Question about Whirlpool Dryers

1 Answer

Whirlpool Ultimate Care II LGQ9558kQ1 is not spinning

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,122 Answers

Can you hear the motor?if not your door switch or main fuse inside the dryer is bad,if you pop the top you can see the belt and fuse,let me know,mike

Posted on Sep 20, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My whirlpool ultimate care II electric dryer won't


Hi,

There can be many reasons why your dryer will not start or turn...

The most common causes are the belt breaking or jumping off, or the motor goingbad...

Here are a couple of tips that I wrote will help you to figure out why yourdryer will not run...

Dryer Repair - The Dryer is not Turning

Dryer Repair - The dryer will not start


heatman101

Jul 21, 2011 | Whirlpool Dryers

1 Answer

Whirlpool ultimate care ii dryer, only works when continuosly pressed the start button. What can be the problem. whirlpool ultimate care ii dryer model gew9878lw0


More likely than not either the start/run switch on your motor wen't bad, or the motor windings itself. Either way you need to replace the motor #279827 around $100 on up.
Not tough to get to if you know how to gain access to the cabinet, just remember that the blower wheel and motor threads going into the blower wheel are LEFT hand thread,
have fun, and best of luck,
ttfn

Feb 04, 2010 | Whirlpool Dryers

1 Answer

We have a Whirlpool Ultimate Care II gas Dryer that is getting intermittant heat. Sometimes it will heat, sometimes it won't. Iin addition, today it stopped rotating as well. Ideas?


Could just be a matter of wires coming loose. The movement and vibration of the spinning could have shaken wires loose. look for any wires not connected to anything.

Nov 06, 2009 | Whirlpool GGQ8831L Gas Dryer

1 Answer

Our Ultimate care II dryer heats but does not spin. I figure it needs a new belt, just wondering what the part number is and where I can get it locally (Rochester, NY 14612)


fortunatly for you
the whirlpool belt is a pretty standard part,
any of the sears parts store, or any appliance parts store in your local area should have one
it is very common
part number'
8066065 with a sub to 341241 runs around 20.00

AP wagner elmgrove rd
585-254-2274

Oct 16, 2009 | Whirlpool LGB6300 Gas Dryer

1 Answer

Whirlpool Ultimate Care II Dryer timer knob


The timer cam is not aligning the internal switches. Replacing it is the only fix.
Eric

Sep 17, 2009 | Kenmore 62602 Electric Dryer

1 Answer

I have a whirlpool gold ultimate care II electric dryer and have to dry everything on high twice to get it dried. any suggestions?


first how is the clothes out of the washer? That might not be spinning fast enough in final spin. When was the last time the dryer vents was cleaned. Do you have a flow out the vent? If so then something might be going on with sensors.

May 18, 2009 | Whirlpool GGQ8831L Gas Dryer

1 Answer

Whirlpool Ultimate Care II LGQ9558KQ! is not spinning. Whre is the belt?


galitbunny
Welcome to our site.

You siad, the dryer is not spinning.


Can you hear the motor?
If you can not hear it then not your door switch or the main fuse inside the dryer is bad.
You pop the top and you will see both the belt and the fuse.


Let me know how you are.
Bless You,
Huuum

Sep 20, 2008 | Whirlpool Dryers

1 Answer

Ultimate care II Whirlpool dryer


yes its located on the houseing where the heating element is and is a small round disc with two wires get a putty knife and push in between the top panel and body of the drier about 2-3inches of the edge lifting the top as you do remove the front panel by removing the two 5/16 in screws and pull the panel the locate the heating coil and check the thermal limiter

May 24, 2008 | Dryers

1 Answer

Appliance rewiring wiring WIRLPOOL ULTIMATE CARE II


The Whirlpool Ultimate Care II cannot be outfitted for a standard 115 VAC wall outlet. Your dryer is a 220 VAC appliance. It needs to have it own dedicated 30 amp, 220 VAC circuit with the proper outlet and power cord installed. The dryer heating circuits and timer will not run on 115 VAC. I think you need to reconsider what you are about to do...

Jan 23, 2008 | Dryers

Not finding what you are looking for?
Dryers Logo

Related Topics:

172 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Dryers Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Tim Whalen

Level 3 Expert

3056 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Are you a Whirlpool Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...