An expert who has achieved level 2 by getting 100 points
An expert that got 20 achievements.
An expert that got 10 achievements.
An expert that got 5 achievements.
Re: CANON IR6000 COPIER
Is this a new problem??? Did you replace a major PCB? You may have to reinstall the door spec's back in from the pannel on the front door. Also, is the display sceen cracked? If so you need to replace the display screen... There is not a recaibation screen that I know of....
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
check the counter pcb on the main controller. if the main controller was replaced the original counter pcb MUST be installed on the new main controller. The counter pcb is married to a machine as soon as its powered on and CANNOT be installed on another copier.
You can try to reset error code in service mode, but if the error persist after clear, you need to rectify the problem and replace fault component which is fairly fixing easy to do.
The problem can be in thermistor, sub thermistor or dc controller pcb, or ... call service!
To reset error code:
while ready to copy/showing the error code:
1) Press the user mode key ( * ) on the control panel.
2) Press the 2 and 8 keys at the same time.
3) Press the user mode key ( * ).
Turn off and back on the copier.