Question about Konica Minolta bizhub 350 All-In-One Laser Printer

1 Answer

Konika minolta bizhub 350 fax no answer

I have 4 bizhubs. All four can send faxes to some numbers successfully however, I am getting "no answer" transmissions on each machine for other numbers). If I fax using a regular fax machine to the "no answer" numbers I was gettng on the bizhub -- they go through fine. They are consistently the same numbers that are "no answer". I have had the phone lines checked and the bizhubs. I have also checked with the recipients -- they are not having problems with their fax machines and can recieve faxes from us using non bizhubs -- any suggestions??

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 167 Answers

Try altering the maximum nuber of rings until it relays the no answer message.

I am not sure exactly where that is.

ALso, you could try turing on the phone line volume so you can listen to what is heppening.

Posted on Sep 22, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Bizhub 350 cannot receive faxes


There are two clips on the fax PCB, make sure you are using the Line and not the handset. Also, do you have the fax card installed and did it ever receive faxes? It may be a issue with the phone line.... Good Luck

Nov 16, 2012 | Minolta bizhub 350 Black and White Copier

2 Answers

I have a konica bizhub 200. We can send faxes out


As a first thing to try, with most faxes that send but do not receive, it's usually down to a glitch.

Try shutting the bizhub down fully, then unplugging it physically from the power source for at least 30 seconds. Plug it back in and turn the unit back on, then have someone try and send you a fax.

If this does not remedy your problem, please indicate with a follow-up comment.

Aug 28, 2009 | Minolta bizhub 200 Copier

3 Answers

BizHub 350 Network Fax - Prints instead of faxing


Set the Gateway TX to "Allow"

1. Press the Utility/Counter button.
2. Touch Admin Management
3. Enter Password (The default password is 12345678)
4. Touch Admin2
5. Touch Network Settings
6. Touch Network Settings1
7. Touch Scanner Settings
8. Touch Gateway TX
9. Set Gateway TX to Allow

Dec 23, 2008 | Konica Minolta bizhub 350 All-In-One Laser...

1 Answer

Internet Fax.


f you want to know complete procedure how to send an internet fax, then please call your nearest technical services representative,

Dec 16, 2008 | Konica Minolta bizhub C250 All-In-One...

2 Answers

Question about Konica Minolta Bizhub 350


click here for the steps on how to configure the bizhub 350 and here for the vista driver that you need to use if you're going to install it in a vista computer

hope this'll help you

ciao

Aug 26, 2008 | Konica Minolta bizhub 350 All-In-One Laser...

Not finding what you are looking for?
Konica Minolta bizhub 350 All-In-One Laser Printer Logo

560 people viewed this question

Ask a Question

Usually answered in minutes!

Top Konica Minolta Printers & Copiers Experts

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

5695 Answers

David Burkhart
David Burkhart

Level 2 Expert

207 Answers

George Mclaughlin

Level 2 Expert

330 Answers

Are you a Konica Minolta Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...