Security code for nokia 6126 pairing with a jabra 250 bluetooth
I am using my husbands phone that's a pair in the rear.. i can't pair my bluetooth device (jabra 250) with my nokia 6126 cause it keeps asking for a security passcode which i don't have a clue on what the nos. can be. i've tried 0000,1234. 12345 and other made up ones.. Can anybody help?
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
u mean while pairing bluetooth device? well, u can type any number as 1234 or 0000, the idea is, u have to type 4digit number that you and receiver know only, so that nobody can hack your connection in the middle of sending data. after you put the four digit number, the receiver must type the same to receive the data you send. that's all..take care
I just had the same problem pairing the Jabra SP5050 with a Motorolla Razr but then realized the default setting on the Jabra is auto-pairing & that may not work with few phone that "discover" bluetooth devices. Solution: Turn off the Jabra SP5050 by pressing the answer button for about 5 seconds; then turn it ON by pressing it 7 seconds (contrast to the normal turn ON with fewer seconds - the bluetooth light should flash continuously) Now the speaker is in manual pairing mode; use the phone's normal discover bluetooth to locate it.
To make this complete: You need to turn off the headset (hold call button several seconds until it makes descending tone). Then hold button to turn on and keep holding 8 seconds more until blue light is on solid. Then initiate pairing at phone, and enter 0000 as the code.
you use your Jabra BT150, you need to pair it with your mobile phone. 1. Put the headset in pairing2 modeMake sure that the headset is on.Press the answer/end button andpress the volume up (+) button at the same time,until a solid blue light comes on.2. Set your Bluetooth phone to ediscoverf the Jabra BT150Follow your phonefs instruction guide. This usually involves going to a esetup,feconnectf or eBluetoothf menu on your phone and selecting the option to ediscoverfor eaddf a Bluetooth device.* (See example from a typical mobile phone in fig. 4)3. Your phone will find the Jabra BT150Your phone then asks if you want to pair with it. Accept by pressing eYesf or eOKf onthe phone and confirm with the passkey or PIN3 = 0000 (4 zeros).Your phone will confirm when pairing is complete. In case of unsuccessful pairing