Question about Belkin PC Desktops

1 Answer

I can connect Belkin router N Mino(F5D8633ak4A)to myPC (window NT)and can use internet. But internet sign on router is amber about 10-15 minutes and I still can use internet.It will turn to solid blue after that. Another problem is I can connect internet on my labtop(window Vista). I have to disable and enable router on my labtop everytime so my labtop can connect to Belkin router. But I still can't use internet at all. Could you please tell me in detail what I have to do? I am amature. I really appreciate your help. Thanks and regards

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 90 Answers

Hi buddy!

first you move is configure your router to internet connection you have.

by typing 192.168.1.1 or .2 or .3 but most default is .1 and configure it in 1 computer only after that then you can conect all the computer you have ok. if you like more chat me how to configure ok or reply it thnx im willing to help you.

PS:
pls rate me if my solution solve the issue and you need more further information. but if is invaluable solution rate me fixya.

Posted on Sep 21, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Setup belkin wireless network


Hi,
1.Connect a Cat5 cable into the Ethernet port on the back of your cable or DSL modem. Plug the other end of the cable into the "Connect to Modem Internet/WAN" port on the back of the Belkin Router.
2.Connect a Cat5 cable into the "Ethernet" port on the back of any desktop or stationary computers and then plug the other end of the cable into one of the LAN ports on the back of the Belkin Router. Start with port one and work your way up with subsequent computer connections.
3.Turn the Belkin Router on by plugging the router into a power outlet. Allow 30 seconds for the router to fully boot up. All computers tethered to the modem via a Cat5 cable have access to the Internet.
4.Open the Wi-Fi Wizard on your laptop and turn on the Wi-Fi antenna. Once turned on, the Wizard finds all network connections in your area. Connect to your network to establish an Internet connection. Complete this step for each computer not tethered to the Belkin Router with a Cat5 cable.

Thanks for using Fixya
Proton

Oct 04, 2010 | PC Desktops

1 Answer

Was working ok, now cannot get online using belkin modem-router. Says I am connected to my network, "signal strength excellent" but no wireless connection. Using the Belkin Modem router I am unable to...


please try to reset your router.

on the back of the router there is a little hole where you can insert a pen or a paperclip. hold it pressed in for 30 seconds and then release.

wait 10 minutes and try to connect to internett again (after connecting to the wireless net ofc)

May 28, 2009 | PC Desktops

1 Answer

My Belkin 4 port router has the same IP as my Modem so my router will not detect my DSL connection. Ive asked Belkin for help but all they send me is gobblygoop!


Hi!
I'm sorry to hear that Belkin did not help you with your problem. Let me help you with your concern instead.

Here's what we need to do:

Start by resetting the router to factory default - you just need to press and hold the rest button on the router for about 30 seconds (with the power on).

1.) Disconnect the Belkin router from your modem , connect a PC to the router (use the LAN port - either port 1 to 4).

2.) Open Internet browser - clear the address bar and type in http://192.168.2.1 , press enter. It will ask you for a password , do not type anything just press Submit. You should be able to access the router's web interface.

The router's web interface should like this (depending on the model #):

92853d1.jpg



3.) Go to LAN settings. Change the router's IP address to 10.10.10.1 (this will be the new IP address of your router) . Apply the changes. Once youapply the changes, you can access the router using the new IP - http://10.10.10.1.

4.) Reconnect your modem - router and computers. Reboot device by switching off the modem , router and PC.

5.) Power up the modem first. Wait for about 2 minutes, power up the router and restart your PC.

The steps I gave is applicable if your modem is not on bridge mode. If your modem is on bridge mode (meaning it requires a username and password from your ISP) - access again the router by going to http://10.10.10.1 and do the following:

Click Internet WAN > Connection Type and select PPPOE. Type the username and password from your ISP. Apply the settings. Reboot the modem and router.


I hope that helps.

Good luck and have a nice day!

Nov 25, 2008 | Belkin PC Desktops

1 Answer

I cannot get the internet on my main computer that has the Belkin Router connected to it, the blue light for internet on Router is now flashing orange. Thank You Peter


disconnect the power suppy from the router for a minute or so, then plug it back in, give it a minute to reset and try again
hope this helps
regards

Nov 20, 2008 | Belkin PC Desktops

1 Answer

I am no longer able to connect to the internet via my belkin router


shut down your computer. next unplug the power cord on your cable or dsl modem and router.
Wait 10 minutes. first plug in your cable or dsl modem and wait for all the lights to come on steady. Next plug in your router and wait for those lights to be steady now turn on your computer. it is called power cycle. try this first

Oct 23, 2008 | Belkin PC Desktops

1 Answer

Belkin router when connected will send wireless signal but will not allow mother computer to gain access to internet. tried bridging on dsl, and pinging. when i called belkin the @#$%^& told me it...


Assuming your router is set correctly to your modem or the password and username are set correctly in a modem/router, make sure DHCP is enabled in the router, this gives each pc an ip address automatically.

Go to open internet explorer>tools>internet options>connections tab and ensure never dial a connection is ticked or greyed out. close IE

go to network connections, right click on your wireless adapter>properties>highlight TCP/IP line>properties and make sure that obtain an ip address automatically is ticked.

Open up internet explorer again and click refresh a few times, it will detect the proxy server then should connect, if not then the router configuration is wrong.

Sep 09, 2008 | Belkin PC Desktops

2 Answers

Belkin wireless G router-2.4Ghz-802.11g ,i,m not getting the internet conection via router .pls help or give me tel no to contact u..i've been using the router for more than a year now and there was no...


Go to the Belkin support section at their website: http://www.belkin.com/support/

Look for your model router and download the "firmware" upgrade for it. Once you go install the up to date firmware try to give the router a reset. Hopefully doing all that will get the router working again and you connecting to the Internet.

Aug 16, 2008 | Belkin PC Desktops

1 Answer

Cannot finish installation (Belkin F5D8633-4 wireless modem router N mimo)


ok, obvious questions first:

Do you have a different modem from TALKTALK? can you connect to the internet through that?

if so, you may not have to set a username and password for the belkin router: just connect the belkin router's internet port to the talktalk modem and let the talktalk modem handle the automatic connection.

do you know what protocol the talktalk ISP uses?  it's probably PPPOE; make certain that your belkin router is set to the correct protocol.  if you just hook it up to the talktalk modem though, you probably won't have to specificy a protocol at all.

Mar 29, 2008 | PC Desktops

Not finding what you are looking for?
PC Desktops Logo

Related Topics:

80 people viewed this question

Ask a Question

Usually answered in minutes!

Top Belkin PC Desktops Experts

Michael Thomas
Michael Thomas

Level 3 Expert

3051 Answers

Gareth Cockram
Gareth Cockram

Level 3 Expert

657 Answers

Douglas  Erikson
Douglas Erikson

Level 2 Expert

62 Answers

Are you a Belkin PC Desktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...