Need haier tv remote codes for dish network - DISH Network IR Remote Control

allday70, we don't have any current codes for a Haier TV, but we can definitely check it out and help you get that programming.

As there are no codes for that TV, I would recommend trying a power scan. I have posted the steps below, though you can view this link: http://www.dishnetwork.com/SupportSection/remote-setup for general information on setting up remotes.

Power Scan to TV:

1.) With the TV on, press and hold the TV button (about six seconds) on top of the remote until all mode button backlights come on, then release.
2.) Press and release the red power button, then press the Up button once a second while pointing the remote at the TV. If the code for the TV comes up, it will power off.
3.) Press the POUND (#) button. If the code entered is valid for the remote, the mode light flashes three times. To verify the code works try several different functions for that equipment.

Let me know if you have any questions or need further assistance!

Tommy Faust
DISH Network

Hello! I recommend that you try a programming method called a Power Scan this will allow you to search for a code and try the functions as you go. If you only receive partial functionality please repeat steps 2 and 3 until you find the code that works. If there is no functional code the TV button will flash rapidly.
Power Scan
1.) Hold down the clear "TV" button on the remote for four seconds, then press 500 pound ( #)
2.) Hold down the clear "TV" button on the remote for four seconds, press the big power button once.
3.) Press the channel up button once per second until the TV turns off then press pound (#).

Daniel Busa
DISH Network
Customer Service

Hello! My name is Becki Barned, with DISH Network. This process is very simple. Just follow the steps that I have laid out below. I hope this helps!

1. Hold down the Clear TV button until all lights at the top of the remote light up
2. Press the red TV POWER button
3. Press and release the up arrow on the remote about once a second until the tv turns off.
4. When it turns off, press the # (Pound) button
5. Try powering the tv on/off, and try the volume. If one or more of these functions do not work, start over at step 1 again.

Becki Barned
DISH Network Customer Service

We would be happy to help. We currently do not have any codes specifically for your Haier TV, we would recommend performing a power scan. If there is a code that is compatible with your TV the power scan will find it.

Power scan instructions:

Step 1:
Press and hold the TV mode button until all mode button back lights illuminate,then release.

Step 2:
Press and release the Power button.

Step 3:
Press the Up button once a second while pointing the remote at the desiredequipment. If the code for the equipment comes up, the equipment will poweroff.

Step 4:
Press the pound (#) button. If the code entered is valid for the remote, themode light flashes three times.

After doing the power scan please remember to put the remote back into SATmode. Thanks so much for being a valued DISH Network customer!


Phillip Chang
DISH Network Customer Service Representative

Hello, you may have already gotten this resolved, but here are some steps to run through if you have not, or if you have further questions. Follow the link below, and that remote will be working with the volume in no time!!

http://www.dishnetwork.com/SupportSection/power-scan-instructions

Becki Barned
DISH Network Customer Service

We would be happy to help. We currently do not have anycodes specifically for your Haier TV. We would recommend performing apower scan. If there is a code that is compatible with your TV the power scanwill find it. Power scan instructions:

Step 1:
Press and hold the TV mode button until all mode button back lights illuminate,then release.

Step 2:
Press and release the Power button.

Step 3:
Press the Up button once per second while pointing the remote at the desiredequipment. If the code for the equipment comes up, the equipment will poweroff.

Step 4:
Press the pound (#) button. If the code entered is valid for the remote, themode light flashes three times.

After doing the power scan please remember to put the remote back into SAT mode.Thanks so much for being a valued DISH Network customer!


Phillip Chang
DISH Network Customer Service Representative

duckie715

We don't have any codes available for your Haier TV, however, I have provided instructions on how to perform a power scan to locate a code the operate your TV.

http://www.dishnetwork.com/SupportSection/power-scan-instructions

Address To Other Equipment Using Power Scan

• Remote: All Remotes (except Basic)
  1. With the desired equipment on, press and hold the correct Mode button (SAT) until all mode button backlights illuminate, then release.
  2. Press and release the Power button.
  3. Press the Up button once a second while pointing the remote at the desired equipment. Note: If the code for the equipment comes up, the equipment will power off.
  4. Press the POUND (#) button. If the code entered is valid for the remote, the mode light flashes three times.

I had success with code 181.

MJK

The GE Universal Remote will do the job. I have on and it works for my Haier TN201AUV TV. You can also find a replacement Haier remote on Remote Hound's web site.

On the other side of this I have a Dish Network remote that WILL NOT work. The Dish Network remote does not list any codes for Haier. Dish Network Tech Support could offer no help.

In an attempt to solve the problem myself, I looked on-line at GE's site listing all of the manufacturers' for their remotes and found the identical code that worked for my Haier TV also listed under APEX TV's. The Dish Remote lists (11) APEX TV codes. Ironically, NONE OF THEM WORK!

I'm stuck with using both remotes... and that's BULL$H!T