Question about Washing Machines

1 Answer

JUMPING WHIRLPOOL WHIRPOOL WASHER VIBRATES A LOT DURING CYCLES, REARANGING LOAD NO HELP

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 116 Answers

Hey micos
Is this a brand new machine? working for the fist time?

Post a response

Posted on Sep 20, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Durning the spin cycle, the washer is jumping all over the place


One or more of the suspension springs have failed. Here is a link to the spring.

Take a look at this video.

Oct 15, 2012 | Whirlpool ATW4475VQ Washer

1 Answer

My whirpool WFS1071BD front load washing machine leaking when spinning


During drain and spin only A washer that leaks only during the spin cycle often has a leak in the main drain hose. Inspect the entire hose and correct any problem you find.

Oct 14, 2012 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Washer vibrating badly


Hi, Try these
  1. Balance the load
  2. Level the machine
  3. Inspect the water pump for a blockage
  4. Inspect the coupling
  5. Inspect the transmission
  6. Adjust the drive belt tension
  7. Check the motor bearings
  8. Check the drum brakes
pls rate my suggestion......

Jul 19, 2009 | LG Washing Machines

2 Answers

Washer vibrates during spin cycle


Front loaders have to be situated on solid flooring such as a basement or they will vibrate.
http://tclaundryrepair.com/

Feb 20, 2009 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Whirlpool washing machine


Welcome hendrik,
You said, jumping around during spin cycle


How old is your GHW9150 washer?

Usually it is overload or load unbalanced due to uneven load.You must stop the machine and re-distribute the load and or weight!

Here are some Whirlpool reasons for you.
But if nothing helps you may have a mechanical problem to be serviced!


Try these ideas first!

Is the load balanced?

A single or bulky item may cause imbalance. Add more items
or redistribute the load.
Washer makes noise or vibrates
Is the washer level?
The washer must be level. The four feet should be properly
installed, and the nuts should be tightened against the
washer cabinet.
As water is drained from the washer, you may hear air being
pulled through the pump. This happens during the end of
draining. It is normal.
Are you washing items with metal snaps, buckles or zippers?
You may hear metal items touching the washer drum. This is
normal.
Is washer installed on a sturdy and solid floor?
Refer to the “Installation Instructions” for flooring
requirements. Noise and vibration may be reduced by placing
a piece of ¾" (19.1 mm) plywood underneath your washer.
The plywood may extend underneath both washer and dryer
to keep them at equal heights.
Let me know If you have any questions and what happens!!!
Huuum
Please remember to leave a rating!

Oct 11, 2008 | Whirlpool Duet GHW9150P Front Load Washer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

96 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...