers

How to connect BLU-RAY DVD player to Pioneer Plasma TV via HDMI


The best possible solution to your problem is :
Connect your blu ray player directly to the HDMI input of you Plasma and watch HD video....
and connect the 5.1/7.1 sound thru the optical or the coaxial link directly to your AVR 3805.
You will not loose anything on the Blu-Ray.
The sound is best processsed by the AVR3805, while the video, which is the real upgrade (BluRay) in terms of resolution of picture would be processed by your plasma.

Connect and Enjoy

Dec 16, 2008 | Denon AVR-3805 Receiver

2 Answers

Connecting a sony blu ray 350 to denon 1601/ home theatre


Yes select audio optical out on your Blu Ray Player under Audio settings and make sure the Denon is set to Optical or Auto in. You should be set to go

Sep 27, 2008 | Denon AVR-1601 Receiver

1 Answer

Set up Denon AVR 3806 to HD DVD player


Geesh! Finally found it in that encyclopedia of an instruction manual. If you have the manual, the solution is on page 63. If not, I'll provide an attached image below.


Dec 23, 2007 | Denon AVR-3806 Receiver

Not finding what you are looking for?
Denon AVR-3805 Receiver Logo

Related Topics:

207 people viewed this question

Ask a Question

Usually answered in minutes!

Top Denon Audio & Video Receivers Experts

 Elex
Elex

Level 2 Expert

49 Answers

jonpoint

Level 1 Expert

4 Answers

Tech Leprechaun
Tech Leprechaun

Level 2 Expert

61 Answers

Are you a Denon Audio and Video Receiver Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...