Question about PC Desktops

1 Answer

My priter will not allow me to print pages with color.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 36 Answers

First u know your colour priter is colour priter or not. If yes please see the priter there is colour or not.

Posted on Sep 21, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to print a usage page for HP color laserjet CP2025n


You can print usage page as follows via front control panel on the printer itself.



00af2c3.png


  1. Control-panel display: The display provides information about the product. Use the menus on the display to establish product settings.
  2. Back arrow ( ) button: Use this button for the following actions:
    • Exit the control-panel menus.
    • Scroll back to a previous menu in a submenu list.
    • Scroll back to a previous menu item in a submenu list (without saving changes to the menu item).
  3. Left arrow ( ) button: Use this button to navigate through the menus or to decrease a value that appears on the display.
  4. OK button: Press the OK button for the following actions:
    • Open the control-panel menus.
    • Open a submenu displayed on the control-panel display.
    • Select a menu item.
    • Clear some errors.
    • Begin a print job in response to a control-panel prompt (for example, when the message [OK] to print appears on the control-panel display).
  5. Right arrow ( ) button: Use this button to navigate through the menus or to increase a value that appears on the display.
  6. Cancel Job (X) button: Press this button to cancel a print job whenever the attention light is blinking or to exit the controlpanel
    menus.

Now follow these points to print th required page:

  1. Press OK to open the menus.
  2. Press the Left arrow ( ) or Right arrow ( ) button to navigate to Reports, and then press OK.
  3. Press the Left arrow ( ) or Right arrow ( ) button to navigate through the reports, and then press
  4. OK to print a report.
  5. Press X to exit the menus.
The following information pages are available:
  • Demo page
  • Menu structure
  • Configuration page
  • Supplies status page
  • Network configuration page
  • Usage report
  • PCL font list
  • PS font list
  • PCL6 font list
  • Color usage report
  • Service report
  • Diagnostics report

SOURCE

Oct 25, 2010 | PC Desktops

1 Answer

Only prints in yellow color


The printer must be able print all colors in order to execute the alignment. Part of the alignment process involves scanning printed colored (all colors including yellow) bars. See the web page below for a sample of the printout. I suggest that you clean the carriage and cartridge electrical contacts with a cotton swab moistened with water. If you still fail to get yellow, test the cartridge in another printer. ping me for the make of printer, anyways if it an HP series refer to the website below
http://h20015.www2.hp.com/en/document.jhtml?lc=en&docName=bpu00657

May 01, 2009 | PC Desktops

1 Answer

Error print


what i can understand through the description of your problem is that when you connect the printer the fuse of your mainboard is gone.

please try a main board with higher rating as laser printers consume more power than any other printer.

Jan 08, 2009 | PC Desktops

1 Answer

Have just unpacked new HP Photosmart C4200 All-in-One Cannot get machine to accept cartidges which werre supplied with the printer


NOTE: The product must be on before you can insert the print cartridges.
  1. Open the print cartridge door. Figure 7: Opening the print cartridge door c00880893.jpg
  2. Make sure the print carriage moves to the right. If it does not move to the right, turn the device off, then turn it back on again.
  3. Open the packaging and remove the tape from both cartridges. Figure 8: Removing the tape c00880894.jpg CAUTION: Do not touch the copper-colored contacts or re-tape the cartridges.
  4. Hold the cartridges with the HP logo on top.
  5. Insert tri-color cartridge in the left cartridge slot and the black cartridge in the right cartridge slot . Figure 9: Inserting the print cartridges c00880895.jpgc00880896.jpg
  6. Push the cartridge firmly into the slot until it snaps into place.
  7. Close the print cartridge door.
Step eight: Align the print cartridges When a new print cartridge is installed, the product aligns the cartridge. Align the print cartridges at any other time by using the software installed with the product. Aligning the print cartridges ensures high-quality output. NOTE: If a print cartridge is removed and reinserted, the product will not prompt for an alignment. The product memory retains the alignment values for that print cartridge. Follow these steps to align newly installed print cartridges.
  1. When prompted, make sure that plain, white letter or A4 paper is loaded in the input tray, and then press the button next to OK . The alignment page prints.
  2. Lift the lid. Place the top of the alignment page face-down on the front, right corner of the scanner glass. Figure 10: Placing the alignment page c00880898.jpg
  3. Close the lid.
  4. Press the button next to OK . When the On button stops flashing, the alignment is complete and the page can be removed.

Nov 18, 2008 | HP PC Desktops

1 Answer

My printer does not allow me to print out pages with color.


go to start>printers and faxes> look for your printer and right click on it.. go to properties.. and look for the advance tab.. there.. click on printing defaults... what you see next dependes on your printer properties and features.. look for a setting that says something like "print color images in black and white" and uncheck the box.... look in to the quality or color management section... refer also to your printer documentation.

Sep 21, 2008 | PC Desktops

1 Answer

I am trying to use a Z705 color jetprinter, but cannot get it to print from the pc. I can print from notepad (not using the print file from the tool bar but from the notepad file. I have tried everything....


May be you are not installed well the software driver of the printer. First check the test page of the printer.

For test page see the option of the printer icon.right click icon goto the properties and click test page. Then it will not print well after that put the driver cd into the cd drive and install the software.try it and if the prob comes again please inform to fixya.com

May 12, 2008 | PC Desktops

1 Answer

Computer not in color printing mode


When you go to print, go to properties for the printer you would like to print. Once there find the tab that says color and make sure gray scale is checked off. It could depend though where that setting is at by printer. Please provide what printer you have. Just the brand no product number or anything only if what i gave at first does not help.

Jul 22, 2007 | HP Pavilion a400n (DQ173A#ABA) PC Desktop

1 Answer

Printing problem


Check it's not a software driver fault, uninstall both printers drivers from pc and disconnect the printers and restart. Re-install the driver and then connect the printer when prompted

Jan 07, 2007 | HP Pavilion a1210n (ED895AA) PC Desktop

Not finding what you are looking for?
PC Desktops Logo

Related Topics:

24 people viewed this question

Ask a Question

Usually answered in minutes!

Top PC Desktops Experts

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

Are you a PC Desktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...