When i click print paper feeds through but comes out blank

HP DeskJet f4280 Spitting Out Blank Paper. - HP Support ...

h30434.www3.hp.com > Printers & All-In-Ones > Print Issues

10 posts
Solved: I can hear it printing, but the paper is blank when it's finished. ... Mark as New; Bookmark; Subscribe; Subscribe to RSS Feed · Highlight · Print · Report ... green checks say every thing is good to go, but the test print comes out blank,. ... Reinstall the cartridges into the product, and then gently close the cartridge door.

my printer is printing blank pages, and i just changed ink

It doesn't print on it because one of two things: either the paper is not the size the printer expects it to be, or the paper doesn't feed properly.

Change the ink cartridge first an foremost,
then do a few print head cleans to flush out the blocked nozzles. it may come back after 4 or 5 cleans
good luck!

Pages 47 & 48 in the user guide refer to selecting manual feed, paper size and paper type in the Properties tab > Paper etc. I assume this was set accordingly for labels?

You probably need a new printhead, but that problem cann also be caused by the purge or cleaning station not working properly. If you do a cleaning cycle with no carts. and the little pads in the printhead come back with no ink on them then the purge is working and you need a new printhead.

check if there is still ink in the cartridge.also use a soft cloth and little water to clean the nozle of the cartridge.

try to reload your catridge on the carrier or cartridge holder..
and clean your printer tab circuit and also the cartridge tab circuit and run maintenance page on it..
go to your printer panel and select maintenance ..browse clean printhead..and print maintenance page..to clean the cartridge..

Change the print / xerographic module.

all my cartridges are full/newly changed. my epson stylus cx5200 keeps on feeding papers, displaying printing message but with no actual print out i.e. blank paper comes out. please help. thanks!!


Darren.

[email protected]

When you print an envelope, let the printer print on a regular sheet of paper to see if it's printing in an area not in line with the envelope.

This example is from Open Office. Microsoft is pretty much the same. What this is showing is the position of the envelop feeder so you know which one to select so that it can print correctly. The software must be set up correctly. The arrows show the path of the paper feed.

To find this in Office, click on TOOLS, LETTERS AND MAILINGS, ENVELOPES AND LABELS.

Click on the envelope in the FEED box.

This window will show the feed position of the envelope using an 8x11 as a point of reference.