Can't access mailbox - Logitech Lands Phones

m**[email protected]. We recommend changing your Facebook password immediately.

After entering the mailbox access F981, press "#", the display should change from Pswd: to Log:. Now, enter the alternate mailbox number followed by the password for that box and "#". The remainder of the prompts should be the same as accessing the 'native' mailbox.

To retrieve message from mailbox behind the phone:
Feature 981
Enter your password as asked

To retrieve message from mailbox that is not behind the phone:
Feature 981
Press OTHER
Log = Your ext # and password together
Press OK

Example if mailbox 100 and password 1234 then your log = 1001234

Example if mailbox 221 and password 5678 then your log = 2215678

You need to set a specific password. Probably in RESET password, it's reset to a default value, so if you don't know what the default is, then you can't use it. We usually use x(plus your extension), where x is like a digit 3 or 4, but I didn't install yours :-)


Carl

I don't have a passcode to access my message. Help me please

A "mailbox not set up" message is coming from your telephone line voice mail system, and not from your telephone answeringmachine. What this means is that the voice mail on the phone line is picking up before the answering machine has a chance, and since the mailbox hasn't been set up it can't take any messages. So there are two things you'll need to do.

First, you'll need to set up your voice mail. You may need to contact your telephone service provider for setup instructions since not all systems are the same, but here's how it usually works. From your home phone, call your own number so you reach your voice mail. You should get the message that your mailbox hasn't been set up, and will be prompted for an access code to get to the setup menu. The access code is usually the last four digits of your phone number, and you'll be prompted to change it to something else as part of the setup. Through the setup main menu you can record your greeting and set up other options like the ring count before the voice mail answers. Set it for a number larger than the setting on your telephone answering machine. (I have my answering machine set to 4 rings, and voicemail set to 6.)

Step two is to verify the ring setting on your answering machine. Four rings is a common default setting, but it's adjustable on the phone. Most newer phones have menus that you access from the handset to set change settings, while older models have a switch on the base unit.

Once the mailbox is set up and you have your answering machine set to pick up first, everything will work as you want.

I am going to include a link to the administrator guide for you to download (its in pdf format). However here is what I found in the admin guide:

To change a password:
1. Access the voice mail administrator's mailbox and menu (see page 53).
2. Say "Mailbox Maintenance" or press to access the Mailbox/Group List Maintenance
option.
3. Say or enter the mailbox or extension ID to be accessed. You hear the Personal Options
Menu.
4. Say "Password" or press .
5. If you want a password, enter a new password using digits 0-9 (up to 12 digits) and
press when you are done.Voice mail plays back the password.
If you do not want to use a password, say "Skip" or press . Voice mail announces
that you have chosen not to have a password.
6. Say "Accept" or press to accept the password as entered, or say "Re-enter" or press
to erase and re-enter the password.
7. Hang up or press to return to the previous menu.

If this is not the right section then maybe one of these admin guides will help:

http://www.cmscomm.com/guides/axxesssAdministrator.pdf

http://pointz.com/pdfs/Axxess710AdminGuide.pdf

Hope it all goes well for you

You must have configured OUTLOOK on your computer to access your electronic "mailbox" that was created when you signed-up to use AT&T for your Internet access.

Only the E-mail sent to your '@yahoo.com' ID can be accessed through the "Yahoo! Mail" web-site.

So, setup E-mail "forwarding" through AT&T, so that all E-mail sent to your AT&T mailbox is "auto-forwarded" to your '@yahoo.com' mailbox. Then, use "Yahoo! Mail" in your web-browser to view your E-mail.

You're resetting the wrong password. Keep in mind that mailbox numbers and extension numbers are not always the same. When you're resetting the password, make sure that the EXT assigned to it is the right one !! If you're resetting the reception mailbox, it's usually mailbox 100 (regardless of what the extension number is)

Which ones? A Pana brand VM has an access code of 165. Your personal messages are in your box, the system messages (General Delivery Mailbox) are in mailbox 998. When you dial 165, you're automatically in your box. Mailbox 998 has a special access code that you dial and use to retrieve messages. We try to prevent messages from being dropped into the GDM, but it happens.

Carl