Question about Samsung HT-TQ85 Five DVD 5.1 Channel Home Theater Audio System System

3 Answers

Problem "protect" whenever i try to turn it on, it says "protection" then it turns off right away by itself. anyone know how to fix this problem? Reset dont work.... =/

Posted by on

  • 2 more comments 
  • cathy_her Oct 26, 2008

    My Samsun HT-TQ85 comes on then it will say protection and good bye.

  • gracieeeex3 Jan 06, 2009

    I rented a dvd from blockbuster, but when i try to eject it by turning it on, the player says hello and protection then it shuts off immediately!

  • Anonymous Jan 30, 2009

    Same problem, power cycling doesn't seem to help. Last thing I did on it was watch a video via UCB divx. The model number is HT-TZ315

  • Anonymous Mar 24, 2009

    Same problem. Samsung told be it could be a fan problem. I'll try to change it and see what happens.

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Hey guys, just had the same problem and found out it was because I had disconnected the central speaker. This it was creating a back impedance or something and reonnecting did the trick! i.e. check your speaker connections and check that they work... duff speakers could cause the problem too!

Posted on Feb 22, 2009

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

When I turn on my Samsung HT-TQ85 it says protection and then good bye and shuts down. Help?

Posted on Oct 26, 2008

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Tenho um problema no meu ht-tz315 que diz proctec

Posted on Sep 13, 2010

2 Suggested Answers

silly girl
  • 513 Answers

SOURCE: "protection"

I ran across this problem before, the only solution the guy found was resetting the receiver, here''s how to do it:

Posted on Jan 30, 2006

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hii I have sony shake 6D system and whenever I turn the volume up it reaches upto 40 and shows the error of 'protect E01' while the maximum volume is 50. Please help


Most likely, your unit is shutting down due to overheating. You cannot run an amp at that kind of volume very long. It is shutting down to protect itself. Try running the amp at 1/3 your normal level. Most likely, it will not shut down.

Aug 05, 2015 | Sony Audio Players & Recorders

2 Answers

"S-Protection"


I have disconnected all wires from the back of player, and it still turns off and says "s-protection". If I unplug it and plug it back in, it will work for about 30 seconds then goes off. Would that mean there is a short inside the unit itself?

Mar 16, 2014 | LG BH9230BW 1460W 9.1-Channel 3D Smart...

1 Answer

My Yamaha RX-V2095 Is Shuting Itself Off Whenever I Turn Volume Up


The reason that the receiver is shutting off is that it is trying to protect itself...The speaker connections are usually the culprit...check the speaker wires carefully to make sure that they are in good shape.Check from one end to the other.I once has an incident where mice were chewing on the wires and they shorted out...I this checks out....make sure that they are connected to the receiver with the proper polarity(+positive to positive red....and -negetive to negative black) with no stray strands touching each other...let me know if this helps...PEACE....

Jan 05, 2012 | Yamaha Audio Players & Recorders

1 Answer

When i turn on my samsung HT-Z110, the word "Protect" appears...


Protect mode will kick in whenever a fault is detected.

You get the unit not powering up, and sometimes you hear a clicking noise, that is the protection switch that keeps shutting down the unit.

Causes that can start protect mode are:

Electrostatic harges on internal circuits.
Leave the unit unplugged for power for one hour or so, this will allow discharge.

Bad speaker wiring.
Check speaker wiring, try unplugging and plugging back, or start after removing one speaker at the time.

Internal fault.
Internal fault is the natural cause for protect mode. If all the above did not work, then the problem is a blown component or an internal fault. In this case the unit must be taken apart , tested and repaired by an experienced person.
If the unit is less than one year old, or if you want to get service, call Sony at the phone number listed on the product documentation.

Regards.

Mar 19, 2009 | Samsung HT-Z310T Theater System

1 Answer

Home theater suddently turn off


Protect mode will kicking whenever a fault is detected.

Causes that can start protect mode are:

Electrostatic harges on internal circuits.
Leave the unit unplugged for power for one hour or so, this will allow discharge.

Bad speaker wiring.
Check speaker wiring, try unplugging and plugging back, or start after removing one speaker at the time.

Internal fault.
Internal fault is the natural cause for protect mode. If all the above did not work, then the problem is a blown component or an internal fault. In this case the unit must be taken apart , tested and repaired by an experienced person.
If the unit is less than one year old, or if you want to get service, call Sony at the phone number listed on the product documentation.

Regards.

Aug 12, 2008 | Samsung HT-P38 System

1 Answer

Protection flashing and the system turns off


You need to take it in for service. I work at an authorized JVC service center and can tell you that you now have a serious problem. It could be the amplifier or the power supply causing it. The protect circuit will activate for several different reasons and only a properly trained technician with the right tools can determain just what the problem is. I don't berlieve that trying to play the disc you mentioned would have any relation to the cause of the problem, it is most likely just a coincidence that it happened at the same time.

Before you take it in, try this.

Unplug all the speakers and then see if it will turn on and stay on. If it does stay on you may have a bad speaker. Turn it back off again and then connect one speaker at a time and turn it back on. If it shuts off in protect when you connect the first speaker, unplug that speaker and try another. If it still shuts off and goes to protect with a different speaker you have an amplifier problem. If it stays on with another speaker it may be the previous speaker is causing the problem, so take it in to be checked. Whenever you connect a speaker and then the unit goes to protect, it may be the speaker that was just connected that is causing the problem. This is not 100% all the time, but it is a pretty good indicator that is worth trying before spending money on a repair.

If the unit goes to protect even with no speakers connected you have an internal power supply or amplifier problem for sure.

Le tme know if you need any more help.

Dave

Aug 06, 2008 | JVC TH-A25 System

1 Answer

Protection Problem on Samsung Digital Home Theater


Protect mode will kicking whenever a fault is detected.

Causes that can start protect mode are:

Electrostatic harges on internal circuits.
Leave the unit unplugged for power for one hour or so, this will allow discharge.

Bad speaker wiring.
Check speaker wiring, try unplugging and plugging back, or start after removing one speaker at the time.

Internal fault.
Internal fault is the natural cause for protect mode. If all the above did not work, then the problem is a blown component or an internal fault. In this case the unit must be taken apart , tested and repaired by an experienced person.
If the unit is less than one year old, or if you want to get service, call Sony at the phone number listed on the product documentation.

Regards.

Apr 14, 2008 | Samsung HT-DS610 System

2 Answers

Protect


The protect message indicates that a problem was found in the output stage of the amplifier. Unless this gets repaired, nothing will work. As a verification that the speakers or the wires are not the problem, unplug all of the speakers and try again. If protect still is displayed, the problem is inside the unit.
Dan

Apr 09, 2008 | Sony DAV-S400 System

3 Answers

JVC XV-THA25


Fixed it by replacing a burned resistor.
100ohm 1 wat designation PR010 on the main pcb.

Feb 09, 2008 | JVC TH-A25 System

4 Answers

"protection"


I ran across this problem before, the only solution the guy found was resetting the receiver, here''s how to do it:

Jan 30, 2006 | Samsung HT-DB390 System

Not finding what you are looking for?
Samsung HT-TQ85 Five DVD 5.1 Channel Home Theater Audio System System Logo

Related Topics:

2,071 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Audio Players & Recorders Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6445 Answers

sonic boom...
sonic boom...

Level 3 Expert

1557 Answers

Are you a Samsung Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...